Carromco 752.69 User manual

Quality Family Games
Model 752.69
Basketball Instructions
Visit www.carrom.com to register your product to receive the latest product
updates, special offers, and other product related information.
Product Registration
752.69 08/14/14

Part List for Duel Basketball Game
Pipe 1
2 Pieces Pipe 8
2 Pieces
#1 #8 #14
Support Bar
1 Piece
#2
Pipe 2
2 Pieces
#3
Pipe 3
2 Pieces
#4
Pipe 4
1 Piece
#5
Pipe 5
1 Piece
#6
Pipe 6
2 Pieces
#7
Pipe 7
2 Pieces
#9
Pipe 9
1 Piece
#10
Pipe 10
2 Pieces
#11
Pipe 11
2 Pieces
Hinge 12
2 Pieces
#12
#13
Pipe 13
1 Piece
#15
J Hook
2 Pieces
#16
Chute
1 Piece
#17
Backboard
1 Piece
#18
Hoop with Net
2 Pieces
#19
Support Plate
2 Pieces
1

#20
60mm Bolt
2 Pieces
#21
Electronic Scorer
1 Piece
#22
Basketballs
6 Pieces
#23
Pump
1 Piece
#24
35mm Bolt
14 Pieces
#25
20mm x 5mm Bolt
4 Pieces
#26
20mm x 6mm Bolt
8 Pieces
#27
45mm Bolt
4 Pieces
#28
40mm Bolt
2 Pieces
#29
1/8” x 3/4” Screw
8 Pieces
#30
Flat Washer
30 Pieces
#31
Lock Nut 31
30 Pieces
#32
Lock Nut 32
4 Pieces
#33
Wrench
1 Piece
#34
“L” Wrench
1 Piece
#35
Power Pack
1 Piece
#36
Plastic Foam Block
1 Piece
2
Part List Continued

31
30
30
2
24
3
24
2
20
30
31
9
4
6
8
7
7
68
9
3
Step 1
Connect pipes #4 with #3 on each side -
push buttons should lock. Connect pipes
#6 and #3 using bolts #24, washer #30,
and lock nuts #31. Connect pipes #8 and
#9 together. Connect pipes #6 and #9
using bolts #20, washer #30, and lock nuts
#31. Add pipe #2 to pipe #3 (push button
lock), then connect pipe #7 and pipe #8
(push button lock). Connect pipes #7 and
#2 using bolts #24, washer #30, and lock
nuts #31. Repeat on other side of game.
3

4
Step 2
Attach pipes #10 into bracket of pipe #6
(use end of tube with two holes close to
end and bolt into hole at very end) using
bolt #28, washer #30, and lock nut #31.
Attach pipe #11 to other end of pipe #10
using bolt #24, washer #30, and lock nut
#31. Attach hinge #12, with hinge folding
upward, to pipes #10 and #11 using
bolt #24, washer #30, and lock nut #31.
Hinges should attach to outside edge of
game. Repeat on other side of the game.
6
10
12
11
11
12
10
31
24
30
28
30
31
19
17
18
26
Step 3
Attach the rims #18 to the front
of the backboard using bolts #26,
support plates #19, washers #30,
and lock nuts #31 as shown.
Assemble nets to rims.

5
Step 4
Connect pipes #5 and #2 using bolt #24,
washer #30, and lock nut #31. Slide pipes
#1 and #2 together. Attach the backboard
#17 to pipes #1 and #2 using bolt #27,
washer #30, and lock nut #31 through the
two top holes on backboard. Attach
J hook #15 and backboard together using
bolt #27, washer #30, and lock nut #31 in
bottom holes.
1
17
2
3
4
4
3
31
27
5
2
24
30 30
15
31
1

6
Step 5
Attach electronic scorer #21 to the back of
the back of backboard #17 using bolt #25
and lock nut #32. Screw the sensors into
the back of the backboard using
screws #29. Make sure the sensors with
the “Top” sticker go in the top hole and the
sensors with the “Bottom” sticker go in the
bottom hole.
29
17
25
21
32
“Bottom”
(Red Wire)
“Top”
(Gray Wire)
“Top”
(White Wire)
“Bottom”
(Black Wire)
Step 6b
Slide the end of chute #16 over pipe #13
as shown in the diagram below.
16
13
Step 6a
Remove two-sided tape from back of
plastic foam block #37 and attach to back
of backboard above scoring unit. See
diagram on foam block.

