Burkert Type 3003 User manual

Operating Instructions
Bedienungsanleitung
Manuel d‘utilisation
Type 3003
Electrical rotary Open/ClOse actuator
Elektromotorischer Drehantrieb Auf/Zu
Actionneurs électriques Ouvert/fermé

We reserve the right to make technical changes without notice.
Technische Änderungen vorbehalten.
Sous réserve de modifications techniques.
© 2011 Bürkert Werke GmbH
Operating Instructions 1101/00_EU-ML_00809466 / Original DE

3
1. OPERATING INSTRUCTIONS ...................................................................4
1.1. Symbols ..............................................................................................4
2. INTENDED USE ................................................................................................5
2.1. Restrictions ........................................................................................5
2.2. Foreseeable misuse .........................................................................5
3. GENERAL SAFETY INFORMATION ........................................................6
4. GENERAL INFORMATION ...........................................................................7
4.1. Contact address ............................................................................... 7
4.2. Warranty ............................................................................................. 7
4.3. Informations in the Internet .............................................................8
5. SYSTEM DESCRIPTION ...............................................................................8
5.1. Intended area of application .......................................................... 8
5.2. General description .........................................................................8
5.3. Options ............................................................................................... 9
5.4. Marking ...............................................................................................9
5.5. Type label ...........................................................................................9
6. TECHNICAL DATA ........................................................................................10
6.1. Conformity .......................................................................................10
6.2. Standards .........................................................................................10
6.3. Approval ...........................................................................................10
6.4. Operating conditions .....................................................................10
6.5. General technical data ..................................................................10
7. INSTALLATION ...............................................................................................14
7.1. Safety information ..........................................................................14
7.2. Power and control connections ..................................................14
7.3. Connecting the additional limit switches (optional) ...............15
7.4. Circuit board for actuator with standard signal input ............16
8. ROTARY ACTUATORS WITH INTEGRATED EMERGENCY
RESET.......................................................................................................................20
8.1. Safety block for emergency power version ..............................20
8.2. Technical data .................................................................................20
8.3. Electric wiring ..................................................................................20
8.4. Circuit board ...................................................................................21
9. OPERATING .....................................................................................................21
9.1. Safety information ..........................................................................21
9.2. Manual operation of the rotary actuator ....................................22
9.3. Returning from manual to automatic operation .......................22
10. MAINTENANCE AND REPAIR ..............................................................23
10.1. Safety information ........................................................................23
10.2. Maintenance ..................................................................................23
10.3. Malfunctions ..................................................................................23
11. TRANSPORT, STORAGE, DISPOSAL ..............................................24
Contents
english
Type 3003

4
Operating Instructions
1. OPERATING INSTRUCTIONS
The operating instructions describe the entire life cycle of the device.
Keep these instructions in a location which is easily accessible to
every user and make these instructions available to every new owner
of the device.
The operating instructions contain important safety
information!
Failure to observe these instructions may result in hazardous
situations.
• The operating instructions must be read and understood.
1.1. Symbols
DANGER!
Warns of an immediate danger!
• Failure to observe the warning may result in a fatal or serious
injury.
WARNING!
Warns of a potentially dangerous situation!
• Failure to observe the warning may result in serious injuries or death.
CAUTION!
Warns of a possible danger!
• Failure to observe this warning may result in a moderately
severe or minor injury.
NOTE!
Warns of damage to property!
• Failure to observe the warning may result in damage to the
device or the equipment.
Designates additional significant information, tips and
recommendations.
Refers to information in these operating instructions or in
other documentation.
→designates a procedure which you must carry out.
english
Type 3003

