Canvas COLLINGWOOD GAZEBO User manual

COLLINGWOOD
GAZEBO
ASSEMBLY INSTRUCTIONS
Toll-free: 1-888-670-6684
IMPORTANT: Please read this manual carefully before beginning assembly of this product.
Keep this manual for future reference.
Production Number :xxxxxxxx
MODEL NO. 088-2022-8
PRODUCT NO. A102001100

IMPORTED FOR TRILEAF DISTRIBUTION TRIFEUIL TORONTO, CANADA M4S 2B8

DIMENSIONS
3
DIMENSIONS
308.50cm/121.46in
Post to Post
366.50 cm/144.29 in Post to Post
491.50 cm/193.50 in
Post to Post
338.50 cm/133.27 in Base to Base
280.50 cm/110.43 in
Base to Base
332.70 cm/130.98 in
2nd Roof Edge
392.4 cm/154.49 in 2nd Roof Edge
FRAME ROOF
Concrete Footer
Post Mount Anchoring Hardware not included
To Required
Depth

TABLE OF CONTENTS
Important Safety Instructions 5
Parts List 6
Assembly 9
Cleaning and Maintenance 35
35
Technical Data
36
Warranty
4MODEL NO. 088-2022-8 | PRODUCT NO. A102001100

IMPORTANT: Retain for future reference, and read carefully.
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using the gazebo.
Please check with your local governing authority/local municipal codes
regarding installation of structures before assembly.
Caution!
IMPORTANT:
Wood components are manufactured with Cedar wood which is coated with a water-
based stain. knots and small checks (cracks) are naturally occurring and do not aect
the strength of the product. It is advisable to annually maintain the wooden parts of the
gazebo with a coat of water-base water repellent sealant or outdoor wax oil to protect &
enhance the beauty of wood.
Always keep children under close supervision while they are using or around
this product. Never leave children unattended.
This product is intended for domestic outdoor use only.
The product should be placed on flat, horizontal ground.
Ensure enough clearance around the product. Before assembling the product, find level ground not less than
6' (1.8 m) away from any structures or obstructions, such as fences, garages, houses, overhanging branches,
laundry lines, or electrical wires.
This gazebo is not to be regarded as part of a building/house structure. The gazebo is to be anchored onto the
ground for added safety. Do not aassemble the gazebo onto soil/earth ground. It is best advisable to have the
gazebo built onto
aa wooden deck oorr ccoonnccrreettee ggrroouunndd ffoorr ssttaabbiilliityy.. If it iis ttoo bee buiild onto a wooden deck/ground,
do ensure that the wooden d eck/ground has a strong foundation. It is advisable to use appropriate floor
Plugs (not provided) to anchor the gazebo onto the wooden/concrete ground.
Some structures may require two or more people to install safely. Check for underground utilities before
digging or driving stakes into the ground.
During installation, follow all safety warnings provided with your tools, and use safety glasses.
In case you set up more than one gazebo, keep a minimum distance of 10' (3 m) between the gazebos.
Any assembly or maintenance of the product must be carried out by adults only.
Arrange necessary manpower when assembling or moving the product.
Some parts may contain sharp edges. Wear protective gloves if necessary.
Keep children and pets away while setting up the gazebo.
Check all nuts and bolts periodically to ensure bolts/nuts are tightened.
Reparing and replacing parts should be done by a qualified technician.
This gazebo is intended for decorative and sunshade purposes only, and it is not designed to withstand harsh
weather, including high winds, rain, and snow.
Do not light any fires inside or near the product!
Stay calm if fire breaks out. Search for the nearest exit. Do not return to the gazebo before firemen allow you
to do so.
Do not hang heavy weights on the roof frame.
Do not climb onto the roof of the gazebo. Falling off the gazebo can result in serious injury.
Retain the original packaging to store the gazebo.
5
IMPORTANT SAFETY INSTRUCTIONS

Hook - 1
Top Roof Small Panel - 2
Top Roof Long Panel - 2
Small Top Cover - 4
Base - 4
Post - 4
Base Cover -
Arc Support 1 - 4
Arc Support 2 - 4
Big Top Frame - 2
Big Top Bar - 2
Small Top Support Beam - 4
Slanting Bar Connector - 4
Middle Beam Connector - 4
Long Pipe 1 - 2
Long Pipe 2 - 2
Short Pipe 1 - 2
Short Pipe 2 - 2
Top Slanting Bar - 4
Top Beam - 4
Long Side Left Roof Panel 1 - 2
Small Top Roof Cover - 1
B1
E1
E2
Lateral Left Long Beam - 2
Lateral Right Long Beam - 2
Lateral Left Short Beam - 2
Lateral Right Short Beam - 2
Inner Medial Beam - 4
Inner $+.0 Beam -
Inner +*# Beam -
4
4
01
08
09 2
B3
02
03
04
05
06
07
10
11
A1
C1
F1
G1
H1
I1
F2
G2
P3
C3
D1
Small Top Connector - 1
6MODEL NO. 088-2022-8 | PRODUCT NO. A102001100
PARTS LIST

