camry EB9-6 series User manual

Kg/lb
05EB-006E Ro
To convert weight unit
If your scale is with both measuring system
of Metric (kilograms) and Imperial (pounds),
you can pull up and down the unit switch at
the back of scale to convert scale unit
between kg-lb.
ADVISE FOR USE & CARE
1. The platform will be slippery when it is wet. Keep it dry!
2. Keep standing still during the course of weighing.
3. DO NOT strike, shock or drop the scale.
4. Treat the scale with care as it is a precise instrument.
5. Clean the scale with a damp cloth and avoid water getting inside the
scale. DO NOT use chemical/abrasive cleaning agents.
6. Keep the scale in cool place with dry air.
7. Always keep your scale in horizontal position.
8. If failed to turn on the scale, check whether battery is installed, or
battery power is low. Insert or replace new battery.
9. If there is error on display or can not turn off the scale for a long time,
please take off the battery for about 3 seconds, then install it again to
re move soft-fault. If you can not resolve the problem, please contact
your dealer for consultation.
10. Do not use it for commercial purpose.
Unit switch

CR2032
Auto on/Auto off
Store last weight reading and compare current reading to similar record
LCD with blue backlight (for EB9008H only)
Two weight unit systems: kg/lb convertible
Max. capacity=180kg/400lb, Division=0.1kg/0.2lb
Low battery/overload indication
FEATURES
Power
1X3V lithium battery (CR2032).
Please remove isolation foil from
battery contact before use.
2X1.5V AAA batteries (not included)
for EB9008H
M
Lb
LCD icons illustration:
Up icon
Memory
Down icon
Value
Weight unit
Overload indication
Scale overloaded (max. capacity is indicated
on the scale). Please step off to avoid damage
to the scale.
Low battery indication
Low battery power. Please replace new battery.
Step 1: Place the scale on a flat and solid
surface. Avoid carpet or soft surface.
To operate
kg
kg
Step 2: Step onto the scale gently (auto-on)
and wait a moment until LCD shows your weight.
To store weight reading
M
Power off Step onto
scale gently
Show current
weight reading Store the reading into memory Auto off
The scale will store weight reading into memory automatically. The scale can store
80 records in maximum.
To Compare current reading to the most similar record
The scale can automatically search the most similar weight record in memory and
compare current weight reading to the most similar record. But if you do not step off,
or the difference between current weight and the searched record is more than 5kg,
the scale will not make comparison.
Weighing error appears if LCD shows "C". Please step onto
the scale and test again.
Re-test
Step onto scale again
Show weight reading
Re-test icon
To replace battery
Open battery case cover at the back of scale
and replace battery as follow:
Type A: Bend the small black tab outwards and
the battery will come out. Take note not to bend
the contact.
Type B: Take out used batteries, with the aid of
a sharp object if needed.
Install new batteries by putting one side of the
battery down first and press down the other side.
(Please take note to the polarity)
Black tab Contact
Show 3 times alternatively
Store current
reading
into memory
M
Power off
Step onto
scale gently
Show current
weight reading
Compare current
reading to the most
similar record