5
Intended use
2. INTENDED USE
Non-authorized use of the electrical rotary actuator Type
3003 may be dangerous to people, nearby equipment and the
environment.
• The device may be used outside.
• During use observe the authorized data, the operating conditions
and conditions of use specified in the contract documents and
in the operating instructions. These are described in the chapter
entitled „Technical Data“.
• The device may only be used in connection with third-party devices
and components recommended or approved by Bürkert.
• Requirements for safe and proper operation are proper trans-
port, storage and installation as well as careful operation and
maintenance.
• Only use the device as intended.
2.1. Restrictions
Observe any existing restrictions that apply to the device to be exported.
2.2. Foreseeable misuse
• The electrical rotary OPEN/CLOSED actuator Type 3003 may not
be used in potentially explosive atmospheres (in this case please
use type 3004).
• Do not subject the housing to mechanical loads (e.g. by placing
objects on the housing or using the housing as a step).
• Do not make any unauthorized modifications to the device housings.
Do not paint any part of the housing or screws.
• Do not install the actuator with the cover facing down (head first).
• When installing the actuator, observe a minimum distance of 30 cm
to electromagnetic sources of interference.
english
Type 3003

6
General safety information
3. GENERAL SAFETY
INFORMATION
This safety information does not cover:
• Haphazard situations that can arise during installation, operation and
maintenance of the use.
• Locally applicable safety regulations which the operator and instal-
lation personnel are obligated to follow.
DANGER!
Hazard due to electrical voltage!
Intervention in the device poses an acute risk of injury.
• Before starting work, be sure to switch off the supply voltage
and secure it to prevent restarting!
• Always connect multiple electrical rotary OPEN/CLOSED
actuators with phase isolation via a switch.
• Observe all applicable accident protection and safety guidelines
for electrical equipment!
WARNING!
Unintentional operation or impermissible damage can lead to
generally dangerous situations as well as physical injury!
• Take appropriate measures to prevent the possibility of uninten-
tional activation of the device!
WARNING!
Dangerous situations can arise during installation and main-
tenance work!
• This work may only be carried out by authorised technicians
using appropriate tools!
• Ensure a defined or controlled restarting of the process after an
interruption in the electrical power supply!
CAUTION!
The general rules of technology apply to the planning and
operation of the device!
If you fail to observe these rules, injuries may result and/or the
equipment and even its surroundings may be damaged.
• Observe the general rules of technology!
The electrical rotary OPEN/CLOSED actuator Type 3003 was
developed with due consideration given to accepted safety
rules and is state-of-the-art. However, dangers can still arise.
Failure to observe this operating manual and its operating instructions
as well as unauthorized tampering with the device release us from
any liability and also invalidate the warranty covering the devices
and accessories!
english
Type 3003

7
General information
NOTE!
Electrostatically sensitive components / modules!
The device contains electronic components that react sensitively
to electrostatic discharge (ESD). Contact with electrostatically
charged persons or objects will endanger these components. In
the worst case, they will be immediately destroyed or will fail after
commissioning.
• Observe the requirements according to EN 61340-5-1 in order
to minimise or avoid the possibility of damage through sudden
electrostatic discharge.
• You should also ensure that the electronic components do not
come into contact with nearby operating voltage.
4. GENERAL INFORMATION
4.1. Contact address
Germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: [email protected]
International
Contact addresses are found on the final pages of this operating
manual.
And also on the Internet under:
www.burkert.com
4.2. Warranty
The warranty is only valid if the electromotive rotary actuator type
3003 is used as intended in accordance with the specified application
conditions.
english
Type 3003

8
System description
4.3. Informations in the Internet
The operating manual and the data sheets on Type 3003 can be found
on the Internet under: www.burkert.com
5. SYSTEM DESCRIPTION
5.1. Intended area of application
The Electrical Rotary OPEN/CLOSED Actuator type 3003 (referred to
as rotary actuator in the following) is designed for ball or flap valves.
5.2. General description
Due to its modular construction, the basic device can be extended
with many options.
Options for expanding the basis device are found in chapter
„5.3. Options“.
The rotary actuator is designed for direct or alternating current with a
varied rating and available for torques of 10, 20, 35, 60 or 100 Nm.
The materials used guarantee maintenance-free operation and ensure
a low thermal load.
All rotary actuators are equipped with a standard emergency manual
control and two additional limit switches and are tested by the manu-
facturer. The limit switches are set for a 0 ... 90° operating range.
english
Type 3003

