Carson MicroFlip MP-250 User manual

CARSON ®
MicroFlipTM
100-250x LED UV Lighted Pocket Microscope
Congratulations on selecting your new LED UV Lighted Pocket Microscope!
In order to achieve optimum performance, please follow instructions for proper use and care.
PRODUCT SPECIFICATION
Magnification: 100-250x Battery: 1 AA
Weight: 0.18 lbs Accessories: Smartphone Clip, 1 Blank Slide with
Coverslip and Wrist Strap
Dimensions: 1.5" x 1.0" x 5.5"
MP-250 DIAGRAM
1
LEFT SIDE
-
Focusing ring
0
RIGHT SIDE
--.---- UV light switch
fl. ,~r--- Zooming dial
--++--,,-------;---- Battery door
Front Facing LED
ry%~~~~f----Objective lens
UV light
Downward
Facing
LED
MP-250

INSTALLING THE BATTERY
Slide battery door open. Insert 1 AA alkaline battery
and replace battery door.
ADJUSTING ZOOM & FOCUS
..__.,
...
..
Insert a prepared slide into the
Press the LED switch slot between the objective lens
for light. and the base plate.
Flip base plate down to sit underneath
the objective lens.
Please note, when base plate is down
only downard facing LED will illuminate.
2
Press the LED switch Base plate should be in upright Place the viewing
for light. position (behind battery door.) object directly below
the objective lens.
Please note, when base plate is
in upright position only front facing
LED will illuminate.
WARNING: Do not look
directly at LED light.
Adjust zooming dial Rotate focusing ring
for desired level of until the image is
magnification. clear and sharp.
USING MICROSCOPE TO VIEW OBJECTS DIRECTLY
USING MICROSCOPE TO VIEW SPECIMEN SLIDE
WARNING: Use only alkaline battery. Keep away from fire or
excessive heat.Inspect battery for corrosion or leakage.
Insert in direction indicated. Rechargeable battery not
recommended.

UV LIGHT:
WARNING: Do not look
directly at UV light.
CARE
Clean using microfiber lens cloth.Do not use
any abrasives, chemical cleaners, or solvents.
USING ADAPTER CLIP
MULTIPLE CAMERA PHONES:
If there is more than one rear facing
camera, use the primary one.Typically,
the primary is a 1x wide-angle color
camera and the other camera(s) are
secondary.
For the latest instructions on multiple
camera phones, please visit
www.carson.com/multicam
Attach the adapter clip to the
top of the microscope and turn
on camera.
If viewing image is not centered
or is not a complete round
image, adjust adapter clip
making sure it is centered over
camera.
Note: Always hold the phone
securely during use. If you
release the phone while it is
attached to the microscope it
can fall and damage the phone.
=
To maximize your image,
pinch screen to enlarge.
For best results, use in
video mode.
3
~
Customer Service:
If you experience any difficulties, please contact us and we will be happy to help you.
inf[email protected] uksuppor[email protected] eusuppor[email protected]
For warranty information, visit www.carson.com/warranty
www.carson.com
Carson Optical 2070 5th Avenue, Ronkonkoma, NY 11779 | Tel: [phone]
Some subjects may have enhanced resolution
when using the UV light.
Press and hold the UV light switch to activate
the UV light.
Please note, the UV light is deactivated when
the base plate is flipped down to the base of
the microscope.
Align the camera of the phone to
the center of the circular hole of
the adapter clip.