7
Step 7
Attach the ends of pipe #13 to both ends of
pipe #11 as shown below. Afx the chute
to the other end of the game near the
backboard as shown in the inset drawings.
Attach velcro strap from chute around pipe
#13.
1
16
13
14
11
2
15

31
24
14
8
Step 8
Attach the support bar #14 over the chute
and on outside end of pipe #13 using
bolts #24, washer #30, and lock nuts #31
as shown below.

To secure the unit upright when not in
use, simply fold the unit up by folding
the hinge #12, lift up bar #10, secure
clevis pin lock by inserting the pin into
the bracket hole then through the second
hole on the pipe and then through the
bracket hole.
9

Power Pack Connection
2. Plug the power pack into the wall outlet.
Power Pack Safety
Keep liquids
away from the
power pack.
Should it get
wet, do not
touch it. Turn
off the power at
a wall switch or
fuse box before
removing the plug from the
outlet.
Unplug the
power pack
when not in
use. Always
grasp the power
pack at the
outlet. Do not
pull the cord to
remove the plug from the wall
outlet.
Make sure the
power cord
does not cross
an area where
someone could
trip over it. Be
sure there’s
enough slack in
the cord when
it’s connected to the outlet and
the power pack.
Basketball Use and Care
10
Take #23 pump and remove needle from needle
storage compartment in base of handle. Attach to
end of pump. Moisten needle before inserting in
basketball. Pump up to desired size. Put needle
back in storage compartment when done.
1. Plug the power pack cord into the scoring unit.

Instructions
The object of the game is to score the most points in each round. The electronic scoring unit will keep time. As
the balls are shot towards the basket they will roll back to the shooter in the chute. Keep shooting the balls until
the 30 second clock reaches zero (sound effects will indicate end of round).
To Play:
Turn the power on by plugging in the power pack.
Once either player makes the rst shot, the time will begin to count down.
Baskets count as 2 points during the rst 20 seconds and 3 points during the last 10 seconds.
If either player reaches 30 points during the rst round, there is a 15 second extension.
An additional 10 seconds is added if either player reaches 90 points before the extension expires. All baskets
during the extension times are worth 3 points each.
After the game ends, the display will show both players scores for 5 seconds.
Auto Shut Off Mode
The unit will turn off after 5 minutes of inactivity. Press the reset button to restart the game.
Important Notes
The unit must be unplugged after using to prolong the life of the infrared detector. This game is intended for
indoor use only. Sensors may not operate properly if used outdoors.
NOTICE:
THIS GAME IS INTENDED FOR HOME USE ONLY.
ANY COMMERCIAL OR INSTITUTIONAL USE WILL VOID THIS WARRANTY
THIS PRODUCT IS INTENDED FOR USE BY OR UNDER THE SUPERVISION OF ADULTS.
Limited Warranty
• Carrom Company warrants all games to be free from defect in material and workmanship for a period
of ninety (90) days from the dates of original purchase. Should any defects in material or workmanship
appear during that warranty period, the components will be repaired or replaced at Carrom location
• This warranty doesn’t include damage due to misuse, vandalism, shipping, or incorrect assembly of
components.
• This warranty give you specic right and you may also have other rights, which vary from state to state.
• Please le your claim to the customer service department at the address below. You must include the
following:
1. Proof of purchase.
2. Faulty components with detailed explanation of the problem.
3. Your return address and daytime phone number.
Carrom Company
Attn: Customer Service
218 E. Dowland St.
PO Box 649
Ludington, MI 49431
[phone] ext. 232
[phone] fax
[phone] toll free
[email protected]
www.carrom.com