Canvas MORAINE 088-0542-2 User manual

ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
MORAINE SECTIONAL SET
PRODUCT NO. 088-0542-2

We believe in the power of décor and its
ability to make up the fabric of your home.
That’s why CANVAS® collections draw
inspiration from Canadians and the way
they live.
From on-trend furniture pieces to holiday
décor and all your outdoor living essentials,
CANVAS® makes it easy to refresh your space
your unique style and the way you
live every day.
We would love to hear from you and welcome
your thoughtful feedback. Visit our website
at canadiantire.ca to tell us about your
experience, and share your photos with us
using #mycanvasstyle.
Show us how you bring CANVAS® products
to life. We can’t wait to see!

Tools Required 4
Parts List—Right Arm Loveseat 5
Step-by-step Guide 7
Parts List—Left Arm Loveseat 11
Step-by-step Guide 13
Parts List—Corner Chair 17
Step-by-step Guide 19
Parts List—Side table 24
Step-by-step Guide 26
Instruction for Use 23
Caring for Your Item 31
Warranty 31
TABLE OF CONTENTS
• Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
• The maximum weight capacity for the loveseat and corner chair is 225 lb (102 kg)
per seat; maximum weight capacity for table is 44 lb (20 kg). Do not stand on
loveseat, corner chair or side table.
• Any assembly or maintenance of the product must be carried out by adults only.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• To prevent damage, place all parts on a level surface during assembly. Add a
layer of protective surface if needed.
• Due to the nature of steel, surface oxidation (rusting) will occur if this protective
coating is scratched. This is a natural process. To minimize this condition, it is
recommended that care be taken when assembling and handling the product in
order to prevent the paint from being scratched.
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND USING THE PRODUCT.
3MORAINE SECTIONAL SET

MORAINE SECTIONAL SET4
TOOLS REQUIRED
Hex Key (included) 2 people
Before beginning assembly of this product, be sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part appears to be missing or damaged,
do not begin assembly of this product and call customer service immediately.
Wrench (included)

PARTS LIST—RIGHT ARM LOVESEAT
ITEM DESCRIPTION THUMBNAIL QUANTITY
1Loveseat back—right 1
2Loveseat base—right 1
3Right arm 1
4Seat cushion 2
5Back cushion 2
6Plastic foot 4
5
10 Bolster cushion 1
MORAINE SECTIONAL SET

EXPLODED PARTS
1
2
3
4
10
4
55
6
6
6
6
6
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
A
B
Screw M6*18
Screw M6*40
Screw M6*45
4
C
1
3
D
E
Washer M6 8
Hex key 1
F
G
Nut 4
Spring washer 4
H
I
Washer M8 4
Wrench 1
MORAINE SECTIONAL SET

STEP-BY-STEP GUIDE
STEP 1
Place the right arm 3onto a non-abrasive surface, such
as a carpet, with its inside facing upwards. Attach two
plastic feet 6to right arm panel 3with nuts F, spring
washers G and washers Husing wrench I, aligning the
holes. Repeat step to attach plastic foot 6 to loveseat
back—right 1, and to loveseat base—right 2, with nuts F,
spring washers G and washers Husing wrench I. When
assembled, tighten all screws with wrench I.
7
2x1 1x1
6x4
Gx4
3x1
Fx4
x4 IH x1
6
2
6
6
6
3
1
F
G
H
MORAINE SECTIONAL SET

7
STEP 2
Place the loveseat back—right 1onto a non-abrasive
surface, such as a carpet, with its inside facing upwards.
Attach the loveseat base—right 2to loveseat back—right
1, with screws A, Cand washers Dusing hex key E,
aligning the holes.
8
2
1
NOTE:
Do not fully tighten screws
until you have assembled
the loveseat. Once assembly
is complete, then fully
tighten each screw.
Cx3
ED x1
Ax1
x4
D
C
D
A
MORAINE SECTIONAL SET

STEP-BY-STEP GUIDE
STEP 3
Place the right arm 3onto a non-abrasive surface,
such as a carpet, with its inside facing upwards. Attach
the loveseat base—right 2and back—right 1to the right
arm 3with screws A, butterfly bolt Band washers D
using hex key E, aligning the holes. When assembled,
tighten all screws with hex key E.
9
3
1
2
D
A
NOTE:
Do not fully tighten screws
until you have assembled
the loveseat. Once assembly
is complete, then fully
tighten each screw.
Bx1
ED x1
Ax3
x4
D
B
MORAINE SECTIONAL SET

