Burkert 8026 User manual

Quickstart
English Deutsch Français
Type 8026 - 8036 - SE36
Flowmeter and Flow transmitter
Durchfluss-Messgerät und Durchfluss-Transmitter
Débitmètre et transmetteur de débit

We reserve the right to make technical changes without notice.
Technische Änderungen vorbehalten.
Sous réserve de modifications techniques.
© Bürkert SAS, 2009 - 2018
Operating Instructions 1809/03_EU-ML 00567366 / Original_FR

3
8 ADJUSTMENT AND COMMISSIONING .........................................27
8.1 Safety instructions .......................................................................27
8.2 Knowing the Operating levels ..................................................27
8.3 Using the navigation button ......................................................28
8.4 Using the dynamic functions .....................................................30
8.5 Knowing the display ....................................................................30
8.6 Knowing the process level ........................................................32
8.7 Knowing the configuration level ...............................................34
9 MAINTENANCE AND TROUBLESHOOTING ...............................41
9.1 Safety instructions .......................................................................41
9.2 If you encounter problems .........................................................41
10 PACKAGING, TRANSPORT .................................................................. 41
11 STORAGE ......................................................................................................41
12 DISPOSAL OF THE DEVICE ................................................................ 42
1 ABOUT THE QUICKSTART .....................................................................4
1.1 Definition of the word "device" ................................................... 4
1.2 Validity of the quickstart ...............................................................4
1.3 Symbols used ................................................................................. 4
2 INTENDED USE .............................................................................................5
3 BASIC SAFETY INFORMATION ............................................................6
4 GENERAL INFORMATION ........................................................................7
4.1 Manufacturer's address and international contacts ............... 7
4.2 Warranty conditions ...................................................................... 7
4.3 Information on the Internet .......................................................... 7
5 DESCRIPTION OF THE RATING PLATE ............................................8
6 TECHNICAL DATA ........................................................................................9
6.1 Conditions of use .......................................................................... 9
6.2 Conformity to standards and directives ................................... 9
6.3 Dimensions of devices ................................................................. 9
6.4 Materials ........................................................................................10
6.5 Fluid data .......................................................................................12
6.6 Electrical data ...............................................................................14
7 INSTALLATION AND WIRING .............................................................. 16
7.1 Safety instructions .......................................................................16
7.2 Installation of a 8026 on a pipe ...............................................16
7.3 Installation of a 8036 on a pipe ...............................................18
7.4 Installation of a flow transmitter SE36 with sensor-fitting
S070 or S077 in a pipe .............................................................19
7.5 Wiring .............................................................................................21
Type 8026 - 8036 - SE36
Contents
English

4
About the Quickstart
Type 8026 - 8036 - SE36
1.2 Validity of the quickstart
This quickstart is valid for the following devices:
• Type 8026 flowmeter, from the version V2,
• Type 8036 flowmeter, from the version V2,
• Type SE36 flow transmitter, from the version V2.
These informations are available on the rating plate, see chap. 5.
1.3 Symbols used
Danger
Warns against an imminent danger.
▶Failure to observe this warning can result in death or in serious
injury.
Warning
Warns against a potentially dangerous situation.
▶Failure to observe this warning can result in serious injury or
even death.
Caution
Warns against a possible risk.
▶Failure to observe this warning can result in substantial or minor
injuries.
notiCe
Warns against material damage.
1 ABOUT THE QUICKSTART
This quickstart describes the entire life cycle of the device. Please
keep this quickstart in a safe place, accessible to all users and any
new owners.
This quickstart contains important safety information.
Failure to comply with these instructions can lead to hazardous
situations. Pay attention in particular to the chapters „Basic safety
information“ and „Intended use“.
▶Irrespective the version of the device, this quickstart must be
read and understood.
The quickstart explains how to install, adjust, and start-up the device.
A detailed description of the device can be found in the related
Operating Instructions available on the internet at: www.burkert.com
1.1 Definition of the word "device"
The word "device" used within this quickstart refers to:
• the Type 8026 flowmeter,
• the Type 8036 flowmeter,
• or the Type SE36 flow transmitter.
English

