CAS PD-II User manual

9002 - PD2- 0011- 1
2004. 8
PD -
ECR Interface Scale
O W NER’SMA NUAL

CONTENTS
PRECAUTIONS4
PREFACE 6
NAMESANDFUNCTIONS6
OPERATIONS8
1
. General Weighing 9
2
. ECRInterface 9
ERRORMESSAGE10
SPECIFICATIONS11

45
For consistent and accurate reading,
maintain periodical check by your
CAS authorized dealer.
Avoid sudden shock to the scale.
Internal mechanism could be damaged.
Place the scale on firm and temperature
consistent environment.
Keep the scale away from other
electromagnetic generating devices.
This may interfere with accurate
reading.
Grab on the bottom of the scale when
moving. Do not hold by the platter.
Attention
If the scale is not properly level, please adjust
the 4 legsat the bottom of the scale
(turn legs clockwise or counterclockwise)
so as to center the bubble of
the leveling gauge
inside the indicated
circle.
Do not disassemble the scale.
When any damage or defect occurs,
contact your CAS
authorized dealer
immediately for
proper repair.
Do not overload beyond the maximum
weight limit.
Do not pull the plug by its cord when
unplugging. Damaged cord could cause
electric shock or fire.
To prevent from fire occurring, Do not
place or use the scale near flammable or
corrosive gas.
Avoid placing the scale near heater
or in direct sunlight.
Scale must be grounded to minimize
electricity static. This will minimize
defect or electric shock.
Insert plug firmly to wall outlet to
prevent electric shock.
To reduce electric shock or incorrect
reading, Do not spill water on the scale
or place it in humid condition.
Warning
PRECAUTIONS
Toensurethatyou getthemostfromyourscale , pleasefollowthese
instruction
.
Thesocket-outletshall beinstalledneartheequipmentand shall beeasily
accessible
. Make suretoplug yourscale intotheproperpoweroutlet . For
maximumperformance
, plug intoapoweroutlet30 minutesbeforetheusagefor
warmup
.

7
6
PREFACE
NAMESANDFUNCTIONS
Thank you for purchasing your CAS PD-II sacle.
CAS scales are designed and produced under rigid quality control to deliver
outstanding performance, reliability and long life.
This manual will help you with the proper operation and care of your new
CAS PD-II.
Please review the PD-II sacle manual before you use the scale and keep it handy
for future reference.
OVERALL VIEW
PLATTER
DISPLAY
ADJUSTING BOLT
<STANDARDTYPE>
SIDE PLATE
KEYBOARD
POWER SWITCH
PARALLEL PORT
RS232
PLATTER
DISPLAY
ADJUSTING BOLT
POLE TYPE
DISPLAY CABLE
POLE TYPE DISPLAY
KEYBOARD
<POLETYPE>
KEYBOARD
DISPLAY

9
8
Makesurethatpoweris OFF.Whilepressing "#"key,
turnon thepower.“EcrSEt”is shownon thedisply.And then
currentECRtypeis shownon thedisplay as “tYPE-2”.
2 . ECRInterface
PD-II can interface with most ECRs by selecting TYPE 0 to TYPE 6.
ECRTypeSelection
OPERATIONS
1
. General Weighing
The display indicates ZERO symbol, if weight is at ZERO.
When the display is not zero though there is nothing on the platter, press the
ZERO key.
Turnon thepower.Thedisplay shows 0.00 or0.000.
MakesurethatST(Stable)and ZEROlamps areOn.
Placeanitemon theplatter.WhentheST(Stable)lampis
0n,readtheweight.
KEY FUNCTIONS
Usedtosetthezeropointto0.00 or0.000.
Usedas ESC key inSetup Mode.
Usedas ENTERkey inSetup Mode.
Usedas Scroll key inSetup Mode.
KEY DESCRIPTION
Ifyou selectECRtype5,press the" " key until thedisplay
shows “tYPE-5”. (RefertoTable1.)
TosavecurrentECRtype,press theZEROkey.

11
10
SPECIFICATIONS
ERRORMESSAGE
FailureofA/DModule
Anerrorofinitialzerorange
Call yourCASdealer
Settheplatterempty
Makesurethereis aplatteron thescale
ERRORREASONS SOLUTIONS
Err
Err 1
MostPOS,ECRs and Some
TEC POS System
SharpER-Axxx,New Sanyo
ECRs using RS-232 others
MostPOS System
Samsung,CRS,NCR2170 and
otherECRs
NCI General.
MostPOS Software
Samsung ER-670
TEC 4 Digit4BitParallel
(New kg)
TEC 4 Digit4BitParallel
(Oldkg)
Universal4 BitParallel
ECR-TYPE 0
ECR-TYPE 1
ECR-TYPE 2
ECR-TYPE 3
ECR-TYPE 4
ECR-TYPE 5
ECR-TYPE 6
key
4-BitParallelRS-232 Serial
Serial Communication
9600 Baud Rate, 7 Date bit, Even Parity. 1 Stop bit
Table1.
MODEL
DIVISION
INTERNALRESOLUTION
EXTERNALRESOLUTION
DISPLAY
DISPLAY LAMP
INTERFACE
PRODUCT SIZE
PLATTERSIZE
PRODUCT WEIGHT
TEMPERATURE RANGE
POWERSUPPLY
15 lb30 lb60 lb150 lb
6lb0.002 lb15 lb0.005 lb30 lb0.01lb60 lb0.02 lb
15 lb0.005 lb30 lb0.01 lb60 lb0.02 lb150 lb0.05 lb
1/90,000
1/3,000 DUAL
VFD6 DIGITS
ST(STABLE),ZERO
RS-232C,4-BitParallelCommunication (ECRInterface)
380(W)280(D)79(H)[mm]
380(W)280(D)[mm]
6.7kg
10°C 40°C
AC 120V /60Hz
DUALINTERVAL
Description
MENU