CAS CL5000J Series User manual

2
앞표지
CL5000J

3
Table of Contents
1.GENERAL.........................................................................................................................................................................................6
1.1 PRECAUTIONS...................................................................................................................................6
1.2 INTRODUCTIONS.............................................................................................................................8
1.3 SPECIFICATIONS...............................................................................................................................9
1.4 NAMEAND FUNCTIONS.............................................................................................................11
1.5 Basic set - up..........................................................................................................................................15
1.6 SYMBOLS...........................................................................................................................................16
1.7 KEYFUNCTIONS.............................................................................................................................17
1.8 Installation of the Label Roll...............................................................................................................20
2.PROGRAMMING................................................................................................................................................................22
2.1 PLU Programming...............................................................................................................................26
2.1.1CreateBy-WeightPLU(Menucode1120)...........................................................................................................27
2.1.2CreateBy-CountPLU(Menucode1120).............................................................................................................33
2.1.3CreateBy-PCSPLU(Menucode1120)................................................................................................................34
2.1.4 Editing PLU (Menucode1120)................................................................................................................................36
2.1.5ExpandPLU(Menucode 1144)...............................................................................................................................36
2.1.6 Listing PLU (Menucode1150).................................................................................................................................36
2.2 Programming PLUDataTable I........................................................................................................37
2.2.1New/EditSalesMessage(Menucode1240)........................................................................................................37
2.2.2Origin(Menucode1250)............................................................................................................................................38
2.2.3 Barcode (Menucode1260)........................................................................................................................................39
2.2.4Tare(Menucode 1270)................................................................................................................................................41
2.2.5ListUnitSymbol(Menucode 1280).......................................................................................................................42
2.3 Programming PLUDataTable II......................................................................................................43
2.3.1Ingredient(Menu code1310).....................................................................................................................................43
2.4 Speed Key Setting................................................................................................................................44
2.4.1SpeedKey(Menucode1160)...................................................................................................................................44
2.5 Programming Store Data....................................................................................................................45
2.5.1StoreData (Menu code 1410)....................................................................................................................................45
2.6 Programming Global Setting .............................................................................................................46
2.6.1GlobalLabelFormat (Menucode1510)................................................................................................................46
2.6.2BarcodeFormat(Menu code 1520).........................................................................................................................47
2.7 PrintingProgramming.........................................................................................................................48
2.7.1 Printing (Menucode1700).........................................................................................................................................48
2.7.2Inhibit(Select)PrintingItems(Menucode1710)...................................................................................................48
2.7.3PrinterHardware(Menucode1730).......................................................................................................................49
2.7.4LabelSize(Menucode1732)....................................................................................................................................49
2.7.5SensorCalibration(Menucode 1733).....................................................................................................................49

4
2.7.6 Peel Sensor (Menucode1734)...................................................................................................................................49
2.7.7 Print Intensity(Menucode1735)...............................................................................................................................50
2.7.8Adjust Feed Length(Menucode1736)...................................................................................................................50
2.7.9LabelPreprint(Menu code 1737)..............................................................................................................................50
2.7.10PrinterInitialize(Menucode1738).........................................................................................................................50
2.8 Programming Scale Configuration................................................................................................... 51
2.8.1 Department (Menu code 1830)..................................................................................................................................51
2.8.2 Date &Time (Menucode1840)................................................................................................................................52
2.8.3ChangePassword(Menu code 1852)......................................................................................................................52
2.8.4 DisplayTest (Menucode1861).................................................................................................................................52
2.8.5A/DTest (Menu code 1862)........................................................................................................................................52
2.8.6KeyboardTest(Menucode 1863).............................................................................................................................52
2.8.7ChessPrinterTest(Menucode 1864).......................................................................................................................52
2.8.8PrinterSensorTest(Menucode 1865).....................................................................................................................53
2.8.9ScaleParameter(Menucode1870)..........................................................................................................................53
2.8.10ClearMemory(Menucode1890)..........................................................................................................................53
2.8.10.1ClearPLU(Menucode 1891)....................................................................................................................53
2.8.10.2ClearTable1(Menu code 1892).................................................................................................................54
2.8.10.3ClearTable2(Menu code 1893).................................................................................................................54
2.8.10.4 ClearALL(Menucode1894)....................................................................................................................54
2.9 Report..................................................................................................................................................... 55
2.9.1 Report Menu (Menucode 1600)...............................................................................................................................55
2.9.2 Print Report (Menucode1610)..................................................................................................................................55
2.9.3ScaleSalesReport(Menucode 1611)......................................................................................................................55
2.9.4 PLU Report (Menucode 1612).................................................................................................................................56
2.9.5MiscellaneousPLUReport(Menucode1613)....................................................................................................56
2.9.6GroupReport(Menucode1614)..............................................................................................................................56
2.9.7DeptmentReport (Menu code 1615)........................................................................................................................57
2.9.8HourlyReport(Menucode 1616).............................................................................................................................57
2.9.9ClearAll Report(Menucode1650)..........................................................................................................................58
2.10 Communicaation...............................................................................................................................59
2.10.1Communication(Menucode1900).......................................................................................................................59
2.10.2NetworkSetting(Menucode1910).......................................................................................................................60
2.10.3 DHCP(Menucode 1912).........................................................................................................................................60
2.10.4IP(Menucode1913)...................................................................................................................................................61
2.10.5RS232CSetting(Menu code 1915)......................................................................................................................61
3. SALESOPERATION.........................................................................................................................................................62
3.1 Basic Operation.......................................................................................................................................62
3.2 Zero............................................................................................................................................................ 62
3.3Tare.............................................................................................................................................................64
3.3.1 ManualTareEntry..........................................................................................................................................................64
3.3.2WeighedTare Entry........................................................................................................................................................64
3.3.3 HowtoClearTare...........................................................................................................................................................65