5
Intended use
Type 8026 - 8036 - SE36
Indicates additional information, advice or important
recommendations.
Refers to information contained in this quickstart or in other
documents.
▶Indicates an instruction to be carried out to avoid a danger, a
warning or a possible risk.
→Indicates a procedure to be carried out.
Indicates the result of a specific instruction.
2 INTENDED USE
Use of the device that does not comply with the instructions
could present risks to people, nearby installations and the
environment.
Type 8026 flowmeter, Type 8036 flowmeter and Type SE36
flow transmitter associated with a sensor-fitting are intended to
measure the flow rate of liquids.
▶Use this device in compliance with the characteristics and
commissioning and use conditions specified in the contractual
documents and in the Operating Instructions.
▶Never use this device for security applications.
▶Protect this device against electromagnetic interference, ultra-
violet rays and, when installed outdoors, the effects of climatic
conditions.
▶Use this device only if in perfect working order.
▶Requirements for the safe and proper operation of the device
are proper transport, storage and installation, as well as careful
operation and maintenance.
▶Only use the device as intended.
English

6
Basic safety information
Type 8026 - 8036 - SE36
3 BASIC SAFETY INFORMATION
This safety information does not take into account any contingencies
or occurrences that may arise during installation, use and mainte-
nance of the device.
The operating company is responsible for the respect of the local
safety regulations including staff safety.
Danger due to electrical voltage.
▶If a 12...36 V DC or a 14...36 V DC powered version is installed
either in a wet environment or outdoors, all the electrical volt-
ages must be of max. 35 V DC.
▶Disconnect the electrical power for all the conductors and iso-
late it before carrying out work on the system.
▶Observe all applicable accident protection and safety regula-
tions for electrical equipment.
Danger due to high pressure in the installation.
▶Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
Danger due to high temperatures of the fluid.
▶Use safety gloves to handle the device.
▶Stop the circulation of fluid and drain the pipe before loosening
the process connections.
Danger due to the nature of the fluid.
▶Respect the prevailing regulations on accident prevention and
safety relating to the use of dangerous fluids.
Various dangerous situations
To avoid injury take care:
▶not to use the device for the measurement of gas flow rates.
▶not to use the device in explosive atmospheres.
▶not to use the device in an environment incompatible with the
materials it is made of.
▶not to use fluid that is incompatible with the materials the device
is made of.
▶not to make any modifications to the device.
▶not to subject the device to mechanical loads.
▶to prevent any unintentional power supply switch-on.
▶to carry out the installation and maintenance work by qualified
and skilled staff with the appropriate tools.
▶to guarantee a defined or controlled restarting of the process,
after a power supply interruption.
▶to observe the general technical rules when installing and using
the device.
English

7
General information
Type 8026 - 8036 - SE36
notiCe
The device may be damaged by the fluid in contact with.
▶Systematically check the chemical compatibility of the com-
ponent materials of the device and the fluids likely to come
into contact with the materials (for example: alcohols, strong
or concentrated acids, aldehydes, alkaline compounds, esters,
aliphatic compounds, ketones, halogenated aromatics or hydro-
carbons, oxidants and chlorinated agents).
notiCe
Elements / Components sensitive to electrostatic discharges
▶This device contains electronic components that are sensitive
to electrostatic discharges. They may be damaged if they are
touched by an electrostatically charged person or object. In the
worst case scenario, these components are instantly destroyed
or go out of order as soon as they are activated.
▶To minimise or even avoid any damage due to an electro-
static discharge, take all the precautions described in the
EN 61340-5-1 norm.
▶Also make sure that you do not touch any of the live electrical
components.
4 GENERAL INFORMATION
4.1 Manufacturer's address and
international contacts
To contact the manufacturer of the device, use following address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Bürkert sales office.
The addresses of our international sales offices are available on the
internet at: www.burkert.com
4.2 Warranty conditions
The condition governing the legal warranty is the conforming use of
the device in observance of the operating conditions specified in the
Operating Instructions.
4.3 Information on the Internet
You can find the Operating Instructions and technical data sheets for
Type 8026, Type 8036 and Type SE36 at: www.burkert.com
English

