Canon Paper Craft Snowy owl (Female) User manual

The snowy owl is covered in snow-white feathers.
This large species of owl is mainly found in Arctic
tundra areas. The snowy owl can rotate its head up
to 270 degrees giving it an extremely wide range
of vision.While the male is almost purely white, the
female's feathers are streaked with shades of black
or brown. The female is also bigger than the male
meaning that, unlike other owls, the snowy owl's
sex can be easily distinguished. Unlike most other
owls, the snowy owl is active during daylight hours.
Summer in the Arctic circle features nights of
"midnight sun" , and the snowy owl, living in open
areas such as tundras, grasslands, wetlands, or
rocky areas, must hunt for prey from an elevated
point with maximum vision of the area. For this
reason, snowy owls are often very active during the
day, even though hunting is commonly done in the
mornings or evening. Their prey consists mostly of
small rodents, but they occasionally feed on other
birds too.
This papercraft is about one half the size of a real
snowy owl.
Scissors line
Glue spot
Valley fold
Mountain fold
Cut in line
Glue up to this line
Glue reverse side
Notation KeyAssembly Instructions
Tools
Caution
1)Carefully cut out theparts.
2)Make mountain folds and valley folds alongthe dottedlines,
as indicated by thedirections.
3)Assemble the parts inthe order shownby the numbers on the gluetabs.
(Read theassembly instructionfor more information.)
4)Attachthe partsin order.
(Read theassembly instructionfor more information.)
5)Your Paper craftmodel is finished.
Scissors, glue (We recommend craft glue.), rubber band
Glue, scissors and other tools may be dangerous to young children
so be sure to keep them out of the reach of young children.
Snowy owl
(Bubo scandiacus)
Snowy owl (Female) : Assembly Instructions

Assemble the head
Assemble .
1
Make this area concave.
Assemble and ,and attach them to the head, starting with .
2 3 2
Attach to first.
1
Assemble the parts to look like this.
Assemble , and attach them to the head.
4
Completed head
Snowy owl (Female) : Assembly Instructions

Assembling the body's internal frame
Last, thread a rubber band through
part as shown, and attach.
12
7
8
9
12
8
9
7
The shape of is very complicated, so take extra care
when assembling it, following the assembly order
shown in the above diagram.
11
Assemble , and attach it to the internal frame.
11
Make the internal frame of the body.
11
Completed internal frame
Snowy owl (Female) : Assembly Instructions

Assemble the body's wings and legs
Assemble , , and , and attach them to the body.
10 13 14 17
Fold in half and glue together before cutting out.
Body feathers and upper
part of the legs complete.
Back
Glue the tail feathers to the internal frame, and glue to .
Assemble and , and attach them to the internal frame.
20
15 16
Front
Snowy owl (Female) : Assembly Instructions

Assemble the body and flanks
Assemble and , glue them together and attach them to the body.
18 19
Assemble , glue to the center of the body.
21
Completed the body and flanks
Snowy owl (Female) : Assembly Instructions

Assemble the breast and wings
Glue to
33
Completed the body
22 33
Assemble , glue it together to , and attach them to the body.
Glue and together, and assemble them, and attach them to the body.
23 24
Snowy owl (Female) : Assembly Instructions

Assemble legs
*Securing the talons facing slightly downwards
as shown in the completed view, will make
the owl easier to place on the stand.
Make round.
Front
Back talons
Front talons
Completed the legs
Assemble and .
Assemble and , and glue to make the front talons.
Assemble and , and glue to make the back talons.
Insert , , , and into / , secure them with glue and the legs are complete.
25
27 31
28
27 28 31 32 25 26
32 30
29
26
Snowy owl (Female) : Assembly Instructions

Fold the stand into a triangular
prism shape and attach parts
and to stabilize it.
Set up the snowy owl by
perching it on the stand. The
owl's head can be turned to
face different directions as
you please.
Glue the legs and head to the body
Use to attach the head to the body, and insert the legs into the body.
12
Complete!
12
34
6
5
12
Snowy owl (Female) : Assembly Instructions