5
3.3.4 PresetTare........................................................................................................................................................................65
3.3.5SuccessiveTare...............................................................................................................................................................66
3.3.6Tare Override...................................................................................................................................................................66
3.4 Calling Upa PLU.................................................................................................................................67
3.4.1 Using Numeric Key......................................................................................................................................................67
3.4.2UsingSpeed Key...........................................................................................................................................................67
3.5 Override (FOR key)................................................................................................................................68
3.5.1 By-WeightPLU.............................................................................................................................................................68
3.5.2By-CountPLU...............................................................................................................................................................69
3.5.3 By-PCS PLU..................................................................................................................................................................70
3.6 Sales Operation........................................................................................................................................72
3.6.1Weighed ItemOperation..............................................................................................................................................72
3.6.2ByCountItem................................................................................................................................................................73
3.6.3 By PCS Item ...................................................................................................................................................................74
3.7Add-UpTransaction................................................................................................................................76
3.8 Void..........................................................................................................................................................78
3.9 Return.........................................................................................................................................................79
3.10 Prepack Key...........................................................................................................................................80
3.11 Direct Discount......................................................................................................................................82
3.11.1%DiscountPriceKey................................................................................................................................................82
4.Appendix...........................................................................................................................................................................................83
4.1 LabelFormat.........................................................................................................................................83
4.2 Fixed Label Format Sample...............................................................................................................87
4.3 Label Field................................................................................................................................................88
4.3.1 Item Label Field..............................................................................................................................................................88
4.4 ASCII CodeTable................................................................................................................................90
4.5 Window Character Set Information..................................................................................................91

6
1.GENERAL
1.1 PRECAUTIONS

7
※This equipment is indoor use and all the communication wirings are limited to
inside of the building.

8
1.2 INTRODUCTIONS
Thank you for purchasing the CAS CL5000J price computing electronic printing scale.
We have designed this equipment with many advanced features, high quality
construction, and user-friendly menu driven programming. We are confident that
you will find the CAS CL5000J scale will meet all of your most demanding needs.
Remember, for proper installation and maintenance please have your Authorized CAS
Dealer do the primary installation, programming, and demonstration. Your CAS
Authorized Dealer also has a wide variety of supplies, accessories, and expansion
options for whatever your new and increasing demands may require. Authorized
CAS dealers are trained to help you with every aspect of the CL5000J and should you
need servicing, they are expertly trained by CAS to assist you with virtually any
problem.

9
1.3 SPECIFICATIONS
Max. Capacity 3/6kg 6/15kg 15/30kg
Interval 1/2g 2/5g 5/10g
Max. Tare -2.999kg -5.998kg -9.995kg
A/D Conversion Rate Approx. 8 times/sec.
Measurement Type Load Cell
Platter Size 380 x 244 mm
Key
48 PLU key,
36 function
key
72 PLU key,
36 function
key
Speed Key
Standard Type (B)
96 PLU
Pole Type (P, R)
144 PLU
VFD
Display Tare : 4 digit
Weight : 5 digit
Unit Price : 6 digit
Total Price : 6 digit
Printer Speed 75 mm/sec.
Printing Resolution 202 dpi
Label Size Width: 40mm~60 mm
Length: 30mm~80 mm
Barcode Type EAN13, I2OF5, CODE128C
Font Small, Middle, Large Size, Free Format, Italic, Bold, Underline,
Through Line, Double through line, Reverse, shadow, outline
Printer Type DIRECT THERMAL PRINT

