Canvas ELLIS 168-0011-6 User manual

ELLIS 4-SHELF BOOKCASE
MODEL NO. 168-0011-6
ASSEMBLY INSTRUCTIONS
Toll-free: 1–888–670–6684
IMPORTANT: Please read and understand this manual before beginning assembly of the
product, and make sure all parts are present. Compare parts with packaging contents
list. If any part is missing, or if you have any questions, contact the service centre at
1–888–670–6684 (toll free).

Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

3
IMPORTANT SAFETY INSTRUCTIONS
Table of Contents 3
Important Safety Instructions 3
Parts List 4
Assembly
6
24
Technical Specifications
24
Warranty
IMPORTANT: Retain for future reference, and read carefully.
• This product is intended for indoor use.
•The product should be placed on flat, horizontal ground.
• Any assembly or maintenance of the product must be carried out by adults only.
•Plastic bags can be dangerous. To avoid danger of suocation keep all bags
away from babies and children.
TABLE OF CONTENTS
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using this product.

4 MODEL NO. 168-0011-6
PARTS LIST
Upper side panel - 2
Upper fixed shelf - 2
Trim - 2
Middle fixed shelf - 1
Trim - 1
Trim - 1
Lower left side panel - 1
Lower side front rail - 2
1
3
Upper side front rail - 2
2
4
5
6
7
8
9
10
Lower right side panel - 1
Top - 1
Upper back panel - 3
11
Bottom - 1
13
Lower fixed shelf - 1
12
14
15
Lower back panel - 2
16
Left door - 1
Right door - 1
17

PARTS LIST
5
Wood dowel 7.8 x 30 mm - 32
Wood dowel 7.8 x 20 mm - 4
Double-end cam bolt - 4
Wood dowel 7.8 x 50 mm - 4
Screw 4 x 25 mm - 6
Hinge - 4
Handle - 2
Bolt M4 x 12 mm - 4
A
Cam - 42
C
Cam bolt - 34
B
D
E
F
G
H
I
J
Screw 3.5 x 12 mm - 18
Screw 5 x 50 mm - 4
Fabric strip - 2
Wall anchor - 2
Metal washer - 4
Screw 3.8 x 35 mm - 2
Drawer connector - 20
L
Screw 3 x 16 mm - 22
N
Magnet - 1
M
O
P
Q
R
S
T
U
K
Metal plate - 2
V
Glue - 3
W
Screw 4 x 14 mm - 2
Sticker - 36

6 MODEL NO. 168-0011-6
ASSEMBLY
•
•
•
•
HELPFUL HINTS
Read each section carefully before starting. It is very important that each step is performed in
the correct order. If these steps are not followed in sequence, assembly diculties will occur.
Make sure all parts are included. Most board parts are labelled or stamped on the raw edge.
Work in a spacious area, preferably on a carpet, near the place the unit will be located.
Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
• Identify, sort and count the parts before beginning assembly.
• Compression dowels should be tapped in with a rubber mallet.
• Slides have a lip on the right side only.
• Back panels provide stability and support. Unit may collapse without the back panel installed.
• Clean the product with your choice of furniture polish and a soft cloth. DO NOT USE harsh
chemicals nor abrasive cleaners.
• Move your new furniture carefully. Two people are needed to lift and carry the unit to its new
location.
• Never push nor drag your furniture (especially on a carpet).
Needed for assembly:
Rubber mallet Star-head
screwdriver
Flat-head
screwdriver
2 people
Important Note:
+/- on the cam should be positioned
as shown.
Do not overtighten the cam bolt.
1. 2. 3.
4. 5.
These illustrations show how the cam fastening system works.
160°~185°

7
ASSEMBLY
Step 1
Requires 2, B
Step 2
Requires 1, A, B, V
A
A
1
B
B
B
B
2
V
V
x 2
x 2

ASSEMBLY
8 MODEL NO. 168-0011-6
Step 3
Requires 1, 2, C
Step 4
Requires 5, B
B
B
2
C
C
1
5
x 2
x 2

9
ASSEMBLY
Step 5
Requires 4, 5, A, C, V
Step 6
Requires 1, 4, C
A
5
C
C
C
4
4
4
A C V
1
V
x 2

ASSEMBLY
10 MODEL NO. 168-0011-6
Step 7
Require 14
Step 8
Requires 1, C
1
C
C
4
14