Burtonsafes BURTON DUO DEAD - BOLT User manual

          












 s 








 K  O]  L  D





BS-Inst-023
Oct - 16

    
•Press and hold Key [1] until double beep. The light
remains on during the following actions.
•Enter main code.
•Enter Secondary code twice (Double signal after each)
• • •
t   

�- 
  ·

=©
j =Q


=©
j =Q
(The secondary code can be changed like the main
code. Starting by pressing 1 instead of z ero With the
main code, the secondary code can be deleted. The
main code cannot be deleted.)
•Press and hold Key [3] until double beep. (The LED remains on throughout the following action).
•Enter main code.
• The secondary code is now deleted.  II=©
 11
 










 I 

 

 11
 11
=
 
To change the loc k bac k to no time delay - in the opening window ( after the time delay has counted down and the beeps occur ) hold the 9
until double beep and light stays on - enter the valid main code - and enter 00 01 and 00 01 again to comfirm .
This will now set the loc k bac k to default time settings

A series of beeps indicates that the battery is weak and must be replaced. Only use 9V ALKALINE - batteries!
Burton Safes recommends...........
O 
BS-Inst-023
Oct - 16