10
Operating Temp. -10°C ~ 40°C (14°F ~ 104°F)
Power AC 100~240V 50/60Hz 1.5A
Number Range
PLU 6000 1-999999
direct ingredients 300 chracter 1000 PLU
Indirect Ingredient 400 character 100 1~100
User Defined Barcode Format 20 1~20
Department 99 1~99
Origin 500 1~500
Group 99 1~99
Bitmap Image 5 1~5
Quantity Symbol 8 1~8
Report
Tare Table 99 1~99
30 1~30
Programmable Data
Label Format
10 51~60
Sales Period user selectable reporting period.
Sales Report Mode Read & Reset
Note: Specifications are subject to change without notice.

11
1.4 NAMEAND FUNCTIONS
OVERALLVIEW
■Standard Type
■Pole Type P

12
■Pole Type R
■Hanging Type

13
DISPLAY
■Standard Type (B,P)
■Pole Type R
Max 6 / 15 kg Min 40 g e=d=2/5g
KEYBOARD
Standard

1
4
Pole type
Hanging type

15
1.5 Basic set - up
How to install tray
H-type mounting method(3 suggested)

16
1.6 SYMBOLS
SYMBOLS DESCRIPTION
ST (▼) Stable weight indicator
0▶◀ Zero weight indicator
NET (▼) Net weight indicator
AUTO Print Mode indicator
SAVE Auto clearing status indicator
PREPACK Auto clearing status indicator
DC (▼) Discount status indicator
SHIFT (▼) Speed key shift status indicator
TR Data transmission status indicator

1
7
1.7 KEY FUNCTIONS
KEY DESCRIPTION
Numeric keys. Used to enter pricing, qty, count, tare, etc.
Double zero key.
Clear key. Used to clear erroneous entries and error conditions.
Re-Zero key. Use to remove small variations in the scale’s zero.
Tare key. Use to manually enter and remove tare weights.
Override key. For temporary price change entry.
Date & Time key. Toggles the display between time, date, scale number
and department number.
MENU key. This key toggles from program menu to sale mode.
Page up key: only CL5000
For key. Use this key for by- count or by pcs pricing: 1 / 3 FOR $1.00.
It toggles between the QTY, PIECE, and PRICE fields.
AUTO key. Auto-print mode
Pre-Pack key. Used to enter Pre-Packaging mode in which the scale
Auto-prints for every transaction and prevents the auto clearing of data.
Save key. Save mode prevents the auto clearing of any called-up data
like tare weight, PLU pricing, etc.
Void key. To remove erroneous sales from ADD-Up
When you type a PLU number and press this key, it calls-up that PLU.

1
8
KEY DESCRIPTION
ADD-Up key. This key when used in conjunction with ST/TTL key allows
you print a customer-total label as well as individual transaction labels.
Page Down key. only CL5000
Multi-Label key. Use this key to print multiple sales of the same
transaction.
Escape key. It is used to exit in program mode.
Subtotal / Total key. Used with the ADD key in order to print customer-
totals.
Feed key. Use this key to feed labels or paper through printer
Pay key. Use this key to calculate change.
Test key.
Print key. Used to manually print transactions and also serves as an
ENTER key.
Return key. Used to credit sales for erroneous transactions or returns.
Shift Key. Used to SHIFT function in program Mode
Discount % key. Used to discount price.
Insert key: only CL5000
WT/CT key. Toggles between Weight PLU and Count PLU.
CAPS Key: Used to type a small letter in program mode.
Miscellaneous By-Weight PLU key.
Miscellaneous By-Count PLU key.
Negative Discount
DELETE key. CL5000 only

19
KEY DESCRIPTION
Alpha keys. Used to type text data.
Used to type $
Backspace key. Used to backspace and delete text data.
Space bar.
Used to go to next line to enter text
Special symbol keys.
Used to type special symbol. (See ASCII code table on page 192)
For future
Note: X key is only used in sale mode and ESC key is only used in program mode.
Sale mode : X key
Program mode : ESC key

20
1.8 Installation of the Label Roll
• Label Specifications
Outer diameter of roll : 100mm
Inner diameter of roll : 40mm
Width of receipt roll : 40, 50, 60mm
Width of label roll : 60mm(MAX)
• PrintArea
Width of label : 60mm(MAX)
Length of label : 80mm(MAX)

21
To install the label roll atANY time you must follow the directions
in this section:
Press the FEED key. two or times forauto Label adjustment⑨
*If label position is not correct, you have to check follows :
a, Label size.(Label setting menu)
b. Feed Adjustment .(Feed adjustment menu)
c. Sensor calibration(Sensor Calibration menu)