Burtonsafes KS User manual

9
USER INSTRUCTIONS - KS CABINET LOCK
How to open the safe for the first time
ABOUT THE LOCK
This lock requires a 3-8 digit code to open
the lock. You are provided with an emergency
overrride key for this safe - do not keep the keys
inside the safe.
• Open your safe with the emergency key, follow the steps under
‘How to open your safe with the emergency key’
• Once open, open the battery cover on the inside of the door
• Insert 4x AA batteries
• Keep the safe door open
How to program a code
• Open the safe door
• Press the reset button (This button is located on the inside of the safe
door by the hinges)
• Enter a 3-8 digit code followed by the [A] key
• Test your code with the safe door open
How to close the safe
• Ensure that the bolts are fully retracted (if necessary rotate the handle
to retract the bolts)
• Gently push the door shut. Always ensure that there are no objects or
people in the way of the closing door
• Turn the handle until the stop position is reached
Page 1 of 2
V.1
25/10/2018

How to open the safe
• Enter your 3-8 digit code followed by the [B] key
• Rotate the handle until the bolts are fully retracted
• Open the safe door
Incorrect Entry
• After 3 incorrect entries a warning beep will sound for 20 seconds.
During this time no other code entries can be made
• When the beeps have stopped, try again
How to open the safe with the emergency key
• Remove the emergency key cover on the front of the key pad
• Insert the emergency key into the lock. The key will only fit into the
lock in 1 position. Do not force the key
• Turn the key clockwise then rotate the handle until the bolts are fully
retracted
• Open the safe door
Current supply / Battery change
• This safe requiries 4x AA batteries to operate
• The battery compartment is located on the inside of the safe door
• Burton Safes recommends Duracell
Page 2 of 2
V.1
25/10/2018