8
Description of the rating plate
Type 8026 - 8036 - SE36
5 DESCRIPTION OF THE RATING PLATE
8026 Flow-Meter V2
Supply: 14-36VDC
Output: 1x4-20mA 2xTransistors 500 mA Max
Cell: HALL INSERTION SHORT
Process: Temp -15/100°C
PN 10 Bar
IP65-IP67 W41MT
S-N:2024
00560861
Made in France
1
2
3
4
5
6
7
8
9
10
11
12
1:V+
2:NPN/PNP1
3:0V
4:NPN/PNP2
Fig. 1: Rating plate of the Type 8026 flowmeter (example)
1. Type of the device, measured variable and version
2. Power supply
3. Output specifications
4. Type of sensor
5. Fluid temperature range
6. Fluid pressure
7. Allocation of the pins on the M12 fixed connectors
8. Manufacturing code
9. Article number
10. Serial number
11. Conformity marking
12. Protection rating
English

9
Technical data
Type 8026 - 8036 - SE36
6 TECHNICAL DATA
6.1 Conditions of use
Ambient temperature –10...+60 °C
Air humidity < 85%, non condensing
Protection rating
according to
IEC / EN 60529
IP65 and IP67 with connectors plugged
in and tightened and electronic module
cover fully sealed
Operating conditions Continuous
Mobility of the device Fixed
Use Indoor
Degree of pollution Degree 2 according to UL / EN 61010-1
Installation category Category I according to UL / EN 61010-1
Max. height above
sea level
2000 m
6.2 Conformity to standards and
directives
The applied standards, which verify conformity with the EU direc-
tives, can be found on the EU-type examination certificate and/or the
EU declaration of conformity (if applicable).
6.2.1 Conformity to the pressure equipment
directive
→Make sure the device materials are compatible with the fluid.
→Make sure the pipe DN and the nominal pressure PN are
adapted for the device.
Type 8026 flowmeter, Type S030, Type S070 and Type S077 fit-
tings conform to Article 4, Paragraph 1 of the Pressure Equipment
Directive 2014/68/EU under the following conditions:
• Device used on a piping (PS = maximum admissible pressure;
DN = nominal diameter of the pipe)
Type of fluid Conditions
Fluid group 1, Article 4, Paragraph 1.c.i DN≤25
Fluid group 2, Article 4, Paragraph 1.c.i DN≤32
or PSxDN≤1000
Fluid group 1, Article 4, Paragraph 1.c.ii DN≤25
or PSxDN≤2000
Fluid group 2, Article 4, Paragraph 1.c.ii
DN≤200
or PS≤10
or PSxDN≤5000
6.3 Dimensions of devices
→Please refer to the technical data sheets related to the device at:
www.burkert.com
English

10
Technical data
Type 8026 - 8036 - SE36
6.4 Materials
Part Material
Box / seals Stainless steel 1.4404,
PPS / EPDM
Cover / seal PC / Silicone
Display module PC / PBT
M12 fixed connector Nickel-plated brass
(stainless steel on request)
Fixed connector holder Stainless steel 1.4404 (316L)
Screws Stainless steel
Nut PC
Flow sensor holder / seal
(only 8026) PVDF / FKM (default)
Axis and shaft of the paddle
wheel (only 8026) Ceramic (Al2O3)
Paddle wheel (only 8026) PVDF
Quarter-turn system (only SE36) PC
PC
Silicone
PPS
EPDM
PVDF
PC
Stainless steel
Nickel-plated brass
(or stainless steel)
PPS
PVDF Ceramic (Al2O3)
FKM
Fig. 2: Materials used in the flowmeter 8026
• Materials of the flowmeter 8026 in contact with the fluid: PVDF,
ceramic, FKM (default).
English

