Canvas ROBSON 168-0046-4 User manual

MODEL NO. 168-0046-4
ROBSON NARROW BOOKCASE
ASSEMBLY INSTRUCTIONS
Toll free: 1-888-670-6684
IMPORTANT: Please read this manual carefully before beginning assembly of this
product. Keep this manual for future reference.

IMPORTED BY TRILEAF DISTRIBUTION TRIFEUIL TORONTO, CANADA M4S 2B8
MADE IN CHINA

3
IMPORTANT SAFETY INSTRUCTIONS TABLE OF CONTENTS
IMPORTANT: Retain for future reference, and read carefully.
IMPORTANT SAFETY INSTRUCTIONS TABLE OF CONTENTS
Important Safety Instructions 3
Parts List 4
Assembly Preparation 7
Assembly 8-34
Cleaning and Maintenance 35
Technical Data 35
Warranty 36
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using the bookcase.
Death or serious injury may occur when children climb on storage or bookcase
type furniture. A remote control or toys placed on the furniture may encourage a
child to climb on the furniture and as a result may tip over onto the child.
NEVER allow children to climb or play with storage or bookcase type furniture.
NEVER place toys, food, remote, etc. on top of storage or bookcase type
furniture
ALWAYS use either the safety hardware as instructed or other wall anchoring
device.
Placing TVs on furniture that are not designed to support a television is hazardous,
which may result in injury or death.
This product is not designed to support a television.
Overloading shelves may result in furniture that can break or sag, or tip over which
may result in injury.
NEVER exceed the weight limits shown in the instructions.
Place the heavier items on lower shelves as far back from the front as possible.
Load the bottom surfaces first to avoid top-heavy furniture.
Moving furniture that is not designed to be moved or equipped with castors may
result in injury or damage to furniture or personal property.
ALWAYS unload shelves, starting with the top surfaces, before moving.
NEVER push or pull furniture on carpet. Have a friend help lift properly to
move and/or reposition it.
This unit must be positioned against wall.

MODEL NO. 168-0046-4
4
PARTS LIST
MODEL NO. 168-0046-4
Upper Middle Shelf - 1
Lower Right End - 1
J
Upper Right End - 1
I
Door - 1
H
Cabinet Back - 1
G
Cabinet End - 2
E
A
B
C
D
Cabinet Bottom - 1
Cabinet Top - 1
Top Shelf - 1

5
PARTS LIST
K
L
M
N
Brace - 2
Lower Left End - 1
Upper Left End - 1
Lower Middle Shelf - 1
Hidden Cam - 6
1
Cam Screw - 6
2
Wood Dowel - 6
3
Applique Card - 1
4
Magnetic Catch - 1
5
Strike Plate - 1
7
Pull - 1
8
Pivot Hinge Set - 1
6

MODEL NO. 168-0046-4
6
PARTS LIST
MODEL NO. 168-0046-4
Bushing - 2
9
Black 5/8” Pan Head Screw - 2
14
Black 1/2” Pan Head Screw- 4
17
Black 1/2” Flat Head Screw- 3
18
Black 1- 1/2” Flat Head Screw - 6
11
Black 1/2” Machine Screw - 8
15
Black 1-3/8” Wafer Head - 12
12
Black 1/2” Hex Head Screw - 4
16
Black 1-1/8” Wafer Head Screw - 8
13
L-Wrench - 1
10
Furniture Tipping Restraint Kit - 1
98

7
ASSEMBLY PREPARATION
IMPORTANT: Please read and understand this manual before any assembly. Before beginning
assembly of product, make sure all parts are present. Compare parts with packaging contents
list. If any part is missing, or if you have any questions, contact the service centre at
1-888-670-6684 (toll free).
Place all parts from the box in a cleared area and position them on the floor in front of you.
Remove all packing materials and place them back into the box. Do not dispose of the packing
materials until assembly is complete. Read each step carefully before beginning any assembly
and make sure you understand each step. If you are missing a part, please call our toll-free
number for assistance 1-888-670-6684.
LET US HELP YOU!
DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST!
1-888-670-6684
If you have questions regarding your product, require warranty
assistance, or have damaged or missing parts, please call our customer
service toll-free helpline. Contact us for assistance, we’re here to help.
CAUTION!
• Proper placement of your bookcase is essential.
• Keep children away during assembly.
This product contains small parts which can be swallowed by children.
• Keep fingers away from the places where they can be pinched or trapped
• Do not attempt to assemble the bookcase if any parts are missing.
Needed for Assembly:
Hammer
No. 2 Phillips Screwdriver
Tip Shown Actual Size 1 person
Electric drill with 1/8" bit
(ONLY in indicated step)

8MODEL NO. 168-0046-4
ASSEMBLY
Step 1
Requires E, G, 1
Push six HIDDEN CAMS (1) into the CABINET ENDS (E) and CABINET BACK (G).
E
E
G
1
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Hole
Arrow
(6 used)
Arrow
1

9
ASSEMBLY
Step 2
Requires I, J, K, L, 15
Fasten the UPPER RIGHT END (I) to the LOWER RIGHT END (J). Use four BLACK 1/2”
MACHINE SCREWS (15).
Fasten the UPPER LEFT END (K) to the LOWER LEFT END (L). Use four BLACK 1/2”
MACHINE SCREWS (15).
15
I
J
15
15
K
L
Holes
No holes

10 MODEL NO. 168-0046-4
ASSEMBLY
Step 3
You have the option to assembly your unit with the door opening to the left or to the
right. The two options are shown below. Follow step 4-15 for the right option and steps
16-27 for the left option.
DOOR OPENING RIGHT DOOR OPENING LEFT