7
STEP 4
Put seat cushions 4, back cushions 5and bolster
cushion 10 on the seat.
5X2 4X2
10 X1
10
4
4
10
5
5
MORAINE SECTIONAL SET

PARTS LIST—LEFT ARM LOVESEAT
11
ITEM DESCRIPTION THUMBNAIL QUANTITY
7Loveseat back—left 1
8Loveseat base—left 1
9Left arm 1
4Seat cushion 2
5Back cushion 2
6Plastic foot 4
MORAINE SECTIONAL SET
10 Bolster cushion 1

EXPLODED PARTS
12
7
8
9
44
55
66
6
6
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
MORAINE SECTIONAL SET
A
B
Screw M6*18
Screw M6*40
Screw M6*45
4
C
1
3
D
E
Washer M6 8
Hex key 1
F
G
Nut 4
Spring washer 4
H
I
Washer M8 4
Wrench 1
10

STEP-BY-STEP GUIDE
13
F
G
H
STEP 1
Place the left arm 9onto a non-abrasive surface, such as
a carpet, with its inside facing upwards. Attach two plastic
feet 6to left arm panel 9with nuts F, spring washers G
and washers Husing wrench I, aligning the holes. Repeat
step to attach plastic foot 6to loveseat back—left 7, and
to loveseat base—left 8 with nuts F, spring washers G
and washers Husing wrench I. When assembled, tighten
all screws with wrench I.
8x1 7x1
6x4
Gx4
9x1
Fx4
x4 IH x1
6
8
6
6
6
9
7
MORAINE SECTIONAL SET

STEP 2
14
STEP 2
Place the loveseat back—left 7onto a non-abrasive
surface, such as a carpet, with its inside facing upwards.
Attach the loveseat base—left 8to loveseat back—left 7,
with screws A, Cand washers Dusing hex key E,
aligning the holes.
8
7
NOTE:
Do not fully tighten screws
until you have assembled
the loveseat. Once assembly
is complete, then fully
tighten each screw.
Cx3
ED x1
Ax1
x4
D
C
D
A
MORAINE SECTIONAL SET

STEP-BY-STEP GUIDE
STEP 3
Place the left arm 9onto a non-abrasive surface, such
as a carpet, with its inside facing upwards. Attach the
loveseat back—left 7to the loveseat base—left 8with
screws A, butterfly bolt Band washers Dusing hex key
E, aligning the holes. When assembled, tighten all screws
with hex key E.
15
9
7
D
A
NOTE:
Do not fully tighten screws
until you have assembled
the loveseat. Once assembly
is complete, then fully
tighten each screw.
Bx1
ED x1
Ax3
x4
D
B
8
MORAINE SECTIONAL SET

7
STEP 4
Put seat cushions 4, back cushions 5and bolster
cushion 10 on the seat.
5x2 4x2
16
4
4
5
5
10
MORAINE SECTIONAL SET
10 x1

PARTS LIST—CORNER CHAIR
ITEM DESCRIPTION THUMBNAIL QUANTITY
1Chair back 1
2Chair base 1
3Seat cushion 1
4Back cushion 3
5Plastic foot 5
17
MORAINE SECTIONAL SET

EXPLODED PARTS
18
1
5
5
5
5
5
44
4
2
3
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
A
B
Screw M6*18 2
C
Screw M6*45 4
Washer M6 6
D
E
Hex key 1
Nut 5
F
G
Spring washer 5
Washer M8 5
H
I
Wrench 1
Plastic connector 4
MORAINE SECTIONAL SET

STEP-BY-STEP GUIDE
STEP 1
Place the chair base 2onto a non-abrasive surface, such
as a carpet, with its bottom facing upwards. Attach two
plastic feet 5to the chair base 2with nuts E, spring
washers Fand washers Gusing wrench H, aligning the
holes. Repeat step to attach plastic feet 5to chair back
1. When assembled, tighten all screws with wrench H.
19
2
5
5
55
5
1
E
F
G
2x1 1x1
Ex5
Gx5
5x5
Fx5
Hx1
MORAINE SECTIONAL SET

STEP 2
Place the chair back 1onto a non-abrasive surface,
such as a carpet, with its inside facing upwards.
Attach the chair base 2to chair back 1with
screws Band washers Cusing hex hey D,
aligning the holes.
20
2
1
NOTE:
Do not fully tighten screws
until you have assembled
the chair. Once assembly
is complete, then fully
tighten each screw.
Cx4
Dx1
Bx4
MORAINE SECTIONAL SET
C
B