11
Technical data
Type 8026 - 8036 - SE36
PC
Silicone
PPS
EPDM
Stainless steel
Nickel-plated brass
(or stainless steel)
PC
Fig. 3: Materials used in the flow transmitter SE36
10
9
8
7
6
5
4
3
2
1
0
-10 +10 +30 +50 +70 +90 +110
A
PVC (PN10)
PP (PN10)
T (°C)
P (bar)
PVC + PP
PVDF (PN10)
(PN10)
PVDF + Metal
Metal
A: Operating range
Fig. 4: Fluid temperature / fluid pressure dependency for flowmeter 8026
associated to a fitting S020
English

12
Technical data
Type 8026 - 8036 - SE36
6.5 Fluid data
Pipe diameter DN06 to DN400;
For fitting S020 or S030, the appropriate diameter is determined using the
flow rate / DN / fluid velocity graphs: refer to the Operating Instructions of the related fitting
Type of fitting • S020 for flowmeter 8026: see the Operating Instructions of the fitting
• S030 for flowmeter 8036: see the Operating Instructions of the fitting
• S070 or S077 for flow transmitter SE36: see the Operating Instructions of the fitting
Fluid temperature
• 8026 • –15...+100 °C;
Also factor in the fluid temperature / fluid pressure dependency for the 8026 with fitting
S020: see Fig. 4
• 8036 • see the Operating Instructions, delivered with the fitting S030
• SE36 with a fitting S070 or S077 • see the Operating Instructions, delivered with the fitting S070 or S077
Fluid pressure Also refer to the requirements of the Pressure Equipment Directive: see chap. 6.2.1
• 8026 • PN10;
Also factor in the fluid temperature / fluid pressure dependency for the 8026 with fitting
S020: see Fig. 4
• 8036 • see the Operating Instructions, delivered with the fitting S030
• SE36 with a fitting S070 or S077 • see the Operating Instructions, delivered with the fitting S070 or S077
Type of fluid
• 8026 and 8036 • Neutral or slightly aggressive fluids
• SE36 with fitting S070 or S077 • Viscous fluids, free of solid particles
Fluid viscosity
• 8026 and 8036 • 300 cSt max.
• SE36 with fitting S070 or S077 • see the Operating Instructions, delivered with the fitting S070 or S077
English

13
Technical data
Type 8026 - 8036 - SE36
Solid particle rate in the fluid
• 8026 and 8036 • ≤ 1 %
• SE36 with fitting S070 or S077 • 0 %
Flow rate measurement for 8026 and 8036
• Measurement range • 0.3...10 m/s
• Linearity • ±0.5 % of the full scale (10 m/s) 1)
• Repeatability • ±0.4 % of the measured value 1)
• Measurement deviation with standard K factor • ±2.5 % of the measured value 1)
• Measurement deviation with a Teach-in procedure • ±1 % of the measured value (at the value of the teach-in flow rate) 1)
Flow rate measurement for SE36 with fitting S070 or S077
• Measurement range
- viscosity > 5 mPa.s - S070: 2...1200 I/min
- S077: 2...1200 I/min
- viscosity < 5 mPa.s - S070: 3...616 I/min
- S077: 3...616 I/min
• Measurement deviation
- with standard K-factor of the
sensor-fitting
- S070: ±0.5 % of the measured value 1)
- S077: ±1 % of the measured value 1)
- with K-factor determined with a teach-in
procedure or with the specific K-factor,
engraved on the fitting
- S070: ±0.5 % of the measured value (at the value of the teach-in flow rate) 1)
- S077: ±0.5 % of the measured value (at the value of the teach-in flow rate) 1)
• Repeatability • ±0.03 % of the measured value 1)
1) Determined in the following reference conditions: fluid = water, water and ambiant temperatures = 20 °C, upstream and downstream dis-
tances respected, appropriate pipe dimensions.
English