11
ASSEMBLY
Step 4 - Door opening right
Requires C, 2, 3, 5, 9, 14
Turn six CAM SCREWS (2) into the exact holes shown in the CABINET TOP (C).
Fasten the MAGNETIC CATCH (5) to the CABINET TOP (C). Use two BLACK 5/8” PAN
HEAD SCREWS (14).
Push a BUSHING (9) into the exact hole shown in the CABINET TOP (C).
Insert three WOOD DOWELS (3) into the exact holes shown in the CABINET TOP (C).
2
2
2
C
5
9
3
3
3
14
53
14
9
DOOR OPENING RIGHT

12 MODEL NO. 168-0046-4
ASSEMBLY
Step 5
Requires C, G
Fasten the CABINET TOP (C) to the CABINET BACK (G). Tighten two HIDDEN CAMS.
NOTE: Ensure the WOOD DOWEL in the CABINET TOP has been inserted into the hole
in the CABINET BACK.
1
2
C
G
Surface with
HIDDEN CAMS
DOOR OPENING RIGHT

13
ASSEMBLY
Step 6
Requires E
Fasten the CABINET ENDS (E) to the CABINET TOP (C). Tighten four HIDDEN CAMS.
NOTE: Ensure the WOOD DOWELS in the CABINET TOP have been inserted into the
holes in the CABINET ENDS.
Surface with
HIDDEN CAMS
Surface without
HIDDEN CAMS
DOOR OPENING RIGHT
C
E
E

14 MODEL NO. 168-0046-4
ASSEMBLY
Step 7
REQUIRES D, 3, 11
Insert three WOOD DOWELS (3) into the CABINET ENDS (E) and CABINET BACK (G).
Fasten the CABINET BOTTOM (D) to the CABINET ENDS (E) and CABINET BACK (G). Use
six BLACK 1-1/2” FLAT HEAD SCREWS (11).
NOTE: Ensure the WOOD DOWELS in the CABINET ENDS and CABINET BACK have been
inserted into the holes in the CABINET BOTTOM.
DOOR OPENING RIGHT
E
D
E
3
3
3
11
Surface with
more holes
11
G

15
ASSEMBLY
Step 8
Requires K, L, 13
Fasten the LOWER LEFT END (L) to the CABINET BOTTOM (D). Use two BLACK 1-1/8”
WAFER HEAD SCREWS (13).
13
13
D
L
K
DOOR OPENING RIGHT

16 MODEL NO. 168-0046-4
ASSEMBLY
Step 9
Requires M, 10, 13, 16
Fasten the BRACES (M) to the LOWER LEFT END (L). Turn two BLACK 1/2” HEX HEAD
SCREWS (16) with the L-WRENCH (10).
Fasten the BRACES (M) to the CABINET BOTTOM (D). Use four BLACK 1-1/8” WAFER
HEAD SCREWS (13). Do not tighten SCREW (13) at this time.
DOOR OPENING RIGHT
L
M
M
D
1610
16
13
13
13

17
ASSEMBLY
Step 10
Requires A, B, N, 12, 98
Open the FURNITURE TIPPING RESTRAINT KIT (98) and fasten the SAFETY STRAP to the
TOP SHELF (A). Use the short screw through the hole in the strap and into the top surface
of the TOP SHELF (A).
Fasten the SHELVES (A and B) to the UPPER END (K) and the LOWER MIDDLE SHELF (N)
to the LOWER LEFT END (L). Use six BLACK 1-3/8” WAFER HEAD SCREWS (12).
DOOR OPENING RIGHT
NOTCH
12
SAFETY
STRAP
SHORT
SCREW
A
A
B
N
L
K
Surface with holes
12 98

18 MODEL NO. 168-0046-4
ASSEMBLY
Step 11
Requires I, J, 10, 12, 13, 16
Fasten the LOWER RIGHT END (J) to the BRACES (M). Turn two BLACK 1/2” HEX HEAD
SCREWS (16) with the L-WRENCH (10).
Fasten the LOWER RIGHT END (J) to the CABINET BOTTOM (D). Use two BLACK 1-1/8”
WAFER HEAD SCREWS (13).
Fasten the LOWER RIGHT END (J) to the LOWER MIDDLE SHELF (N). Use two BLACK
1-3/8” WAFER HEAD SCREWS (12).
Fasten the UPPER RIGHT END (I) to the SHELVES (A and B). Use four BLACK 1-3/8”
WAFER HEAD SCREWS (12). Tighten all SCREWS.
16
10
13
I
J
M
M
D
A
B
N
12
12
13
16
16
DOOR OPENING RIGHT
Tighten these screws.

19
ASSEMBLY
Step 12
Requires H, 6, 7, 8, 17, 18
Fasten a PIVOT HINGE (6) to the DOOR (H). Use two BLACK 1/2” PAN HEAD SCREWS (17).
Fasten the STRIKE PLATE (7) to the DOOR (H). Use a BLACK 1/2” FLAT HEAD SCREW (18).
Fasten the PULL (8) to the DOOR (H). Use two
BLACK 1/2” FLAT HEAD SCREWS (18).
H
17
18
8
7 86
DOOR OPENING RIGHT
6
17
18
18 7

20 MODEL NO. 168-0046-4
ASSEMBLY
Step 13
Requires H, 6, 9, 17
Carefully stand your unit upright.
1. Push a BUSHING (9) into the hole in the CABINET BOTTOM (D). Then, insert a PIVOT
HINGE (6) into the BUSHING.
2. Insert the PIVOT HINGE, which is fastened to the DOOR (H), into the hole in the
CABINET TOP (C). You will need to tilt your DOOR slightly.
3. Next, tip the DOOR in and fasten the free HINGE to the DOOR. Use two BLACK 1/2”
PAN HEAD SCREWS (17).
1st
2nd
3rd H
6
C
D
9
17
DOOR OPENING RIGHT
176 9