CareCo MS09132 User manual

CareCo UK Limited , Hubert Road, Brentwood, Essex, CM14 4JE | 0333 015 5000
PRODUCT CODE: MS09132
The Handy Half Step is designed to make
large steps easier to climb for someone who is
unsteady on their feet. Please ensure the step
is installed correctly and securely before use.
The Handy
Half Step
INSTALLATION
Attaching the feet
Screw the feet (1) into the
corners of your Handy Half
Step.
If needed, use the leg
extenders (2) provided to add
extra height to your step.
To ne tune the height and level
of the Handy Half Step, use the
spanner provided and adjust
the top nut on the legs (3).
Tip – use the level tool (4) to
help ensure all the legs are the
same height.
1
2
3
4

Warranty: 12 months
Maintenance
Wipe down with a non abrasive cloth
and soapy water.
Security Fixing Kit
1. Fit the angled bar (B) onto the foot, screw
the nut (C) tightly against it.
2. Ret the feet to the step ensuring the nut
(A) is tight against the Step, or base of the
Extending Leg (if using).
B
A
C
INSTALLATION
Attaching the
handrails
To attach the handrails,
remove the locking blocks
from the Handy Half Step
by unscrewing the screws
on the top of the step (5)
and removing the locking
block (6).
Place the handrails in the
holes (7) and insert the
screws into the bottom
of the handrails (8).
Reinsert the locking blocks
and tighten the screws
from the top of the half step.
56
78
Before use, check that the Handy Half Step is secure and when using it make sure to
step in the centre to avoid stepping on the corners or edge of the step. Ensure the
long side of the step is pushed against a solid surface.
CareCo UK Limited , Hubert Road, Brentwood, Essex, CM14 4JE | 0333 015 5000
MAX USER WEIGHT: 220kg
Kg