Canon Grand Piano User manual

Assembly Instructions
1: Carefully cut out the parts.
2: Make mountain folds and valley folds along
the dotted lines, as indicated by the directions.
3: Assemble the parts in the order shown by the
numbers on the glue tabs.
(Read the assembly instruction for more information.)
4: Attach the parts in order.
(Read the assembly instruction for more information.)
5:Your Paper craft model is finished.
What you need
Scissors, tweezers, glue (We recommend craft glue.)
Glue stick (used to attach wide surfaces together.)
Thread (size 20) (Used to string the piano.)
Instant adhesive (Recommended to attach the thread.)
Caution
Keep glue away from small children.
Be careful not to cut your fingers when using scissors.
Fold the folding lines before gluing.
Scissors line
Valley fold
Mountain fold
Cut in line
Cut out
Glue spot
You can give the piano a more "genuine" appearance if you
paint the surface after cutting out the black and yellow parts.
Handy Hint
Notation Key
This model was designed for Papercraft and may differ from the original in some respects.
Black and yellow paint has been added to the finished piece in the photo.
When assembling the parts, be sure to carefully read the "Assembly
Instructions" along with the parts sheet.
Grand piano
[Assembly Instructions] : Eleven A4 sheets
Front lid
Back lid
Music desk
Lock rail
Fallboard
Lockbar
Bridge
Strings
Frame
Lid prop
Heel
Backbottom
Leg
Sound board
Caster
Leg plate
Console
Pedals
Pedal plate
Braces Backbottom
Leg
Canon Inc.
http://www.canon.com/c-park/
PAGE 01
Grand piano : Assembly Instructions
Hiroshi Chiba / PAPERART-C

AMaking the grand piano's body.
Attach the parts as shown here.
Attach the parts as shown here.
Attach the parts as shown here.
Attach the parts as shown here.
Interlock a and a together.
Attach the parts as shown here.
Attach the parts as shown here.
Interlock b and b together.
As shown here, attach the back sides
together.
Cut out.
Cut the part to the correct size, and attach.
Canon Inc.
http://www.canon.com/c-park/
PAGE 02
Grand piano : Assembly Instructions
Hiroshi Chiba / PAPERART-C

Assemble the parts as shown here.
Assemble the parts as shown here.
Assemble the parts as shown here.
Assemble the parts as shown here.
Attach the respective parts as shown here.
Attach the parts as shown here.
Canon Inc.
http://www.canon.com/c-park/
PAGE 03
Grand piano : Assembly Instructions
Attach the reinforcing beams as shown
here.
Hiroshi Chiba / PAPERART-C

Attach the parts as shown here.
Attach the reinforcing beams as shown
here.
Attach the parts as shown here.
Roll up and attach.
Curve part 41 as shown here.
Attach the parts as shown here.
Attach 31 and 32, and make the
reinforcing beams.
After gluing 28 and 29 together, attach the
reinforcing beams as shown.
Attach the parts as shown
here.
Curve.
Curve.
Canon Inc.
http://www.canon.com/c-park/
PAGE 04
Grand piano : Assembly Instructions
BMaking the fallboard.
Hiroshi Chiba / PAPERART-C

CMaking the backbottom and keys.
Attach the reinforcing beams as
shown here.
Attach the parts as shown here.
Attach the reinforcing beam 46 to back
side of 45 as shown here.
Attach.
Cut out the black keys
one at a time and attach
them.
* This step can be omitted.
Attach the parts as shown
here.
Canon Inc.
http://www.canon.com/c-park/
PAGE 05
Grand piano : Assembly Instructions
A figure of completion of the
fallboard.
Fallboard(face)
Fallboard(back)
Hiroshi Chiba / PAPERART-C

Attach 62 to the parts
made in 36.
EMaking the console and legs.
DPut the parts together to assemble the body.
Assemble the parts as shown here.
Assemble the parts as
shown here.
Assemble the parts as shown here.
Assemble the parts as shown here.
Assemble the parts as
shown here.
Slot the fallboard in without
applying glue.
Assemble the parts as
shown here.
Assemble the parts
as shown here.
Attach the
reinforcing beams.
Assemble the parts as shown here.
Attach the reinforcing beams
to the parts made in 37.
Glue parts.
* Make three of these.
* Make three of these.
Attach the parts as shown here.
Assemble the parts as shown here.
* Make three
of these.
Canon Inc.
http://www.canon.com/c-park/
PAGE 06
Grand piano : Assembly Instructions
Hiroshi Chiba / PAPERART-C

Attach the parts 82, 83. Attach the parts 84, 85.
Attach the parts.
Attach the reinforcing beams 73 to back side
of 72 as shown here, and assemble the
parts.
Assemble the parts as shown here.
Attach the reinforcing beams 75, 76 to back
side of 74 as shown here, and assemble the
parts.
Assemble the parts as shown here.
Assemble the parts as shown here.
Assemble the parts as shown here.
View from above.
View from underneath.
Make three of these. Make two of these.
Assemble the parts as shown here.
Attach the back
sides together.
Canon Inc.
http://www.canon.com/c-park/
PAGE 07
Grand piano : Assembly Instructions
FMaking the pedals.
Hiroshi Chiba / PAPERART-C