Canyon Sammy CNE-KW21 User manual

Kids watch
Sammy
Quick Guide v 1.1
CNE-KW21

EN
Please read the instruction manual carefully
before you use this smartwatch so that the
correct installation is made to enable quick use
of this device.
1. Preparation before using.
1.1 Check that all the accessories are included.
1.2 Choose the Micro-SIM card which matches your
GSM network, as recommended by your dealer
(Turn the watch off before you insert the Micro-SIM
card).
1.3. Open cover on the back and remove the battery
to insert SIM-card into the SIM-card slot. Then close
the cover and turn on your device.
1.4 Install the app on the phone, you can ask the
dealer if you don’t know how to download it.
1.5. Register the device by entering the registration
code while adding GSM device in APP. You can scan
the QR code, by selecting from the menu “Device
info - Registration code”, or from the sticker on the
watch «Reg code».
2. Product functions:
Phone book
Talk-back function
Alarm clock
SOS emergency alarm
Low-power alarm
Remote shutdown

EN
Backlight
Game function
Camera
Photo album
Location system: LBS
Safe area monitoring function
3. Watch introduction
Reset: reset key, need to connect power supply
afterwards.
Light switch: press two times briey to turn on the
light, press briey again to turn off the light.
Back
Answer call
Power key
Sos
Reset
key
Answer call
Light switch
Charging
port

EN
4. Screen display and functions
4.1 Do Not Disturb mode: provides the ability to
congure the time period during which the watch will
be blocked and prohibits the use of incoming/outgoing
1
5
9
13
2
6
10
3
7
11
4
8
12

EN
calls and from making sounds.
4.2 Dial-up: The dial-up function provides the ability
to make calls directly from the phonebook of the watch
as well as to arbitrary numbers using the regular
watch dialer.
4.3 Device information: app download code,
registration code.
5. Using the watch notication function:
Click the «notication» button in app to can see a
list of notications from the watch (SOS-calls and
notications of low battery + notication of crossing
geofence borders).
6. Explanation of the watch working mode:
There are 3 basic working modes: normal mode,
power saving mode and follow-up mode. Each is
a different working mode with different uploading
interval.
normal mode: uploading interval are 10 minutes,
power saving mode: uploading interval is 1 hour
follow-up mode: uploading interval is 1 minute.
7. Watch SOS
Long press SOS key for 3 seconds. It will display the
SOS screen.
Watch will be on “alert state”.
Loop dialing 3 SOS numbers for two times. It will stop
when the call is answered. If no answer, it will continue

EN
dialing for two times.
At the same time the watch can send a message to
main phone number (default “off”), and at the same
time send alert message to the app
8. Low power alert
The watch battery appears in percentage format.
When under 20%, it can send an alert message to the
selected phone number (default “off”), and at the same
time send alert message to the app.
9. Voice chat
Click the Talk, then can long press to chat within the
app.
10. Voice monitor
To use the voice monitoring function in the app, you
need to set a phone number to which you can request
a quiet callback from the watch, this call will not be
displayed on the watch and will not transmit sound to
the watch from the incoming call, only outgoing sound
will be transmitted as in a 1 way call.
11. Turn Off
Press OFF key to power off if no sim-card installed, or
remote turn off from the app.
12. Phone Book
10 phone numbers can be set in watch phonebook.
The phone numbers can be dialled from the watch for
normal two-way calling. Click to enter phone book,

EN
then select phone number by pressing left or right
arrows, nally briey click on the number to dial.
TROUBLE SHOOTING
If the watch can not connect with the server at the rst
time of use, and the device shows no network, please
check as following:
1.Check you have inserted the Micro-Sim card
correctly, as is shown on the label on the watch
screen.
2.Please check that the Micro-Sim card is activated
there is available credit and that the Internet is
working (before inserting it into the watch).
3.Make sure that the registration code is entered or
you can scan the QR code, by selecting from the
menu “Device info - Registration code”, or from the
sticker on the watch «Reg code».
4.There are two situations if you can not register on
the APP.
a.The wrong code is entered, please re-enter
carefully.
b.The watch is registered with another user, ask him/
her to give you access through the watch menu in
the application.

EN
If the actions from above-mentioned list do not help,
please contact support service at Canyon web-site:
http://canyon.eu/ask-your-question/
Download extended functional guide by the link:
https://canyon.eu/les/manuals/quickquides/
smartwatches/functional-guide.pdf
Scan this QR code to
download and install the
application Canyon Life:
Safety Instructions
Read and follow all instructions before
usage of this device.
1. Protect the device from heat: do not
install heating devices near it, and do not expose to
direct sunlight during hot season for a long time.
Warning! Protect the device from water: do not use
the device in water. This will lead to device damage.

EN
Warranty liabilities
Warranty period starts from the date of the device’s
purchase from the Seller, authorized by Canyon. The
date of purchase is indicated in your sales receipt or a
waybill. During warranty period, a repair, replacement
or refund of payment for goods are performed on
discretion.
Manufacturer: Asbisc Enterprises PLC, 43, Diamond
Court, Kolonakiou Str, 4303, Limassol, Cyprus, Agios
Athanasios, http://canyon.eu/

BG
Моля, прочетете внимателно ръководството
за експлоатация, преди да използвате този
смарт часовник. така че да бъде направена
правилната инсталаци
1. Подготовка преди употреба.
1.1 Проверете дали всички аксесоари са включени.
1.2 Изберете Micro-SIM картата, която съответства
на вашата GSM мрежа, както е препоръчано от
вашия търговец (Изключете часовника, преди да
поставите Micro-SIM картата).
1.3 Отворете капачето на гърба и извадете
батерията, за да поставите карта в слота за SIM-
карта. След това затворете капака и включете
устройството си.
1.4 Инсталирайте приложението на Вашия
смартфон., Можете да попитате Вашия търговец,
ако не знаете как да го изтеглите.
1.5 Регистрирайте устройството, като въведете
регистрационния код, докато добавяте GSM
устройство в APP. Можете да сканирате QR
кода, като изберете от менюто „Информация за
устройството - Регистрационен код” или от стикера
на часовника «Reg code».
2. Функции на продукта:
Телефонен указател
Обаждания
Алармен часовник
SOS бутон
Аларма за изтощена батерия
Дистанционно изключване