Canvas GALIANO 188-0399-6 User manual

ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
GALIANO 3-PIECE
FIRE CHAT SET - CHAIR
PRODUCT NO. 188-0399-6

To the trend seekers and design mavens,
CANVAS™ is the furniture and décor brand
that helps you imagine and create a space
you can be proud of.
That’s because CANVAS™
ease with products that are made for real life
and Canadian inspired.
We would love to hear from you and welcome
your thoughtful feedback. Visit our website
at canadiantire.ca to tell us about your
experience, and share your photos with us
using #myCANVASstyle.
Show us how you bring CANVAS™ products
to life. We can’t wait to see!

Tools Required 3
Parts List 4
Step-by-step Guide 7
Before You Begin Assembly 6
Caring for Your Item 12
Warranty 12
TABLE OF CONTENTS
• Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
• The maximum weight capacity for the chair is 225 lb (102 kg). Maximum weight
capacity for table is 44 lb (20 kg). Do not stand on the product.
• Any assembly or maintenance of the product must be carried out by adults only.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• To prevent damage, place all parts on a level surface during assembly. Add a
layer of protective surface if needed.
• Due to the nature of steel, surface oxidation (rusting) will occur if this protective
coating is scratched. This is a natural process. To minimize this condition, it is
recommended that care be taken when assembling and handling the product in
order to prevent the paint from being scratched.
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND USING THE PRODUCT.
TOOLS REQUIRED
Hex Key (included) 1 person
3
GALIANO 3-PIECE FIRE CHAT SET

PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
1Chair back 1
2Chair seat panel 1
3Right arm 1
4Left arm 1
5Seat cushion 1
6Back cushion 1
GALIANO 3-PIECE FIRE CHAT SET4

EXPLODED PARTS
1
2
3
4
5
6
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
A
B
Screw M6*20 4
C
Screw M6*40 6
10
5
D
Washer M6
1
Hex key
GALIANO 3-PIECE FIRE CHAT SET

GALIANO 3-PIECE FIRE CHAT SET6
BEFORE YOU BEGIN ASSEMBLY
?
MAKE SURE ALL PARTS ARE PRESENT
Compare all pieces to the parts and hardware lists, and
make sure you have all tools required for assembly.
REMOVE PACKAGING MATERIALS
Place packing materials back in the box. Do not dispose of
packaging materials until assembly is complete.
READ EACH STEP CAREFULLY
Make sure you understand each step. If you have any questions,
contact CANVAS™ customer service at 1-888-670-6684 (toll free).
ASSEMBLE IN A CLEARED AREA
Place all parts from the box on the floor in front of you on a clean,
dry, level surface to protect the product as it is being built.

STEP-BY-STEP GUIDE
3x1 2x1
STEP 1
Place the right arm 3onto a non-abrasive surface, such
as a carpet, with its inside facing upwards. Attach seat
panel 2to right arm 3with screws Aand washers C
using hex key D. Do not tighten completely. Cx2
Dx1
Ax2
2
3
C
A
NOTE:
Do not fully tighten screws
until you have assembled
the chair. Once assembly is
complete, then fully tighten
each screw.
7GALIANO 3-PIECE FIRE CHAT SET

STEP 2
Place the chair back 1onto a non-abrasive surface,
such as a carpet, with its inside facing upwards.
Attach seat panel 2to chair back 1with screws B
and washers C using hex key D. Do not tighten
completely
x2
1x1
Dx1 Cx2
2
1
3
C
B
NOTE:
Do not fully tighten screws
until you have assembled
the chair. Once assembly is
complete, then fully tighten
each screw.
8GALIANO 3-PIECE FIRE CHAT SET

STEP-BY-STEP GUIDE
STEP 3
Place the left arm 4onto a non-abrasive surface, such
as a carprt, with its inside facing upwards. Attach seat
panel 2to left arm 4with screws Aand washers C
using hex key D. Do not tighten completely.
NOTE:
Do not fully tighten screws
until you have assembled
the chair. Once assembly is
complete, then fully tighten
each screw.
2
4
C
A
Ax2 4x1
Dx1 Cx2
9GALIANO 3-PIECE FIRE CHAT SET

STEP 4
Attach chair back 1to right arm 3and left arm 4
with screws Band washers 4. When assembled,
tighten all screws with hex key D. Repeat steps
1-4 for second chair.
Cx4
Bx4
Dx1
CB
10 GALIANO 3-PIECE FIRE CHAT SET