CAS DL Series User manual

2

3
CONTENTS
PRECAUTIONS................................................4
PREFACE..............................................................6
NAMESAND FUNCTIONS.....................6
INSTALLATIONS...........................................8
OPERATIONS.......................................................9
1. General Weighing.............................................9
2. Weighing withTare........................................10
3. Changing Unit of Weight..............................10
4. HOLD Function..............................................11
5. Comparator Function ...................................11
6.AUTO Power Off Function..........................13
BATTERYMAINTENANCE.................14
ERROR MESSAGE..........................................14
SPECIFICATIONS........................................15

4

5

6
PREFACE
Thank you for purchasing our CAS DL series.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your specialty departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have reliability.
This manual will help you with proper operation and care of the DL series.
Please keep this handy for future reference.
NAMES AND FUNCTIONS
OVERALL VIEW

7
DISPLAYAND KEYBOARD
■KEY FUNCTIONS
KEYS FUNCTIONS
Used to set the zero point.
Used to input or cancel the weight of tare.
Usedto operate thefollowingsequence on the display.
[WEIGHT][HOLD][WLonor off] [WEIGHT]
Usedto turn onandoffthescale.

8
INSTALLATIONS
1. Insert and fasten the bracket support assembly screws.
2. Connect the load cell wire and power line to head.
3. Insert the support cover into the support.
4. Insert and fasten the screws.

9
OPERATIONS
■Turn on the display by pressing the ON/OFF key. Then the display will show
all the segments and count up "0" to "9". You may stop this automatic counting
by pressing the ZERO key.
■When you turn on the display, make sure that platter is empty.
Otherwise, display will show "Err", an error of initial zero range. Please refer
"ERROR MESSAGE" section for more information on page 16.
■When the weight becomes stable the display shows the stable sign(0) on.
■You may need to make it "0.0" by pressing the ZERO key unless the display
indicate "0.0" under the empty platter.
1. General Weighing
①Placea commodity on
theplatter. ②Remove the commodity fromthe platter.

10
2. Weighing with Tare
■TARE means the weight of container being used for a commodity.
■TARE key function is to subtract the weight of the container from full weight
loaded.
①Placea container onthe
platter. ②PresstheTARE key. ③Place acommodityintothe container,then the display
willshowonlythe weightof
thecommodity.
④Removecontainer and
commodity,thenthe display
willshowthe weight ofthe
containerwith "-" symbol.
⑤PresstheTARE key,then
displaywillshowthe "0.0".
3. Changing Unit of Weight (lb, kg)
■Press the MODE key first. Holding it, press the TARE key in the simple
weighing mode. The display shows the "UnIt" shortly and then you may select
lb, kg as the unit of weight.

11
4. HOLD Function
■When the weight is not stable, press the MODE key.
The display shows the “HOLd” and then press ZERO key.
The display will show average weight.
②Thedisplayshowsthe "HOLd".
③PressZEROkey.Then"HOLd"
displayblinkfortwo times.
④PressZERO key. Thenthe
displaywillshowthe average
weight.The average weight
blinkfor two times.
①Whenthe weight is
unstable,pres the MODEkey.
*NOTE : Stable indication(0) will not display in HOLD mode.
⑤Removethe commodityfrom
theplatter.
5. Comparator Function - HI / LOW Limit Setting
①PressTARE key toactivate
thisfunction. The display
shows"WLON".
②PresstheMODE keyuntil
thedisplayshows"WL
OFF"."WL OFF"means
thatcomparator function
isnot activated.
③PressZEROkeyonce to set
upthe low limit. Thedisplay
shows"0.0"and thefirst
numberflashes.

