Canvas 088-2289-4 User manual

ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
SYDNEY DOUBLE
EGG SWING
PRODUCT NO. 088-2289-4

We believe in the power of décor and its
ability to make up the fabric of your home.
That’s why CANVAS®collections draw
inspiration from Canadians and the way
they live.
From on-trend furniture pieces to holiday
décor and all your outdoor living essentials,
CANVAS®makes it easy to refresh your space
to reflect your unique style and the way you
live every day.
We would love to hear from you and welcome
your thoughtful feedback. Visit our website
at canadiantire.ca to tell us about your
experience, and share your photos with us
using #mycanvasstyle.
Show us how you bringCANVAS®products
to life. We can’t wait to see!

Parts List 4
Step-by-step Guide 8
Warranty 13
TABLE OF CONTENTS
TOOLS REQUIRED
•Maximum Weight: 225 lb (102 kg) per seat
•Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
•Any assembly or maintenance of the product must be carried out by adults only.
•Some parts may contain sharp edges. Wear protective gloves if necessary.
•To prevent damage, place all parts on a level surface during assembly. Add a layer
of protective surface if needed.
•Due to the nature of steel, surface oxidation (rusting) will occur if this protective
coating is scratched. This is a natural process. To minimize this condition, it is
recommended that care be taken when assembling and handling the product in
order to prevent the paint from being scratched.
• For easy assembly, do not completely tighten bolts into the frame until all bolts
have been inserted for that phase of assembly. Only at the final step of assembly,
securely tighten all bolts and hardware.
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND USING THE PRODUCT.
2 people

SYDNEY DOUBLE EGG SWING4
PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
1Base 1
5Seat Frame 1
3Upper Hanging Bar 2
7Safety Rope 1
2Lower Hanging Bar 2
6Cushion 1
4Back Frame 1
8Hook 2

SYDNEY DOUBLE EGG SWING 5
EXPLODED PARTS
6
7
5
4
L
L
3
L
MM
2 2
1
3
L
8
8

SYDNEY DOUBLE EGG SWING6
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
FM6 Nut 4
JM6 Screw Cover 4
HM8 Spring washer 12
LPlastic Muffler 4
GM8 Washer 16
KM8 Screw Cover 4
IM8 Nut 12
MPost Plastic Part 2
AM8x55 Bolt 4
CM8x15 Bolt 4
EM6 Washer 4
B8
D4
M8x30 Combination
Bolt and Washer
M6x45 Combination
Bolt and Washer

SYDNEY DOUBLE EGG SWING 7
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
NHex Key 1
OWrench 1

SYDNEY DOUBLE EGG SWING8
STEP-BY-STEP GUIDE
STEP 1
1. Attach the lower hanging bar (2) to the base (1) by
lining up the bolt holes on the lower hanging bar (2) with
the corresponding bolt holes on the base (1).
2. Using M8x30 combination bolt and washer (B), M8
washer (G), M8 spring washer (H) and M8 nut (I), lightly
tighten all bolts using the hex key (N) and wrench (O).
3. Using M8x15 bolt (C), M8 spring washer (H), M8 washer
(G), lightly tighten all bolts using the hex key (N).
4. Tighten all bolts.
2
H
C
X2
X12
X4
1
G
B
I N
O
X1
X12
X8
X8 X1
X1
2
2
G
G
HI
H
C
B
1

SYDNEY DOUBLE EGG SWING 9
NOTE:
Do not completely tighten.
K
K
LL
I
I
A
3
2 2
3
G
G
A
STEP 2
1. Connect the upper hanging bar (3) and lower hanging
bar (2) by using post plastic part (M).
2. Using M8x55 bolt (A), M8 washer (G) and M8 nut (I),
tighten all bolts using the hex key (N) and wrench (O)Add
M8 screw cover (K) as shown below.
3. Attach the plastic muffler (L) to the hook of upper hang
bar (3).
3
K
X2
X4
IX4
G
M
O
X4
X2
X1
A
L
N
X4
2X2
X2
X1
M
M

SYDNEY DOUBLE EGG SWING10
NOTE:
Do not completely tighten.
STEP 3
1. Insert the back frame (4) to the seat frame (5). Lining
up the bolt holes on the back frame (4) with the
corresponding bolt holes on the seat frame (5)
2. Using M6x45 combination bolt with washer (D), M6
washer (E) and M6 nut (F), lightly tighten all bolts using
the hex key (N) and the wrench (O).
3. Tighten all bolts, then add M6 screw cover (J) as shown
below.
4. Attach the plastic muffler (L) to the hook of back frame
(4).
5
J
E
X1
X4
X4
4
F
D
L
X1
X4
X4
X2 N
O
X1
X1
F
E
D
J
L
L
5
5
4
4