9
System description
5.3. Options
• Additional limit switches
• Rotary actuator with feedback potentiometer:
- Potentiometer with resistance values of 100 W, 1 kW, 5 kW,
10 kW
- Analogue feedback via 4 ... 20 mA signal
• 3rd position (180°)
• Actuators with integrated fail safe function (see chapter „8. Rotary
actuators with integrated emergency reset“)
5.4. Marking
The rotary actuator is fitted with a type label which enables clear iden-
tification and provides the most important technical data.
Do not remove the type label from the rotary actuator!
It is extremely important for identification during installation
and maintenance.
The warranty is void without the type label.
5.5. Type label
3003 / 225431
~ 24 V 50/60 Hz
Fluid Control Systems
IP66 OF N°460050/79
24 V
90° 20 Nm 15W
10/11 S46
Protection class, Serial number (internal)
Type, Identification number
Operating voltage
Torque, Rating
Operating voltage
Fig. 1: Location and description of the type label
english
Type 3003

10
Technical Data
6. TECHNICAL DATA
6.1. Conformity
The electromotive rotary actuator Type 3003 conforms to the EC
Directives according to the Declaration of Conformity.
6.2. Standards
The following standards satisfy conformity with the EC Directives:
EN 61000-6-2, EN 61000-6-4, EN 61010-1
6.3. Approval
The approval mark found on Bürkert type label refers to the Bürkert
products.
6.4. Operating conditions
Ambient temperature: -10 °C ... +55 °C
Permissible areas of application: 0 ... 2000 m altitude
Permissible humidity: < 81 % to 31 °C (88 °F) with
linear decrease as far as 50 % at
40 °C (according to EN 61010-1)
Protection class: IP66 with device socket
6.5. General technical data
6.5.1. Mechanical data
Dimensions: See data sheet
Weight: 1 kg (20 Nm)
2.1 kg (35-100 Nm)
Materials
Cover: Nylon
Housing: PA (Nylon with glass fibre)
Axis / screws: Stainless steel
Gears: Stainless steel and PC (Polycarbonate)
Range of movement: 90° ± 5° (optional 180°, 270°)
Duty rating: 50 % at max. torque
6.5.2. Electrical data
Electrical connections: Device socket according to
EN 175301-803
Cable gland ISO M20
Limit switches: 4 adjustable (2 for the motor and 2 addi-
tional ones for feedback signal) -
max. 250 V AC / 5 A
english
Type 3003

11
Technical Data
Electrical data for version without analog input signal:
Torque
90° Posi-
tioning time1)
(Specifica-
tions under
load)
Power
consumption Voltage / Frequency
20 12 s 15 W 15-30 V AC, 50-60 Hz /
12-48 V DC 2)
100-240 V AC, 50-60 Hz /
100-350 V DC
35 7 s 45 W 15-30 V AC, 50-60 Hz /
12-48 V DC 2)
100-240 V AC, 50-60 Hz /
100-350 V DC
60 12 s 45 W 15-30 V AC, 50-60 Hz /
12-48 V DC 2)
100-240 V AC, 50-60 Hz /
100-350 V DC
100 23 s 45 W 15-30 V AC, 50-60 Hz /
12-48 V DC 2)
23 s 45 W 100-240 V AC, 50-60 Hz /
100-350 V DC
1) Other positioning times on request
2) The operating voltage must not drop below 11.5 V
Electrical data for version with analog input signal:
Torque
90° Posi-
tioning time1)
(Specifica-
tions under
load)
Power
consumption Voltage / Frequency
20 25 s 15 W 15-30 V AC, 50-60 Hz /
12-48 V DC 2)
100-240 V AC, 50-60 Hz /
100-350 V DC
35 40 s 45 W 15-30 V AC, 50-60 Hz /
12-48 V DC 2)
40 s 45 W 100-240 V AC, 50-60 Hz /
100-350 V DC
60 79 s 45 W 15-30 V AC, 50-60 Hz /
12-48 V DC 2)
100-240 V AC, 50-60 Hz /
100-350 V DC
100 119 45 W 15-30 V AC, 50-60 Hz /
12-48 V DC 2)
100-240 V AC, 50-60 Hz /
100-350 V DC
1) Other positioning times on request
2) The operating voltage must not drop below 11.5 V
We recommend an actuator designed with 1.5 times the
maximum torque of the fitting.
english
Type 3003