14
Technical data
Type 8026 - 8036 - SE36
6.6 Electrical data
14...36 V DC power supply
version with 2 or 3 outputs (2 wires)
• Connection to main supply: permanent (through external SELV and through LPS
power supply)
• filtered and regulated
• oscillation rate: ±10 %
12...36 V DC power supply
version with 4 outputs (3 wires)
• Connection to main supply: permanent (through external SELV and through LPS
power supply)
• filtered and regulated
• oscillation rate: ±10 %
Specifications of the power source (not supplied)
of the UL devices
• Limited power source according to UL / EN 60950-1 standards
• or limited energy circuit according to UL / EN 61010-1, Paragraph 9.4
Current consumption
• version with 2 or 3 outputs (2 wires) • 25 mA max. (at 14 V DC)
• version with 4 outputs (3 wires) • 5 mA max. (at 12 V DC)
Current consumption, with loads on the transistors 1 A max.
Power consumption 40 W max.
Protection against polarity reversal yes
Protection against voltage spikes yes
Protection against short circuits yes, transistor outputs
English

15
Technical data
Type 8026 - 8036 - SE36
Transistor output
• Version with only 1 transistor output • NPN, open collector, 700 mA max., 1...36 V DC
• Version with 2 transistor outputs • NPN (/sink) or PNP (/source) (depending on parameter setting), open collector,
700 mA max., 500 mA max. per transistor if both transistor outputs are wired.
NPN output: 1...36 V DC
PNP output: supply voltage
Current output 4...20 mA, sink ("NPN sink") or source ("PNP source") (depending on parameter setting)
• Version with only 1 current output (2 wires) • max. loop impedance: 1100 W at 36 V DC, 610 W at 24 V DC, 180 W at 14 V DC
• version with 2 current outputs (3 wires) • max. loop impedance: 1100W at 36 V DC, 610 W at 24 V DC, 100 W at 12 V DC
English

16
Installation and wiring
Type 8026 - 8036 - SE36
7 INSTALLATION AND WIRING
7.1 Safety instructions
Danger
Risk of injury due to high pressure in the installation.
▶Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
Risk of injury due to electrical voltage.
▶Disconnect the electrical power for all the conductors and iso-
late it before carrying out work on the system.
▶Observe all applicable accident protection and safety regula-
tions for electrical equipment.
Risk of injury due to the nature of the fluid.
▶Respect the prevailing regulations on accident prevention and
safety relating to the use of dangerous fluids.
Warning
Risk of injury due to non-conforming installation.
▶The electrical and fluid installation can only be carried out by
qualified and skilled staff with the appropriate tools.
▶Install appropriate safety devices (correctly rated fuse and/or
circuit-breaker).
▶Respect the assembly instructions for the fitting used.
Warning
Risk of injury due to unintentional switch on of power supply
or uncontrolled restarting of the installation.
▶Take appropriate measures to avoid unintentional activation of
the installation.
▶Guarantee a defined or controlled restarting of the process after
any intervention on the device.
notiCe
The tightness of the device is not guaranteed when the cover
is removed.
▶Prevent the projection of liquid inside the housing.
The device may be damaged if a metal component comes
into contact with the electronics.
▶Prevent contact of the electronics with a metal component.
7.2 Installation of a 8026 on a pipe
Danger
Risk of injury due to high pressure in the installation.
▶Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
Risk of injury due to the nature of the fluid.
▶Respect the prevailing regulations on accident prevention and
safety relating to the use of dangerous fluids.
English

17
Installation and wiring
Type 8026 - 8036 - SE36
Follow the next steps to install the flowmeter 8026 properly:
7.2.1 Install the fitting S020 in the pipe
→Select a fitting S020 adapted to the fluid velocity.
To select a fitting, please refer to the chart in the technical
data sheet of the related fitting.
Choose a place for the fitting on the pipe so that:
- air bubbles do not appear in the pipe, in the section around the
sensor (Fig. 5).
- the pipe is always filled in the section around the sensor
(Fig. 5).
Correct
Correct
Incorrect
Incorrect
flow direction
Correct Incorrect
Fig. 5: Air bubbles within the pipe / Filling of the pipe
Caution
Risk of damage when installing the fitting.
▶Respect the installation instructions given in the Operating
Instructions of the fitting.
→Install the fitting S020 in the pipe so that the paddle wheel axis
of the device is horizontal (Fig. 6).
Fig. 6: The paddle wheel axis must be horizontal
English

