Canvas PELLY 188-0283-0 User manual

ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
PELLY
5-PIECE CHAT SET
PRODUCT NO. 188-0283-0
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.

To the trend seekers and design mavens,
CANVAS™ is the furniture and décor brand
that helps you imagine and create a space
you can be proud of.
That’s because CANVAS™
made for real life
and Canadian inspired.
at canadiantire.ca to tell us about your
using #myCANVASstyle.
CANVAS™ products

3 PELLY 5-PIECE CHAT SET
TABLE OF CONTENTS
TOOLSREQUIRED
Maximum Weight for Chair: 250 lb (113 kg)
Maximum Weight for Ottoman: 250 lb (113 kg)
Maximum Weight for Table: 55 lb (25 kg)
Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
Any assembly or maintenance of the product must be carried out by adults only.
Some parts may contain sharp edges. Wear protective gloves if necessary.
To prevent damage, place all parts on a level surface during assembly. Add a layer
of protective surface if needed.
Due to the nature of steel, surface oxidation (rusting) will occur if the protective
coating is scratched. This is a natural process. To minimize this condition, it is
recommended that care be taken when assembling and handling the product in
order to prevent the paint from being scratched.
For easy assembly, do not completely tighten bolts into the frame until all bolts
have been inserted for that phase of assembly. Only at the final step of assembly,
securely tighten all bolts and hardware.
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND USING THE PRODUCT.
Parts List
Caring for Your Item
Warranty
Step-by-Step Guide
4
Before You Begin Assembly 6
7
13
14

4
PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
1Seat Frame 2
2Front Leg (Left) 2
3Front Leg (Right) 2
4Back Leg 4
5Back Cushion 2
6Seat Cushion 2
7Table Top 1
8Table Leg 4
9Ottoman Frame 2
10 Ottoman Leg 8
11 Ottoman Seat Cushion 2
L
R
PELLY 5-PIECE CHAT SET

5
EXPANDED VIEW
1
2
3
4
5
6
7
8
9
10
11
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
AM6x20 Combination Bolt
and Washer 60
BHex Key 1
PELLY 5-PIECE CHAT SET

6
BEFORE YOU BEGIN ASSEMBLY
?
REMOVE PACKAGING MATERIALS
Place packing materials back in the box. Do not dispose of
packaging materials until assembly is complete.
READ EACH STEP CAREFULLY
Make sure you understand each step. If you have any questions,
contact CANVAS™ customer service at 1-888-670-6684 (toll-free).
ASSEMBLE IN A CLEARED AREA
Place all parts from the box on the floor in front of you on a clean,
dry, level surface to protect the product as it is being built.
PELLY 5-PIECE CHAT SET

7
1
A
A
2
3
4
STEP-BY-STEP GUIDE
Place the seat frame 1 on a soft, flat surface as shown.
Line up the bolt hole on the seat frame 1with the corresponding bolt hole on the
front legs 2, 3and back legs 4.
Insert M6x20 combination bolt and washer Aand lightly tighten the bolts using
the hex key B.
Do not completely tighten until all assembly is completed.
1X1 2X1
STEP 1
3X1 4X2 AX12 BX1
LR
PELLY 5-PIECE CHAT SET

8
5X1 6X1
1
5
6
STEP-BY-STEP GUIDE
Ensure all bolts are securely tightened by using the hex key B; turn the chair to the
upright position.
Place the seat cushion 6and back cushion 5onto the chair as shown.
BX1
STEP 2
PELLY 5-PIECE CHAT SET
NOTE :
Repeat steps 1 and 2 to assemble the second chair.

9
STEP-BY-STEP GUIDE
Place the table top 7 upside down on a soft, flat surface.
Attach the table legs 8to the table top 7by lining up the bolt holes on the table
top 7with the corresponding bolt holes on the table leg 8.
Using M6x20 combination bolt and washer Aas shown, lightly tighten all bolts
using the hex key B.
Do not completely tighten until all assembly is completed.
7X1 8X4
STEP 3
AX12 BX1
A
8
7
PELLY 5-PIECE CHAT SET

10
STEP-BY-STEP GUIDE
BX1
Ensure all bolts are securely tightened by using hex key B; turn the table to the
upright position.
Your table is now ready to use.
STEP 4
PELLY 5-PIECE CHAT SET

11
STEP-BY-STEP GUIDE
Place the ottoman frame 9 on a soft, flat surface.
Attach the ottoman legs 10 to the ottoman frame 9by lining up the bolt holes on
the ottoman frame 9with the corresponding bolt holes on the ottoman legs 10.
Insert M6x20 combination bolt and washer Aand lightly tighten the bolts using
the hex key B.
Do not completely tighten until all assembly is completed.
9X1 10 X4
STEP 5
AX12 BX1
A
9
10
PELLY 5-PIECE CHAT SET

12
STEP-BY-STEP GUIDE
Ensure all bolts are securely tightened by using the hex key B; turn the ottoman to
the upright position.
Place the ottoman seat cushion 11 onto the ottoman frame 9, pull the button up
from the support bar under the ottoman seat, then attach to the small loop on the
side of ottoman seat cushion 11 as shown.
STEP 6
BX1 11 X1
9
11
PELLY 5-PIECE CHAT SET
NOTE :
Repeat steps 5 and 6 to assemble the second ottoman.
NOTE :
Repeat steps 5 and 6 to assemble the second ottoman.

