camry ek6550h User manual

CLEANING AND CARE
MEASURING
CUP SCALES
2. All plastic parts should be cleaned immediately after contact with fats, spices, vinegar and strongly flavored/colored foods.
Avoid contact with acids citrus juices.
3. Always use the scale on a hard, flat surface. DO NOT use on carpet.
.
.
.
.
.
1.Clean the product with a soft, slightly damp (not wet) cloth. Remove container to clean up. Ensure container is empty before
removing; Do not put scale into water. The scale is not water-proof.
4 DO NOT strike, shake or drop the scale.
5 The scale is precise instrument. Please treat with care.
6 Put the scale in cool and dry place.
7 If fail to switch on the scale, check whether battery is installed, or battery power is low.
8 For family use only. DO NOT use for commercial purpose.
Auto shut-off occurs if display shows
'0' or shows the same weight reading
for 30 seconds.
AUTO SHUT OFF
To maximize battery life, please press
button for 3 seconds to turn off
scale after use.
MANUAL SHUT OFF
1.
2.
WARNING INDICATORS
1. Replace new battery.
2. Scale overload. Remove item to avoid
damage.Max.weight capacity is
indicated on the scale.

1 2
Oil Flour Milk
Water
1.Measuring cup fuction
2.Indicate volume of water,milk,oil and flour
3.Two weight unit systems g lb:oz convertible
4.Convertible volume unit: ml,fl'oz and cup
5.Tare,Zero function
6.Low battery power/Overload indication
7.Auto off
FEATURES
LCD
FUNCTION BUTTON
Mode conversion Unit conversion
Volume unit( )fl'oz
Tare function
Weight unit(lb:oz)
Mode selector
(Arrow keys)
Weight unit(g)
Volume unit(ml)
TO INSTALL OR REPLACE BATTERY
A. Take out the used batteries (with the aid of a
sharp object, if needed)
B. Install new battery by putting one side of the
battery and then pressing down the other side.
Please take note to the polarity.
2x1.5V AAAbatteries (not included)
Measuring cup
Body Button
TO INSTALL CUP
1.Totake out
Thumbs withhold slidingclosure
to make thetapered ned detach
from plate,take out the measuring
cup with theother hand.
2.Toinstall
Make the plate to align the tapered
ned position,and pressthe measuring
cup,loosen your handafter hearing
"clack" ,just checkit whether the cup
is locked.
Sliding closure
Taperedned
Plate

43
Oil Flour Milk
Water Oil
Flour Milk
Water
Oil Flour Milk
Water Oil
Flour Milk
Water
UNIT CONVERSION BUTTON
If the item tobe weighted is inMetric system (kilogram/gram) andImperial system (pounds/ounces ).
1. Weight unitconversion:
Toswitch between Metric systemand system, press the UNITbutton while in weighingmode.Imperial
2.Volume unitconversion
Press UNIT toswitch between ml(fl' oz)and CUP undervolume mode. For instance,underwater mode:
Remark: The unit system of scale depends on sales destination or the requirement of distributor.
Oil Flour Milk
Water
Oil Flour Milk
Water Oil
Flour Milk
Water
TO MEASURE
1. Weighing mode
A. Place the scale on a solid and flat
surface.
B. Place bowl (if used) on the scale
before turning on the scale.
C. Press to enter weighing
mode.
D.
E. Load weighing object on to start
weighing,LCD will show the weight
reading.
Wait until “0” display on LCD.
Place items
Oil Flour Milk
Water
Oil Flour Milk
Water
Oil Flour Milk
Water
Oil Flour Milk
Water
Oil Flour Milk
Water
MODE CONVERSION
The product willbe in weighing mode after turning on. Please press MODE
to switch mode(weighig, water volume, milk volume, cooking oil volume
and flour). Thenpress UNIT to select the unit that you need.
Water mode Milk volume mode Oil volume mode Flour volume mode
Weighting mode

65
Oil Flour Milk
Water Oil
Flour Milk
Water Oil
Flour Milk
Water Oil
Flour Milk
Water
"ZERO" OR "TARE" FUNCTION
To weigh different loads consecutively without removing loads from the scale.
Put first Load on the scale, get weight reading. Press button to reset the
LCD reading to "0" before adding next load. You can repeat this operation.
LCD will show “-----” or “0g” each time
is pressed. “-----” means processing, please
wait for a moment. When “0g” and icon “T”
on lower left corner of LCD show up together,
it means “TARE” function is active.Max. Weight
capacity is reduced by total weight of all loads.
LCD display will show dash “---“ or “0g”
each time is pressed. Please wait
when “---“ shows, it means processing.
“0g” will display when weights have been
zeroed out, Maximum weight capacity
remains unchanged.
Oil Flour Milk
Water
Oil Flour Milk
Water Oil
Flour Milk
Water Oil
Flour Milk
Water Oil
Flour Milk
Water
2. Volume mode
A.Place the container.Place thescale
ona solid and flat surface.
B. Press to turnon the scale.
For instance, measur milk with
CUP unit, step as follow:
e
C. Wait until “0” displayon LCD,
press MODE buttonto select
“milk” mode.
D.Press UNIT button to set CUP
unit.
E. LCD willdisplay the volume
of the liquidin the container.
Pour milk