12
Technical Data
6.5.3. Electrical circuit diagrams
Symbol Description
FCO Limit switch ON
FCF Limit switch OFF
FC1 Additional limit switch 1
FC2 Additional limit switch 2
4 5 6 7 8 9
1
3
2
TP/PE
N
-
Ph
+
1
3
2
TP/PE
N
-
Ph
+
Open Close
Open Close
FC1
FC2
3-Point mode On-Off-Mode Feedback
Fig. 2: Open/Closed Version
If voltage is applied simultaneously to terminals 2 and 3, terminal 2 is the leading one and the actuator moves to the OPEN position.
NOTE!
Make certain in 3-point mode that the pulse duration of a controller lasts for at least 1 second. A pause time of at least 500 ms is required
before controller activation is repeated. Observe the duty cycle specified on the type label!
Please note the circuit board must remain power supplied to allow heating resistances working.
english
Type 3003

13
Technical Data
1
3
2
TP/PE
N
-
Ph
+
FC2
Feedback
1
3
2
12 3
17
17 18
18
13 14 15 16
B
A
A B
Motor
=
FCO
FCF
~
~+
-
FC1
10/30 W Board
P6 POSI
+ +- -
Output
signal
Input
signal
0-20 mA / 4-20 mA /0-10 V
TP/PE
The resolution of the control mode is 1°.
The input resistance for control 0-10 V is 10 kW.
The input resistance for control 0-20 mA / 4-20 mA is 100 W.
4 5 6 7 8 9
Fig. 3: Version with analog signal input
english
Type 3003

14
Installation
7. INSTALLATION
7.1. Safety information
DANGER!
Hazard due to electrical voltage!
Intervention in the device poses an acute risk of injury.
• Always switch off the power and secure it to prevent restarting
before removing the cover, or using the lever.
• Always connect multiple rotary actuators with phase isolation via
a switch!
• Protect electrical rotary actuators by using a mains-dependent
safety!
• Observe all applicable accident protection and safety guidelines
for electrical equipment!
WARNING!
Hazard due to improper installation!
Incorrect installation can result in personal injury and in damage to
the device and its surroundings.
• Installation may only be carried out by authorised technicians
using appropriate tools!
• Pay attention to the information in chapter „6. Technical Data“.
• Before installation, ensure that the manual lever can move freely.
WARNING!
Danger due to unintentional activation of the device!
Unintended actuation of the device during installation can lead to
injury and damage to property.
• Take appropriate measures to prevent the possibility of uninten-
tional activation of the device.
7.2. Power and control connections
Work steps:
→Disconnect the rotary actuator from the power supply.
→Remove the position indicator from the axis.
→Loosen the cover screws with a screwdriver and lift the cover off.
→Disconnect the cable connector ISO20 and insert the cable.
→Wire the connections according to the circuit diagram figures (see
„6.5.3. Electrical circuit diagrams“).
Use cables with a diameter of 7 ... 12 mm for the ISO20
cable fitting.
→Set the cover in place and screw it tight.
→Reinstall the position indicator.
english
Type 3003