12
④PresstheMODE keyto
havenumber increase. To
moveflash to nextdigit,press
theTARE key.
⑤PressZEROkeyto set up
HIGHlimit.Thedisplayshows
"0.0" and youcan change
thesenumbers by pressing
MODEkey. If youwant to move
tonext digit youcango by
pressingTARE key.
⑥Ifyouset upHIGHlimityou
cango out bypressingZERO
key,and you cansee"ENd"
messageshortlyand "WL
on"message on thedisplay.
⑦Ifyouset upHIGHlimitand LOW limit incorrectly, "Err"willbeshownonthe display.
Thenyou mayneed to setitupagain. For example,LOWLIMIT=69.9 kg andHIGH
LIMIT=79.9kg this isincorrect settingbecauseHIGHlimit is lowerthan theLOWlimit.
WhenHIGH and LOWlimitareset as the sameorabove maximumcapacityit still shows "Err" message.
⑧Ifyou want togoback to the
simpleweighingmode just
pressMODEkeytwice.
⑨Supposethat the HIGHlimit
andLOW limit aresetupas
79.9kgand 69.9kg respectively.
Ifthe weight loaded is2kg
betweenHIGH andLOWlimit
thedisplayshows "OK" andthe
scalecontinues to beepslowly.
Ifthe weight loaded isabove
79.9kg,HIGH limit, thescale
continuesto beep rapidly.

13
6.Auto Power Off Function
Auto-Power off function is to automatically power off as time is set. This
function is helpful to save battery, which is not in use. The following is the
setting procedure of Auto-power off.
①Whenthe scale isturned off
pressON/OFF key, holding
ZEROkey.Then youwillsee
the"AP-10".(If youhaveset
thisbefore,display will show
previousvalue.)
②PresstheTARE keyuntil the
displayshowsthe"AP-x0"
thatyou wish to take.
(Referto TABLE 1.)
③PresstheON/OFF key,and
thenthe scale saveswhat you
programmedand showsall
thesegments, counting up
"0"to "9".
TABLE 1.
DISPLAY FUNCTION
AP-00 This function does not automatically power off.
AP-10 This function does automatically power off when the scale is not in
use for 10 minutes.
AP-20 This function does automatically power off when the scale is not in
use for 20 minutes.
AP-30 This function does automatically power off when the scale is not in
use for 30 minutes.

1
4
BATTERY MAINTENANCE
LOW BATTERY WARNING
When the battery is low the display shows the "BAT" sign.
You can replace the battery new one.
If you still use the scale without replacing the battery the scale may provide
incorrect result on measurement.
ERROR MESSAGE
ERROR REASONS SOLUTIONS
Err An error of the initial zero range Set the platter empty.
Init Problems onAnalog Module
Try to turn OFF and ONthe scale.
Call your CAS dealer if still problems.
OFL Overload on the platter Remove it fromthe platter Do not put somthing exceeding maximum
capacity on the platter
UNStA Unstable conditions of scale Make the scale stable conditions
■How to connect the ground wire.

15
SPECIFICATIONS
MODEL DL-60N DL-100N DL-150N
CAPACITY 150lb / 60.00kg 200lb / 100.00kg 300lb / 150.00kg
MIN. DIVISION 0.05lb / 20g 0.1lb / 50g 0.1lb / 50g
INTERNAL RESOLUTION 1/30,000 1 / 20,000 1 / 30,000
EXTERNAL RESOLUTION 1/3,000 1 / 2,000 1 / 3,000
DISPLAY 5 digit LCD
SYMBOLS STABLE, ZERO, kg,lb, BAT, NET, HI, LO, OK
KEYS ZERO, TARE, MODE, ON/OFF
FUNCTIONS General Weighing, Hold Function
Comparator Function
DIMENSIONS 540 x 415 x 775mm
PLATTER SIZE 395 x 520
WEIGHT 16 kg
POWER 1.5V x 6 (option C size battery) or 9V adapter
MINIMUM VOLTAGE
OF THE BATTERY about 5.8V
BATTERY LIFE Approx. 110 hours (Alkaline battery)
TEMPERATURE -10°C ~ 40°C
OPTION 1.5V x 6 (C size battery is optional)
*NOTE : Specifications are subject to change for improvement without notice

16
MEMO

1
7
MEMO

1
8
MEMO

19

20