18
Installation and wiring
Type 8026 - 8036 - SE36
7.2.2 Install the flowmeter 8026 into the
fitting S020
A
B
→Check that there is a seal on the device
and that it is not damaged.
Replace the seal if necessary.
→Place nut A on the fitting and insert
circlip B into the groove.
→Carefully insert the device into the
fitting.
If assembly is correct, the device can
no longer rotate on itself.
→Secure the unit with nut A, tightening
only by hand.
Fig. 7: Installation of flowmeter 8026 into the fitting S020
7.2.3 Complete the installation of the 8026
→Wire the device (see chap. 7.5) and supply power to the device.
→Set the K-factor or determine it through a Teach-In procedure
(see chap. 8.7.8).
7.3 Installation of a 8036 on a pipe
Danger
Risk of injury due to high pressure in the installation.
▶Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
Risk of injury due to the nature of the fluid.
▶Respect the prevailing regulations on accident prevention and
safety relating to the use of dangerous fluids.
Follow the next steps to install the flowmeter 8036 properly:
7.3.1 Install the sensor-fitting S030 in the
pipe
→Select a sensor-fitting S030 adapted with the fluid velocity.
To select a fitting, please refer to the chart in the technical
data sheet of the related fitting.
Choose a place for the sensor-fitting S030 on the pipe so that:
- air bubbles do not appear in the pipe, in the section around the
sensor (Fig. 5, chap. 7.2.1).
- the pipe is always filled in the section around the sensor (Fig. 5,
chap. 7.2.1).
English

19
Type 8026 - 8036 - SE36
Installation and wiring
Caution
Risk of damage when installing the fitting.
▶Respect the installation instructions given in the Operating
Instructions of the fitting.
→Install the sensor-fitting S030 in the pipe so that the paddle
wheel axis is horizontal (Fig. 6, chap. 7.2.1)
7.3.2 Assemble the flow transmitter SE36 on
the sensor-fitting S030
SE36
S030
1
2
3
→1: Insert the flow transmitter
SE36 in the sensor holder.
→2: Turn the flow transmitter SE36
by a quarter turn.
→3: Secure the flow transmitter
SE36 and the sensor-fitting
S030 by tightening the screw to
a max. torque of 1 N·m.
Fig. 8: Assembling the flowmeter 8036
7.3.3 Complete the installation of the 8036
→Wire the device (see chap. 7.5) and supply power to the device.
→Set the K-factor or determine it through a Teach-In procedure
(see chap. 8.7.8).
7.4 Installation of a flow transmitter
SE36 with sensor-fitting S070 or
S077 in a pipe
Danger
Risk of injury due to high pressure in the installation.
▶Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
Risk of injury due to the nature of the fluid.
▶Respect the prevailing regulations on accident prevention and
safety relating to the use of dangerous fluids.
Follow the next steps to install the flow transmitter SE36 properly on
the sensor-fitting S070 or S077, mounted in the pipe:
7.4.1 Install the sensor-fitting S070 or S077
in a pipe
→Select a sensor-fitting S070 or S077 adapted to the fluid
viscosity.
English

20
Installation and wiring
Type 8026 - 8036 - SE36
To select a fitting, please refer to the chart in the technical
data sheet of the related fitting.
→Install the sensor-fitting S070 or S077 in the pipe so that the
oval gear axes are in the horizontal plane (see Fig. 9).
Correct
Incorrect
Fig. 9: The oval gear axes must be horizontal (seen from the front)The
oval gear axes must be horizontal
7.4.2 Assemble the flow transmitter SE36 on
the sensor-fitting S070 or S077
1
23
SE36
S077
S070
→1: Insert the flow transmitter
SE36in the sensor holder.
→2: Turn the flow transmitter
SE36 by a quarter turn.
→3: Secure the flow transmitter
SE36 and the sensor-fitting
S070 or S077 by tightening
the 2 screws to a max. torque
of 1 N·m.
Fig. 10: Assembling the flow transmitter SE36 with the sensor-fitting S070
or S077
English