15
Installation
7.3. Connecting the additional limit
switches (optional)
In the standard variant, the rotary actuator has 2 additional limit switches
(for 90º range of motion). Connect these as follows.
Work steps:
→Disconnect the rotary actuator from the power supply.
→Remove the position indicator from the axis.
→Use a screwdriver to loosen the cover screws.
→Lift the cover off.
→Wire the connections of the additional limit switches (FC1 and FC2)
according to the circuit diagram figures (see Fig. 2 and Fig. 3 ).
→Tighten the cable gland after connecting the terminals.
→Set the cover in place and screw it tight.
→Reinstall the position indicator.
Only use 4 or 6 conductor cable with a diameter of 7 ... 12
mm for the ISO20 cable fitting.
Ensure that the cable in the ISO20 cable fitting is com-
pletely sealed when tightening the union nut.
7.3.1. Setting the limit switches
The procedure for setting the limit switches is shown in Fig. 4 and
Fig. 5 .
Electronic card
Shaft
Motor
Housing
Wrench (00665296)
Cam No. 4
Additional limit
switch CLOSED
CLOSED
black
Cam No. 3
Additional limit
switch OPEN
OPEN
white
Cam No. 2
Motor limit switch
CLOSED
CLOSED
black
Cam No. 1
Motor limit switch
OPEN
OPEN
white
Fig. 4: Setting the limit switches. Limit switches max. 250 V / 5 A
english
Type 3003

16
Installation
Setting in
clockwise direction
or setting in
counter clockwise
direction
Cams
Wrench
Adjustment
direction
Fig. 5: Setting limit switches in counter clockwise and clockwise
directions
The rotary actuator is supplied with the following factory
settings:
• The CLOSED limit switches are activated with the cams 2
and 4 (closed position).
• The OPEN limit switches are preset at a 90° rotation
angle.
7.4. Circuit board for actuator with
standard signal input
A
D
F
E
B
G
C
M
I
K
L
HJ
N
Fig. 6: Circuit board
A Electrical power supply
24 V AC/DC
H K2 plug-in jumper
B Connection terminals of
the input signal
I K3 plug-in jumper
C Connection terminals of
the feedback
J Green and red LED
english
Type 3003

17
Installation
D MEM pushbutton K LED yellow: Indicates the
power supply
E CLOSE pushbutton L Potentiometer
F OPEN pushbutton M Motor connection
G K1 plug-in jumper N Heat resistor connection
To prevent electromagnetic interference, shielded cables
must be used.
Work steps:
→Loosen the cable gland and feed the cable through.
→Wire the signal transducer between terminals 15 and 16. Terminal
15 is the negative pole (-) and terminal 16 the positive pole (+).
→Wire the position feedback sensor between terminals 13 and 14.
Terminal 13 is the positive pole (+) and terminal 14 the negative
pole (-).
→Re-attach the cable gland.
If the connection voltage is 100 V to 240 V, a fuse must be
provided in the power supply.
7.4.1. Specify position of the plug-in
jumpers
ONOFF
Fig. 7: Plug-in
jumper K1
/ K2
Fig. 8: Plug-in
jumper
K3 OFF
Fig. 9: Plug-in
jumper
K3 ON
Signal
trans-
ducer
Feed-
back
Plug-in jumper
K1
Plug-in jumper
K2
Plug-in
jumper
K3
A B A B
0-10 V 0-10 V ON OFF ON OFF OFF
0-10 V 0-20 mA ON OFF OFF ON OFF
0-10 V 4-20 mA ON OFF OFF ON ON
0-20 mA 0-10 V OFF ON ON OFF OFF
0-20 mA 0-20 mA OFF ON OFF ON OFF
0-20 mA 4-20 mA OFF ON OFF ON ON
4-20 mA 0-10 V OFF ON ON OFF OFF
4-20 mA 0-20 mA OFF ON OFF ON OFF
4-20 mA 4-20 mA OFF ON OFF ON ON
english
Type 3003

