CAS Scale ND 300 User manual

2

3
PRECAUTIONS................................................4
PREFACE..............................................................6
NAMESAND FUNCTIONS.....................6
INSTALLATIONS...........................................8
OPERATIONS..................................................11
1. General Weighing...........................................11
2. Weighing with Tare........................................11
ERROR MESSAGE......................................13
SPECIFICATIONS........................................13
CONTENTS

4
PRECAUTIONS

5
PRECAUTIONS

6
PREFACE
Thank you for purchasing our CAS ND-300 Series.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your specialty departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have reliability.
This manual will help you with proper operation and care of the ND-300 Series.
Please keep this handy for future reference.
NAMES AND FUNCTIONS
OVERALL VIEW
PREFACE & NAMESAND FUNCTIONS

7
DISPLAYAND KEYBOARD
■ND-300
■ND-300E, ND-300H
■KEY FUNCTIONS
KEYS FUNCTIONS
Used to correct the zero point.
Used to enter a tare weight.
Used to cancel a tare weight.
Whenthe weight is not stable,the display showstheaverageweight.
Turnson or offthedisplay.
PREFACE & NAMESAND FUNCTIONS

8
ND-300
1.Fix with bolts andnuts after insertingthe load
cellcableto support pole.andthen pleasefix
theground wirewith a boltandfix the bolthat
upit.
2.Pleaseinsert support coverintothe support
pole.
3.Pleasefix the headguide withbolt. 4.Pleaseconnect head partto Head guide
andfixit withStopbolt.
5.Pleaseinsert to supportcablehole after
connectingtheload cell cableandshield
cabStickthe power code tothe back of
theHeadpart.
INSTALLATIONS

9
ND-300H
1.Insertthe powerlineintothe support.
Fastenwithbolts andnuts. 2.Fixaground wire with bolt then arrangethe powerlineandloadcell line.
3.Attachthe support coverto the support. 4.Attach the headto the supportthen fastenwith
stopbolt.
INSTALLATIONS

10
ND-300E
1.Insertthe powerlineintothe support.
Fastenwithbolts andnuts. 2.Fixaground wire with bolt then arrangethe powerlineandloadcell line.
3.Attachthe support coverto the support. 4.Attach the headto the supportthen fastenwith
screw.
INSTALLATIONS

11
OPERATIONS
■When you turn on the power switch, the scale will count "00000" to "99999",
then the scale will read "0.0" on the display. This is called the ZERO state.
If the scale is not ZERO state though there is nothing on the platter, press the
ZERO key.
■If the weight is not stable, press the HOLD key. Then you will see the
average weight.
■The display indicates if the scale is at ZERO or if there is a TARE entered into
the scale by way of a ZERO and NET lamps.
1. General Weighing
■Wait until the display shows zero.
①Placeacommodityon
theplatter. ②Removethe commodity fromtheplatter.
N▶OTE: The symbol represents the lamp on the display above.◀
OPERATIONS

12
2. Weighing with Tare
■Tare is the weight of a container being used for a commodity.
■The TARE key subtracts the weight of the container.
①Placeacontainer on
theplatter. ②PresstheTARE key. ③Placeacommodityinthe container,then you will see the
netweightof the commodity.
④Removethecommodity
fromtheplatter.
Youcanweigh another
commoditywiththis
container.
⑤Ifyouwant to quitweighing
withthiscontainer, remove
thecontainerfrom theplatter.
Thenyou will see the weight
ofthecontainer with"-".
⑥PresstheTARE key.
OPERATIONS

13
ERROR MESSAGE
To help the customer's understanding, this scale warns the error messages properly.
ERROR REASONS SOLUTIONS
Err 1 An error of the initial ZERO range Set the platter empty
Err 10 Failure of the analog module Call your CAS dealer
Err 11 Failure of the digital module Call your CAS dealer
Err12 Condition codes are broken Call your CAS dealer for span calibration
SPECIFICATIONS
MODEL ND-300, ND-300H, ND-300E
CAPACITY 150 x 0.02, 0.05kg 300 x 0.05, 0.1kg
DISPLAY : WEIGHT Vacuum Fluorescent Display
5 DIGIT
MEASUREMENT TYPE LOAD CELLTYPE
DISPLAYDESIGNATORS ZERO and NET
MAXIMUM TARE -99.95kg 300kg
POWER SOURCE Refer toSpec Plate
POWER CONSUMPTION APPROX. 10W
TEMPERATURERANGE - 10°C ~ + 40°C
PRODUCTSIZE(mm) 716(W) x 456(D) x 840(H)
*NOTE : Specifications are subject to change for improvement without notice
ERROR MESSAGE & SPECIFICATIONS

1
4
MEMO

15
MEMO

16