Canvas 088-17 17-2 User manual

CATALINA COLLECTION ROCKING CHAIR
PRODUCT N0. 088-1717-2
ASSEMBLY INSTRUCTIONS
Toll-free: 1-888-670-6684
IMPORTANT: Please read this manual carefully before beginning assembly of this product.
Keep this manual for future reference.

3
TABLE OF CONTENTSIMPORTANT SAFETY INSTRUCTIONS
MADE IN CHINA
IMPORTED BY TRILEAF DISTRIBUTION TRIFEUIL TORONTO, CANADA M4S 2B8
Table of Contents 3
Important Safety Instructions 3
Part List 4
Assembly 5-7
Cleaning and Maintenance 8
Technical Specications 8
Warranty 9
IMPORTANT: Retain the manual for future reference, and read the instructions
carefully.
• Always place the product on at, horizontal ground.
• Any assembly or maintenance of the product must be carried out by adults only.
• Make sure there is sucient manpower when assembling or moving the product.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• Check all screws periodically for tightness. When required, tighten them.
• Repairing and replacing parts should be done by a qualied technician.
• Do not use the product in heavy wind conditions, it could tip over and cause injuries to
the user or passersby.
• Do not use the product if it is in inverted position. Failure to follow could result in serious
injury.
• Never stand on the product. Failure to follow could result in serious injury.
• The product can accommodate only one person at a time. Failure to follow could result
in serious injury.
• Do not exceed the maximum load (120 Kg) of the product.
• If the product is not be used for a long period (e.g. winter time), store it in a clean, dry
environment.
• Do not light re near the product.
• Retain the original packaging to store the product.
WARNING!
To reduce the risk of serious injury, read the following safety instructions
before assembling and using the product.
CAUTION!
Always keep children under close supervision while they are playing near
this product. Never leave children unattended. Keep pets away while
setting up the product.

4 5
PRODUCT NO. 088-1717-2
ASS E M BLY PART LIST
Chair - 1
Rocker - 2
Back Cushion - 1
Seat cushion - 1
1
2
3
4
Let us help you!
DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US
FIRST! 1-888-670-6684
If you have questions regarding your product, require warranty
assistance, or have damaged or missing parts, please call our
customer service toll-free helpline. Contact us for assistance, we’re
here to help.
IMPORTANT: Please read and understand this manual before any assembly.
Before beginning assembly of the product, make sure there are no missing parts.
Compare the parts with packaging contents list. If any part is missing, or if you
have any questions, contact the service center at 1-888-670-6684 (toll free).
Take all parts from the packaging box and position them on a clean oor. Remove
all packing materials and place them back into the box. Do not dispose of the
packing materials until the assembly is complete. Read each step carefully before
beginning any assembly and make sure you understand each step. If any part is
missing, please call our toll-free number for assistance: 1-888-670-6684.
CAUTION!
• Check all screws periodically for tightness. If required tighten them.
• Keep children away during assembly.
This product contains small parts which can be swallowed by children.
• Keep ngers away from places where they can be pinched or trapped.
• Do not attempt to assemble the product if any part is missing.
Needed for assembly:
Hex key (included) 2 people
Front/Avant
Screw M6 x 38 - 4
A
Hex Key - 1
B

76 7
PRODUCT NO. 088-1717-2
ASS E M BLY
ASS E M BLY
Step 1
Requires 1, 2
Place the chair (1) in an inverted position on the ground. Align holes of the
rockers (2) with the holes located on the respective pairs of the side legs of the
chair.
Step 3
Requires 1, 3, 4,
Turn the chair (1) upright. Place the back cushion (3) and seat cushion (4) on the
chair. The chair is ready for use.
Step 2
Requires 1, 2, A, B
Attach the rockers (2) to the legs of the chair (1) using the screws (A). Tighten the
screws using the hex key (B).
BA
1
2
Front/Avant
Front/Avant
Front/Avant
Front/Avant
B
A
1
2
2a
1
3
4
NOTE:
• When placing the back cushion, make sure that the zipper (3a) on the back
cushion is facing downward.
• When placing the seat cushion, make sure that the circular corners (4a) of the
seat cushion are facing outward and the square corners (4b) of the seat cushion
are facing inward.
CAUTION!
When attaching the rocker, make sure that the arrow label (2a) on the
rocker is set above the front leg of the chair. If it is positioned incorrectly,
the chair may tilt.
4a
4a
4b 4b
3a

8 9
PRODUCT NO. 088-1717-2
MAINTENANCE
TECHNICAL DATA
WARRANTY
This CANVAS™product carries a one (1) year warranty against defects in
workmanship and materials. Trileaf Distribution agrees to replace the defective
product free of charge within the stated warranty period, when returned by the
original purchaser with proof of purchase. This product is not guaranteed against
wear or breakage due to misuse and/or abuse.
CAUTION!
• Check all screws periodically for tightness. If required, tighten them.
• If required to disassemble the rockers from the chair, follow the assembly
steps in the reverse order.
• Fabric colour may fade after prolonged exposure to light. Keep the cushions
indoors when not in use.
• If surface oxidation (rusting) occurs and no measures are taken to correct
it, the oxidation may start dripping onto the assembly surface, which may
cause damaging stains that may be dicult to remove.
Dimensions (L x W x H) 94 x 71.5 x 96 cm
37 x 28 1/8 x 37 3/4"
Product weight 120 kg
265 lb
• To wash the cushions:
- Use a soft bristle brush to clean;
- Always use a mild solution of soap and water. Never use detergent;
- Rinse with clean water. The water should be cold to lukewarm, never more
than 25°C (77°F);
- Remove excess moisture from the cushions using a dry towel. Do not place in
washing machine nor hand squeeze.
• Do not use bleach, acid, or other abrasive cleaners on the product.
• Steel components of garden accessories and furniture are treated with rust
inhibiting paint. However, due to the nature of steel, surface oxidation (rusting)
will occur if this protective coating is scratched. This is a natural process. To
minimize this condition, it is recommended that care be taken when assembling
and handling the product, in order to prevent the paint from being scratched.
Surface rust can be removed easily by applying a little cooking oil.