7
PARTS LIST
Long Side Right Roof Panel 1 - 2Big Roof Top Beam (Long Side) (1) - 4
Big Roof Top Beam (Long Side) (3) - 4
Big Roof Top Beam (Long Side) (5) - 4
Bolt M10*ĂĀĆ - 8 + 1 Spare
Flat Washer M6 - 206 + 11 Spare
Screw M5* -
1 + Spare
Nut M6 - 12 + 1 Spare
EE
Screw M5* - + Spare
Bolt M6*15 - 156 + 8 Spare
Bolt M6* 5 - 16 + 1 Spare
Bolt M8*3 - 16 + 1 Spare
II
Bolt M8*35 - 16 + 1 Spare
Bolt M6*55 - 14 + 1 Spare
Bolt M8*2Ć- + Spare
Long Side Left Roof Panel 2 - 2
Long Side Right Roof Panel 2 - 2
Long Side Left Roof Panel 3 - 2
Long Side Right Roof Panel 3 - 2
Short Side Roof Panel 1 -
2
Short Side Left Roof Panel 2 - 2
Short Side Right Roof Panel - 2
Big Roof Panel Cover (Corner) - 4
3
Big Roof Panel Cover (Middle) - 4
Big Roof Top Beam (Short Side) (1) - 4
Big Roof Top Beam (Short Side) (3) - 4
Big Roof Top Beam (Short Side) (5) - 4
L3
Short Side Left Roof Panel 3 - 2
Short Side Right Roof Panel 3 - 2
D3
E3
F3
G3
H3
I3
J3
K3
M3
N3
AA
BB
DD
FF
GG
JJ
CC
HH
KK










8MODEL NO. 088-2022-8 | PRODUCT NO. A102001100
PARTS LIST
-
Stake Φ8*180 - 8
Screw M10*80 - 8 + 1 Spare
Flat Washer M10 - 24 + 2 Spare
Flat Washer M8 -
Non-slip nuts M10 - 8 + 1 Spare
RR
M3 Drill -2
Bolt M6*35 -8 + 1 Spare
QQ
H090990002
H040050024
H090010017
Wrench M6 - 2
-
H040050025
H090010015
Wrench M10 - 2
H090030003
Allen Key M8 - 1






+ 1 Spare
+ 2 Spare

9
ASSEMBLY
Let us help you!
DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST!
1-888-670-6684
If you have questions regarding your product, require warranty
assistance, or have damaged or missing parts, please call our
cu
we’re here to help.
stomer service toll-free helpline. Contact us for assistance；
IMPORTANT:
Please read and understand this manual before any assembly. Before beginning
assembly of product, make sure all parts are present. Compare parts with packaging contents list. If any
part is missing, or if you have any questions, contact the service centre at 1-888-670-6684 (toll free).
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials and place them back into the box. Do not dispose of the packing materials until assembly
is complete. Read each step carefully before beginning any assembly and make sure you understand
each step. If you are missing a part, please call our toll-free number for assistance 1-888-670-6684.
Needed for assembly:（The following tools are not included）
5 people
Hammer Screwdriver Ladder
CAUTION!
Proper placement of your gazebo is essential.
Do not place the product underneath electrical lines.
Keep children away during assembly.
This product contains small parts which can be swallowed by children.
Keep fingers away from the places where they can be pinched or trapped.
Do not attempt to assemble the gazebo if any parts are missing.
When assembling wooden parts, do not overtorque the bolts to avoid splitting the wood.
See image illustration.
Use Level Square Assembly Tighten Bolts Measure Distance
This identifies information
that requires special attention.
Improper assembly could
lead to an unsafe or
dangerous condition.
Check that assembly is square
before tightening bolts.
Check that set or assembly is
properly level before proceeding.
Do not overtorque mounting bolts.
Over-tightening may cause the wood
to crack creating splinters and other
structural damage.
Cordless drill

10 MODEL NO. 088-2022-8 | PRODUCT NO. A102001100
ASSEMBLY
1
[
[

11
ASSEMBLY

12 MODEL NO. 088-2022-8 | PRODUCT NO. A102001100
ASSEMBLY
[
[
[
[
[

13
ASSEMBLY
[

14 MODEL NO. 088-2022-8 | PRODUCT NO. A102001100
ASSEMBLY
es
[
[

10

15
ASSEMBLY

16 MODEL NO. 088-2022-8 | PRODUCT NO. A102001100
ASSEMBLY

Do note that all 4 horizontal beams are to be horizontal and aligned (please see
Fig 1 that shows wrong alignment). At the 4 corners of the horizontal beams, we
have designed the beam when installed has a small gap to allow for expansion of
the wood.
While installing the horizontal beams & ensuring the consistency of the gap at all
four corners, it may be necessary to loosen the bolts, make the adjustment to
achieve a consistent gap at all 4 corners before tightening the bolts again.
Important notes:
1) Adjustment must be made prior to the installation of the roof &
2) Do not over torque the mounting bolts. Over torqueing the bolts will crush the
Cedar wood.
1 7
ASSEMBLY
Fig. 1 Fig. 2 Fig. 3

4x 4x
16x 16x
Assembly Tip:
We advise to measure the distance
between d1 & d2 to ensure that they
are equal in distance. In addition, best
to use a Bubble Level Gauge” to ensure
all the posts are upright.
d1=d2
Rt 90
18
MODEL NO. 088-2022-8 | PRODUCT NO. A102001100
ASSEMBLY

2x 2x
4x 4x
1 9
ASSEMBLY

20
MODEL NO. 088-2022-8 | PRODUCT NO. A102001100
ASSEMBLY