Canvas BALA YD-BALAC User manual

ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888 -670 -6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
BALA
CORNER CHAIR
PRODUCT NO. 088-0601-2
MODEL NO. YD-BALAC

We believe in the power of décor and its
ability to make up the fabric of your home.
That’s why collections draw
inspiration from Canadians and the way
they live.
From on-trend furniture pieces to holiday
décor and all your outdoor living essentials,
makes it easy to refresh your space
your unique style and the way you
live every day.
We would love to hear from you and welcome
your thoughtful feedback. Visit our website
at canadiantire.ca to tell us about your
experience, and share your photos with us
using #mycanvasstyle.
Show us how you bring products
to life. We can’t wait to see!
CANVAS™
CANVAS™
CANVAS™

BALA CORNER CHAIR3
Parts List 4
Step-by-step Guide
6
7
Caring for Your Item 11
Warranty
TABLE OF CONTENTS
TOOLS REQUIRED
Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
Any assembly or maintenance of the product must be carried out by adults only.
Some parts may contain sharp edges. Wear protective gloves if necessary.
To prevent damage, place all parts on a level surface during assembly. Add a
layer of protective surface if needed.
Due to the nature of steel, surface oxidation (rusting) will occur if this protective
coating is scratched. This is a natural process. To minimize this condition, it is
recommended that care be taken when assembling and handling the product in
order to prevent the paint from being scratched.
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND USING THE PRODUCT.
2 people
Torque Wrench "D1 " + Hex Bit "D2 "
Hardware List
11
Maximum weight limit: 250 lb (113.3 kg) per chair.
D1
D2

BALA CORNER CHAIR
4
PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
1Arm panel 1
2Back panel 1
3Seat panel 1
4Left back cushion 1
5Right back cushion 1
6Seat cushion 1

BALA CORNER CHAIR5
EXPLODED PARTS
12
3
45
6

BALA CORNER CHAIR 6
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
AM6x50 mm bolt 7
BWasher 14
CNut 7
Tools
D1/D2/D3 D1
D2
D3
EClip 2
1

BALA CORNER CHAIR7
STEP-BY-STEP GUIDE
2x 1
Bx 2
1x 1
Ax 1
STEP 1
Place the back panel
2onto a non-abrasive surface,
such as a carpet.
NOTE:
Do not tighten screws all
the way until you have
assembled the chair.
Once assembly is complete,
tighten each screw.
Cx 1
1
2
A
C
B
B
Insert the hook on back panel 2into arm panel 1as
illustrated by the picture below on the right. Fasten
the arm panel 1to the back panel 2with bolts A,
washers Band nuts C. Do not tighten bolts.

BALA CORNER CHAIR 8
STEP 2
Fasten the seat panel 3to the arm panel 1with
Bx 8 Cx4
Ax 4 3x 1
NOTE:
Do not tighten screws all
the way until you have
assembled the chair.
Once assembly is complete,
tighten each screw.
3
A
C
B
B
1
A
B
B
A
C
C
B
B
bolts washers Band nuts C.,A

BALA CORNER CHAIR9
STEP-BY-STEP GUIDE
STEP 3
Fasten the seat panel 3to the back panel 2with
bolts A, washers Band nuts C. Secure all of the bolts
using wrenches D1, D2
Make sure that all of the bolts have been tightened
completely.
Ax 2 Bx4
D1 x 1
Cx 2
x 1
D2 x 1
3
2
A
C
B
B
A
C
B
B
D3
and D3.

BALA CORNER CHAIR 10
STEP 4
Turn the chair to an upright position. Place cushions 4, 5
and 6onto the chair.
6x1
5x 1 4x 1
5
4
6
G
Please use the clips to connect and secure each
section together. Use of the clips is optional and
dependent upon the user's personal preference.
Securing Clips

WARRANTY INFORMATION
CARING FOR YOUR ITEM
1 3
4 5
CLEANING:
OFF SEASON:
5-YEAR LIMITED WARRANTY*
BALA CORNER CHAIR11
088-0601-2
2
and a one (1) year warranty