Canvas HALLWAY TREE 068-7867-6 User manual

HALLWAY TREE
MODEL NO. 068-7867-6
ASSEMBLY INSTRUCTIONS
Toll-free: 1–888–670–6684
IMPORTANT: Please read and understand this manual before any assembly. Before beginning
assembly of the product, make sure all parts are present. Compare parts with packaging contents
list. If any part is missing, or if you have any questions, contact the service centre at
1–888–670–6684 (toll–free).

Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

I
3
IMPORTANT SAFETY INSTRUCTIONS
Table of Contents 3
Important Safety Instructions 3
Parts List 4
Assembly 6
22
Technical Specifications
22
Warranty
IMPORTANT: Retain for future reference, and read carefully.
I
I
D
.
I
D
I
TOP
FENCE
I
TOP
FENCE
• This product is intended for indoor use.
•The product should be placed on flat, horizontal ground.
• Any assembly or maintenance of the product must be carried out by adults only.
•Plastic bags can be dangerous. To avoid danger of suocation keep all bags
away from babies and children.
TABLE OF CONTENTS
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using this product.

4 MODEL NO. 068-7867-6
Back panel (large) - 1
Support panel - 3
Back panel - 1
Top trim - 1
Top - 1
Top trim - 1
Bottom - 1
Fixed shelf - 1
Left side panel - 1
Right side panel - 1
Support feet - 1
Upper side panel - 2
Feet - 4
Left drawer side - 2
PARTS LIST
1
11
12
13
14
15
16
Right drawer side - 2
17
Drawer back - 2
18
2
3
4
5
6
7
8
9
Divider - 1
10
Drawer bottom - 2
19
Left drawer face - 1
20
Right drawer face - 1

PARTS LIST
- 24
G
H
I
J
K
L
M
N
Rail track (left) - 2
Bolt M6 x 40 mm - 4
Spring washer - 4
Rail track (right) - 2
Cam bolt - 10
Cam - 10
Metal washer - 4
Wood dowel 7.8 x 30 mm - 26
Glue - 2
Screw 5 x 50 mm - 27
Screw 4 x 20 mm - 3
A
B
C
D
E
Wood dowel 7.8 x 20 mm - 5
O
P
Q
R
S
Screw 3.8 x 35 mm - 8
Drawer connector - 4
Screw 4.7 x 12.5 mm - 8
T
Knob - 2
U
Bolt M4 x 24 mm - 2
V
Wall anchor - 2
W
Hanger - 4
X
Drawer connector - 8
Y
Screw 3 x 16 mm - 8
Z
Plastic cover - 2
Hex wrench - 1
Screw 3.5 x 12 mm - 8
5
Screw 3.5 x 12 mm
F
Screw (black) 3.5 x 12 mm - 8

6 MODEL NO. 068-7867-6
ASSEMBLY
•
•
•
•
HELPFUL HINTS
Read each section carefully before starting. It is very important that each step is performed in
Make sure all parts are included. Most board parts are labelled or stamped on the raw edge.
Work in spacious area, preferably on a carpet, near the place the unit will be located.
Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
• Identify, sort and count the parts before beginning assembly.
• Compression dowels should be tapped in with a rubber mallet.
• Slides have a lip on the right side only.
• Back panels provide stability and support. Unit may collapse without the back panel installed.
• Clean the product with your choice of furniture polish and a soft cloth. DO NOT USE harsh
chemicals nor abrasive cleaners.
• Move your new furniture carefully. Two people are needed to lift and carry the unit to its new
location.
• Never push nor drag your furniture (especially on a carpet).
Important Note:
+/- on the cam should be positioned
as shown.
Do not overtighten the cam bolt.
1. 2. 3.
4. 5.
These illustrations show how the cam fastening system works.
160°~185°
Needed for assembly:
Rubber mallet Star-head
screwdriver
Flat-head
screwdriver
2 people
Scissor

I
D
.
I
D
.
I
D
.
I
D
.
TOP
.
Step 1
Requires 1, A, B
Step 2 x 2
Requires 13, A, B
TOP
TOP
ASSEMBLY
7
A
B
7.8 x 30 mm
A
B
7.8 x 30 mm
AB
A
B
1
13

Step 3
Requires 1, 3, 13, C
Step 4
Requires 4, 5, B, D, E, I
8 MODEL NO. 068-7867-6
ASSEMBLY
C
B
D
E
I
7.8 x 20 mm 4 x 20 mm
5 x 50 mm
E
D
B
I
C
5
4
1
13
3
13

I
D
.
I
D
.
Step 5
Requires 1, 4, C
Step 6
ASSEMBLY
9
C
C 5 x 50 mm
4
1
Requires 8, A, B
A
B
7.8 x 30 mm
A
B
8

6
I
I
Step 7
Step 8
Requires 9, A, B
Requires 6, I
10 MODEL NO. 068-7867-6
ASSEMBLY
A
B
7.8 x 30 mm
AB
9

I
D
.
I
D
.
Step 9
Requires 10, A, B, F, G, H
ASSEMBLY
11
F G
3.5 x 12 mm
A
B
7.8 x 30 mm H
10
F
H
F
F
F
H
G
G
AB
10
081 °

12 MODEL NO. 068-7867-6
J
J
8
9
10
Step 10
Requires 8, 9, 10, J
Step 11
Requires 6, 11, C
ASSEMBLY
C 5 x 50 mm
4
6
C
11

C 5 x 50 mm
J
I
D
.
I
D
.
Step 12
Requires 2, 6, C, J
Step 13
ASSEMBLY
13
O
L
O
M N
Requires 14, L, M, N, O
M6 x 40mm
L
O
14
14
14
14
14
N
M
J
C
6
2

F G
3.5 x 12 mm H
GG
H
H
8
8
9
9
Step 14
Requires F, G, H
14 MODEL NO. 068-7867-6
ASSEMBLY
F
F
F
F

I
D
.
I
D
.
Step 15 x 2
Requires 15, F, G
Step 16 x 2
Requires 16, F, H
ASSEMBLY
15
F G
3.5 x 12 mm
F
F
G
H
15
16
F H
3.5 x 12 mm

Step 17 x 2
Requires 15, 16, 17, P, Q, R
Step 18 x 2
Requires 18, 19, 20, S, T, U
16 MODEL NO. 068-7867-6
ASSEMBLY
3.5 x 12 mm3.8 x 35 mm
P
Q
R
P
Q
S
U
T
R
15
16
17
18
19
20
M4 x 24 mm4.7 x 12.5 mm
S
T
U
&

I
D
.
I
D
.
Step 19
Requires K, W
ASSEMBLY
17
KW
3.5 x 12 mm
K
W
K
W

Step 20
Requires 7, 12, A, B, C, D
18 MODEL NO. 068-7867-6
ASSEMBLY
D 7.8 x 20 mm
C 5 x 50 mm
A
B
7.8 x 30 mm
A
B
C
D
12
12
12
7
A

I
D
.
I
D
.
Step 21
Requires X, Y
ASSEMBLY
19
X Y 3 x 16 mm
X
Y
X
Y
°90

Step 22
Requires C, V, Z
20 MODEL NO. 068-7867-6
ASSEMBLY
C
V
Z
C
V
Z
5 x 50 mm
19
20
Safety warning:
Always be sure to follow
manufacturer directions
completely. Neglecting
to fasten the any anti-tip
restraint can result in
injury.
WALL