18
Installation
7.4.2. Parameterization steps
Specify direction of rotation of the shut-off valve
Normal direction of rotation (preset)
G
→Press <OPEN> pushbutton and switch on
the card (hold down pushbutton).
The GREEN LED lights up.
→Release <OPEN> pushbutton and disconnect
the card from the power supply.
Reverse direction of rotation
R
→Press <CLOSE> pushbutton and switch on
the card (hold down pushbutton).
The RED LED lights up.
→Release <CLOSE> pushbutton and disconnect
the card from the power supply.
Specify control signal type
Control signal when voltage 0 – 10 V
R
→Press <MEM> pushbutton and switch on the
card (hold down pushbutton).
The RED LED lights up 3x.
→Release <MEM> pushbutton and disconnect
the card from the power supply.
Control signal when current 0 – 20 mA
R
→Press <MEM> and <OPEN> push-
button and switch on the card (hold
down pushbutton).
The RED LED lights up 3x.
→Release <MEM> and <OPEN> push-
button and disconnect the card from
the power supply.
Control signal when current 4 – 20 mA (preset)
R
→Press <MEM> and <CLOSE> push-
button and switch on the card (hold
down pushbutton).
The RED LED lights up 3x.
→Release <MEM> and <CLOSE>
pushbutton and disconnect the card
from the power supply.
english
Type 3003

19
Installation
Learning mode
Specify end positions
GR
→Press <OPEN> and <CLOSE>
pushbutton and switch on the card
(hold down pushbutton).
The RED and the GREEN LEDs light up.
→Release <OPEN> and <CLOSE>
pushbutton.
Both LEDs go out.
Learning mode is selected.
R
→Press <CLOSE> pushbutton to move
the shut-off valve into the closed
position.
The RED LED lights up.
R
→Press <MEM> and <CLOSE> push-
button to save the closed position.
The RED LED lights up 2x.
G
→Press <OPEN> pushbutton to move
the shut-off valve into the open
position.
The GREEN LED lights up.
G
→Press <MEM> and <OPEN> push-
button to save the open position.
The GREEN LED lights up 2x.
Specify end positions
All positions are now saved.
→Disconnect the card from the power
supply.
7.4.3. Normal operation
Display normal operation
G
→Switch on card.
The GREEN LED lights up 3x to indicate that the
start process has been implemented correctly.
GIn normal operation the GREEN LED lights up
when the rotary actuator opens the shut-off valve.
RThe RED LED lights up when the rotary actuator
closes the shut-off valve.
GRIf neither of the LEDs is lit, the actuator is not
actuated.
GR
The RED and the GREEN LEDs light up if the
torque is too high and the rotary actuator stops.
→Change direction of rotation of the rotary
actuator or switch over the voltage OPEN/
CLOSED to restart the rotary actuator!
english
Type 3003

20
Rotary actuators with integrated emergency reset
8. ROTARY ACTUATORS WITH
INTEGRATED EMERGENCY
RESET
8.1. Safety block for emergency
power version
Circuit board
Battery
Fig. 10: Safety block for emergency power version
8.2. Technical data
Voltage: 18 V DC
Currant nominal: 0.8 A
Max. current 2.4 A
Charging time 14 h max
Feedback relay for charge state 24 V DC - 1 A max
Permitted ambient temperature -10 °C - +40 °C
8.3. Electric wiring
65
66
17
18
17
18
Load state
feedback
Loaded battery: closed contact.
Safety block Pilot and power supply
card
2
13
N
-
Ph
+
Open
On-Off Mode
AB
Configuration A OR B
18 V DC Battery Block
F +
E -
E -
black wire
F +
red wire
Fig. 11: Electric wiring
Configuration A or B
A-standard mode: If the actuator is controlled with a programmable
controller, the feedback of the charge state can be connected to it.
B-mode - increased safety (if the feedback relay is used, terminals
65 and 66): The actuator does not actuate the valve unless the safety
block is loaded.
english
Type 3003