CARINGFOR YOUR ITEM
13
1
2
3
4
Check all bolts periodically for tightness. When required, tighten them again.
Always keep children under close supervision while they are using or around
this product. Never leave children unattended.
Do not light any fires below or near the product.
We recommend the use of furniture covers when not in use.
- Wash frame parts with mild soap and water, rinse thoroughly, and dry completely.
Do not use bleach, acid, or other solvents on the frame parts.
- The cushions may be washed on the surface only by using mild soap and water.
If washed, rinse well and hang to dry Do not machine wash or dry.
CLEANING:
To wash fabric and frame parts:
Do not use bleach, acid, or other abrasive cleaners on the fabric or frame parts.
Steel components of garden accessories and furniture are treated with
rust-inhibiting paint. However, due to the nature of steel, surface oxidation
(rusting) will occur if this protective coating is scratched. This is a natural
process. To minimize this condition, it is recommended that care be taken when
assembling and handling the product in order to prevent the paint
from being scratched. Surface rust can be removed easily using very light
application of common cooking oil. If surface oxidation (rusting) occurs
and no measures are taken to correct it, the oxidation may start dripping
onto the assembly surface, which may cause damaging stains that may be
difficult to remove.
OFF SEASON:
Clean and drybefore storing inadry, sheltered area.
5This product is intended for domestic outdoor use only.
PELLY 5-PIECE CHAT SET

PELLY 5-PIECE CHAT SET 14
WARRANTY INFORMATION
This CANVASTM product carries a one (1) year warranty against defects in workmanship and
materials. Trileaf Distribution agrees to replace the defective product free of charge within the
stated warranty period, when returned by the original purchaser with proof of purchase. This
product is not guaranteed against wear or breakage due to misuse and/or abuse.
Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
1-YEAR LIMITED WARRANTY
PRODUCT NO. 188-0283-0
1
YEAR
ANNÉE

INSTRUCTIONS D’ASSEMBLAGE
VOUS RENCONTREZ DES PROBLÈMES?
NUMÉRO SANS FRAIS :
ENSEMBLE DE
DÉTENTE, 5 PIÈCES
PELLY
Nº DE MODÈLE 188-0283-0
IMPORTANT : Veuillez lire attentivement ce guide avant de procéder
à l’assemblage de ce produit.
Conservez ce guide à titre de référence.

C’est parce que CANVASMC offre un style facile
avec des produits qui sont faits pour
la vie réelle et d’inspiration canadienne.
Nous serions ravis de connaître votre opinion
et nous vous invitons à nous faire part
de vos commentaires. Visitez notre site Web
à l’adresse canadiantire.ca pour nous faire
part de votre expérience et partagez vos
photos en utilisant le mot-clic #MonStyleCANVAS.
Montrez-nous comment vous donnez vie
aux produits CANVASMC. Nous avons hâte de les voir!
D'INSPIRATION CANADIENNE
Pour les chercheurs de tendances et
les experts en design, CANVASMC est la
marque de meubles et de décoration qui
vous aide à imaginer et à créer un
espace dont vous pouvez être fier.

OUTILS REQUIS
Poids maximum pour fauteuil : 250 lb (113 kg)
Poids maximum pour pouf : 250 lb (113 kg)
Veuillez lire et comprendre l’intégralité de ce guide d’utilisation avant de tenter
d’assembler, d’utiliser ou d’installer le produit.
L’assemblage et l’entretien de cet article ne doivent être effectués que par
des adultes.
Certaines pièces peuvent contenir des bords tranchants. Portez des gants de
protection si nécessaire.
Pour éviter tout dommage, placez toutes les pièces sur une surface plane
pendant l’assemblage. Ajoutez une surface de protection, le cas échéant.
AVERTISSEMENT! VEUILLEZ LIRE LES CONSIGNES DE SÉCURITÉ
SUIVANTES AVANT D’ASSEMBLER ET D’UTILISER L’ARTICLE
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES GRAVES.
Poids maximum pour table : 55 lb (25 kg)
En raison de la nature de l’acier, des rayures sur le revêtement de protection
pourraient entraîner l’oxydation de la surface (rouille). Ceci est un processus
naturel. Afin de minimiser cette condition, il est recommandé d’assembler et
de manipuler l’article soigneusement afin d’éviter de griffer la peinture.
Pour faciliter l’assemblage, ne serrez pas complètement les boulons dans le
cadre tant que tous les boulons n’ont pas été insérés pour cette étape de montage.
Serrez tous les boulons et les autres éléments de fixation seulement à la fin
de l’assemblage.
TABLE DES MATIÈRES
4
Liste des pièces
Avant de commencer l’assemblage
Guide étape par étape
Entretien de votre article
Garantie
6
7
13
14
2 personnes

4
LISTE DES PIÈCES
RÉFÉRENCE DESCRIPTION ILLUSTRATION QUANTITÉ
1Cadre de siège 2
2Patte avant (gauche) 2
3Patte avant (droite) 2
4Patte arrière 4
5Coussin de dossier 2
6Coussin de siège 2
7Dessus de table 1
8Patte de table 4
9Cadre du pouf 2
10 Patte de pouf 8
11 Coussin de siège du pouf 2
G
D
ENSEMBLE DE DÉTENTE, 5 PIÈCES PELLY

5
VUE ÉCLATÉE
1
2
3
4
5
6
7
8
9
10
11
LISTE DE LA QUINCAILLERIE
RÉFÉRENCE DESCRIPTION ILLUSTRATION QUANTITÉ
ABoulon avec rondelle
M6x20 60
BClé hexagonale 1
ENSEMBLE DE DÉTENTE, 5 PIÈCES PELLY