Campania FT-333 User manual

FT
-
33
3
MC
-
3
Fountain
Two people are recommended for the installation ofthisfountain!
Revised
November 5, 2018
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK140 pump (1)
#10 stopper(1)
#7 Drain stopper(1)
Approx.8”length of1/2”blacknon-kinktubing (1)**
2”length of5/8”clearvinyltubing (1)**
Hose clamps(1)*
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately20 gallonsof water.
Thisfountain usesalargefountain cover.
(FTNCOV-LG)
Compatible withRefill #7 Device and LEDKits
(A different style stopper mayberequestedfor thispart.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF140 - 140GPH Pump
6FTcord length

FT
-
33
3
MC
-
3
Fountain
Two people are recommended for the installation ofthisfountain!
Revised
November 5, 2018
Assembleyourfountain onalevelsurface capableofholdingaminimumof575poundswith
anapproximate3.5square footfootprint.
FT-333A(545 lbs)
37”Lx17.75”Wx39.25”H
FT-331B(15 lbs)
8.5”Lx6”Wx6”H
FT-333CPP Copper Plate
(forFT-331/CP)
FT-333CSP Corten SteelPlate
(forFT-331/CS)
1. Position thebasin(FT-333A)wherethefountain
istobeinstalled, ensuring that it islevel.
2. Assemble thepumpand tubing
a. NOTE:Besuretousetheappropriate
sizeadapter provided withthe pump
b. Using ahoseclamp, attachthe1/2”non-
kink tubingtothepumpoutlet.
c. Place thestopper around thepumpcord
approximately6inchesfromthepump.
3. Feedthepumpcordthrough thelarger hole in
thebackofthebasin(FT-333A).
4. FIRMLYpressthestopper intothehole evenly.
a. Note: Using thehandle ofascrewdriver or
hammerworksbesttopress thestopper in
place.
5. Fit theclear end ofthetubing assemblyover the
CPVCpipeprotruding at thebottomofthebasin.
6. Place thepumpcover (FT-331B) over thepump.
7. Fill thefountainwithwater.
8. Thecopper or steelface plateswillbeinstalled
and sealedinplacebeforeshipping.