Car Solutions PCM5.0 User manual

Installation Manual
Multimedia Interface for Porsche PCM5.0
car-solutions.com
[email protected]
car-solutions.com

Compatibility: Porsche PCM5.0
Components: Interface Main *1
Interface Input / Output specification:
Input:LVDS IN (Car System) *1
HDMI *1
Analog RGB *1
AV *2
CVBS(Front Camera) *1
CVBS(Rear Camera) *1
Output:LVDS OUT (Car System) *1
AUX OUT *1
Power Spec:
Input Power: 8VDC ~ 18VDC
Consumption: 5WATT
Switch input mode:
1. External video sources skip function: Able to control input videos on and off
via Dip switches
2. Able to switch videos via the remote and button switch
3. Able to detect the rear view camera by CAN
2
car-solutions.com
[email protected]
car-solutions.com

3
MAIN BOARD
QCPASS1415
AV CABLE
HAVCAB0056
MULTI CABLE
HARETC0240
REMOTE CONTROL
REMOTE0001
RGB CABLE
HRGBCA0013
BUTTON CABLE
HARETC0001
IR CABLE
HIRCAB0002
LCD CABLE
HLCDCA0017
POWER CABLE
HPOWER0225
CAN J BY J
HARETC0288
car-solutions.com
[email protected]
car-solutions.com

4
ON: DOWN / OFF: UP
* Please make sure to disconnect the power cable
of interface and reconnect to apply dip switch
setting whenever changing DIP switch.
PIN FUNCTION Dip S/W SELECT
1 RGB
OFF : RGB MODE
ON : RGB MODE SKIP
2 HDMI
OFF : HDMI MODE
ON : HDMI MODE SKIP
3 AV1
OFF : AV1 MODE
ON : AV1 MODE SKIP
4 AV2
OFF : AV2 MODE
ON : AV2 MODE SKIP
5 FRONT CAMERA
OFF : Ext. FRONT CAMERA MODE
ON : OEM FRONT CAMERA MODE
6 CAR MODEL
OFF : Without OEM REAR CAMERA
ON : With OEM REAR CAMERA
7 REAR CAMERA
OFF : OEM REAR CAMERA MODE
ON : Ext. REAR CAMERA MODE
8 CAN IN/OUT
OFF : CAN Data In/Out Mode
ON : CAN Data Bypass Mode
car-solutions.com
[email protected]
car-solutions.com

5
Key FUNCTION
POWER & PIP N/C
MENU Activating OSD menu
OK Making a selection, changing image display
▲Moving upward
▼Moving downward
◀
Moving leftward
(If you press this button 2 seconds long, you can access the
factory mode)
▶
Moving rightward
(If you press this button 2 seconds long, you can reset all the
data about user environment)
car-solutions.com
[email protected]
car-solutions.com

IMAGE
PARK
UTIL1
UTIL2
INFO
H-POSITION
V-POSITION
Menu of FACTORY
MENU to Return SEL to Select/Save
IMAGE
PARK
UTIL1
UTIL2
INFO
PAS TYPE
PAS SETUP
REAR TYPE
RADAR ENABLE
Menu of FACTORY
MENU to Return SEL to Select/Save
6
IMAGE
H-POSITION/V-POSITION Setting
PARK
PAS TYPE: Select parking line type
NOT USED: Do not use parking line
PAS ON: Use Flexible Parking Lines
PAS OFF: Use fixed parking line
PAS SETUP:
You can move the position of parking line.
REAR TYPE: Choose rear camera recognition.
CAN: Detecting the rear view camera by CAN signal. (Installer must connect
“CAN” cable of the power cable to the “CAN” cable of the car)
LAMP: Detecting the rear view camera via “Grey Rear” wire. (Installer must
connect “Rear-C” cable of the power cable to the rear lamp of the car)
RADAR ENABLE:
Setting up parking distance alarm sensor (ON/OFF)
car-solutions.com
[email protected]
car-solutions.com

IMAGE
PARK
UTIL1
UTIL2
INFO
NAVI MODEL
AVOUT SELECT
FCAM TIME
FACTORY RESET
Menu of FACTORY
MENU to Return SEL to Select/Save
IMAGE
PARK
UTIL1
UTIL2
INFO
REMOTE SELECT
IR MEMORY
HANDLE KEY
Menu of FACTORY
MENU to Return SEL to Select/Save
7
IMAGE
PARK
UTIL1
UTIL2
INFO
SYSTEM VERSION
(MAIN -180719)
(MCU : P1.8.08.16
Menu of FACTORY
MENU to Return SEL to Select/Save
UTIL1
NAVI/HDMI MODEL: Android, car-play, navigation
model setting
AVOUT SELECT:
Select background sound through car AUX
F-CAM TIME :
Time setting for the front camera display
(OFF, 3s, 5s, 10s, 15s)
FACTORY RESET: Factory mode reset (YES/NO)
INFO
System version information
UTIL2
REMOTE SELECT:
Able to remote control on DVD, DTV by
selecting “USER” after IR memory registered
IR MEMORY:
Register IR memory (Remote Control Value)
of DVD, DTV
HANDLE KEY: OEM button to change the mode
car-solutions.com
[email protected]
car-solutions.com

8
1. Please disconnect OEM connector in red
circle on OEM head-unit bunch connector.
2. Connect supplied CAN cable as above.
OEM Cable
OEM
Monitor
OEM
Command
OEM LCD cable Supplied LCD cable
Supplied
Power/CAN J by J
OEM HU
connector
Android
Navigation
AV in *2
Rear camera in *1
Front camera in *1
Aux out *1
Video out *2
CARPLAY
BOX
RGB Pin#7 is
UART-TX for
UART Touch
car-solutions.com
[email protected]
car-solutions.com

9
* Press high lighted OEM button for 3 seconds long to mode switch
car-solutions.com
[email protected]
car-solutions.com

10
MACAN
* Press high lighted OEM button for 3 seconds long to mode switch
car-solutions.com
[email protected]
car-solutions.com

Q. I cannot change mode
A. Check connection of Ground cable and IR Cable. Check LED lamp is on, if not
check connection of POWER cable.
Q. All I got on the screen is black.
A. Check second LED lamp of the interface is on, if not, check A/V sources
connected are working well. (Second lamp indicates AV sources connected works
well) Check interface connection has been done well.
Q. Displayed image color is not proper (too dark or unsuitable color)
A. Press ▶ button on the remote control for 2 seconds and check how it goes, if it
does not work, inform to manufacturer.
Q. I cannot watch the rear camera on the screen
A. Set the DIP switch #7 as state “ON”.
Q. Set mode not appear
A. Check DIP Switch.
Q. OEM image is not displayed.
A. Check interface’s LCD In/Out cable connection. If the status keeps on, inform to
manufacturer.
Q. Screen only displays white color.
A. Check LCD out cable is connected well, if this status keeps, inform to
manufacturer.
Q. If no image is shown on screen after connecting CAN wire with Park gear.
A. Go on the “FACTORY MODE”, check “UTIL-Rear Select”. If “LAMP”, change the
setting as “CAN” with the remote control. ( ※ when connecting Rear-C wire of LAMP
power cable to Backup lights, Setting should be like this / CAN : if controlling rear
camera with CAN wire)
11
car-solutions.com
[email protected]
car-solutions.com