Carrier RMAP-ST User manual

4
2
An integrated filter is included in new product.
How to replace the filter
Hold the top cover of the product
with both hands and pull upwards.
Grasp the filter cover hole on the rear
filter cover and pull it forward.
filter cover
hole
• Remove the plastic packaging from the filter before use.
• Keep plastic packaging away from children as it may cause suffocation.
• Be sure to unplug the unit before removing the filter packaging.
CAUTION
You can not return the filter once the plastic packaging is removed.
NOTE
Push the filter into the top and bottom
part of the product with the filter in
close contact.
Remove the plastic packaging from
the filter.
3
1
Filter Replacement Guide
CARRIER ROOM
AIR PURIFIER

carrierathome.com 1-888-320-0909
©2020 Carrier. All rights reserved.
Manufacturer reserves the right to discontinue, or change at any time, specifications or
designs without notice or without incurring obligations. Third-party trademarks and
logos are the property of their respective owners.
7
6
5
01-811-20536-01
Hold the top cover of the product with
both hands and slide it back in place,
making sure the logo appears in the
front.
Sleep
Replace filter cover.
► Insert the cover into the fixed
groove at the bottom of the product
first.
► Slide the cover forward so that the
cover fits into the top grooves.
When the filter installation is complete,
press the + " " button on the
control panel for 5 seconds or more
to initialize it.
► Red filter light will go off when
product is reset.
Auto
Fixed Groove
at bottom
Cover Positioning Groove
at top
Cleaning the filter
If the filter is very dirty, replace it.
► Filter contamination may vary depending on your environment.
The timing of filter cleaning may vary accordingly.
1
2In between filter replacements, clean the pre-filter with a vacuum
cleaner or a soft brush.
► Never wash the filter with water.