Casio PCR T2000 - Deluxe 96 Department Cash... User manual

THANK YOU
YOUR RECEIPT
CALL AGAIN !
GROCERY
DAIRY
H.B.A.
FROZEN
FOOD
DELICATESSEN
PCR-T2000
ELECTRONIC CASH REGISTER
USER'S MANUAL
CI Canada

2
E
Safety Precautions
•To use this product safely and correctly, read this manual thoroughly and operate as
instructed.
After reading this guide, keep it close at hand for easy reference.
Please keep all informations for future reference.
•Always observe the warnings and cautions indicated on the product.
About the icons
In this guide various icons are used to highlight safe operation of this product and to prevent
injury to the operator and other personnel and also to prevent damage to property and this
product. The icons and definitions are given below.
Indicates that there is a risk of severe injury or death if used incorrectly.
Indicates that injury or damage may result if used incorrectly.
Icon examples
To bring attention to risks and possible damage, the following types of icons are used.
The symbol indicates that it includes some symbol for attracting attention (including
warning). In this triangle the actual type of precautions to be taken (electric shock, in this
case) is indicated.
The symbol indicates a prohibited action. In this symbol the actual type of prohibited
actions (disassembly, in this case) will be indicated.
The symbol indicates a restriction. In this symbol the type of actual restriction (removal of
the power plug from an outlet, in this case) is indicated.
Warning!
Handling the register
Should the register malfunction, start to emit smoke or a strange odor, or
otherwise behave abnormally, immediately shut down the power and unplug
the AC plug from the power outlet. Continued use creates the danger of fire and
electric shock.
• Contact CASIO service representative.
Do not place containers of liquids near the register and do not allow any
foreign matter to get into it. Should water or other foreign matter get into the
register, immediately shut down the power and unplug the AC plug from the
power outlet. Continued use creates the danger of shorting, fire and electric
shock.
• Contact CASIO service representative.
Should you drop the register and damage it, immediately shut down the power
and unplug the AC plug from the power outlet. Continued use creates the
danger of shorting, fire and electric shock.
• Attempting to repair the register yourself is extremely dangerous. Contact CASIO service
representative.

3E
Warning!
Never try to take the register apart or modify it in any way. High-voltage
components inside the register create the danger of fire and electric shock.
• Contact CASIO service representative for all repair and maintenance.
Power plug and AC outlet
Use only a proper AC electric outlet (100V~240V) . Use of an outlet with a
different voltage from the rating creates the danger of malfunction, fire, and
electric shock. Overloading an electric outlet creates the danger of overheating
and fire.
Make sure the power plug is inserted as far as it will go. Loose plugs create the
danger of electric shock, overheating, and fire.
• Do not use the register if the plug is damaged. Never connect to a power outlet that is loose.
Use a dry cloth to periodically wipe off any dust built up on the prongs of the
plug. Humidity can cause poor insulation and create the danger of electric
shock and fire if dust stays on the prongs.
Do not allow the power cord or plug to become damaged, and never try to
modify them in any way. Continued use of a damaged power cord can cause
deterioration of the insulation, exposure of internal wiring, and shorting, which
creates the danger of electric shock and fire.
• Contact CASIO service representative whenever the power cord or plug requires repair or
maintenance.
Caution!
Do not place the register on an unstable or uneven surface. Doing so can
cause the register — especially when the drawer is open — to fall, creating the
danger of malfunction, fire, and electric shock.
Do not place the register in the following areas.
• Areas where the register will be subject to large amounts of humidity or dust, or directly
exposed to hot or cold air.
• Areas exposed to direct sunlight, in a close motor vehicle, or any other area subject to very
high temperatures.
The above conditions can cause malfunction, which creates the danger of fire.
Do not overlay bend the power cord, do not allow it to be caught between
desks or other furniture, and never place heavy objects on top of the power
cord. Doing so can cause shorting or breaking of the power cord, creating the
danger of fire and electric shock.
Be sure to grasp the plug when unplugging the power cord from the wall outlet.
Pulling on the cord can damage it, break the wiring, or cause short, creating the
danger of fire and electric shock.
Never touch the plug while your hands are wet. Doing so creates the danger of
electric shock. Pulling on the cord can damage it, break the wiring, or cause
short, creating the danger of fire and electric shock.
Never touch the printer head and the platen.

4
E
Introduction & Contents
Introduction & Contents ...................................................................................... 4
Getting Started ..................................................................................................... 7
Remove the cash register from its box. ............................................................................ 7
Remove the tape holding parts of the cash register in place. ........................................... 7
Install the three memory backup batteries........................................................................ 7
Install receipt/journal paper. .............................................................................................. 9
Plug the cash register into a wall outlet. ......................................................................... 11
Insert the mode key marked “PGM” into the mode switch. ............................................. 11
Turn the mode key to the “REG” position........................................................................ 11
Set the date. ...................................................................................................................12
Set the time..................................................................................................................... 12
Tax table programming................................................................................................... 13
Programming for the U.S. tax tables procedure .................................................................................... 13
Programming for Canadian tax tables procedure.................................................................................. 14
Introducing PCR-T2000...................................................................................... 16
General guide ................................................................................................................. 16
Roll paper, Receipt On/Off key, Mode key, Drawer, Drawer lock ........................................................... 16
Mode switch .......................................................................................................................................... 17
Lock/unlock the multipurpose tray......................................................................................................... 18
Displays .......................................................................................................................... 19
Keyboard......................................................................................................................... 20
Basic Operations and Setups ........................................................................... 22
How to read the printouts .................................................................................................... 22
How to use your cash register............................................................................................. 23
Displaying the time and date .......................................................................................... 24
Preparing coins for change............................................................................................. 24
Preparing and using department keys................................................................................. 25
Registering department keys.......................................................................................... 25
Programming department keys....................................................................................... 27
Registering department keys by programming data ....................................................... 28
Preparing and using PLUs .................................................................................................. 29
Programming PLUs ........................................................................................................ 29
Registering PLUs............................................................................................................ 30
Preparing and using discounts/premiums ........................................................................... 31
Programming discounts/premiums ................................................................................. 31
Registering discounts/premiums..................................................................................... 32
Preparing and using reductions........................................................................................... 33
Programming for reductions............................................................................................ 33
Registering reductions.................................................................................................... 34
Calculating the merchandise subtotal ................................................................................. 35
Registering charge and check payments ............................................................................ 36
Registering returned goods in the REG mode .................................................................... 37
Registering returned goods in the RF mode ....................................................................... 38
Registering money received on account ............................................................................. 39
Registering money paid out................................................................................................. 39
Making corrections in a registration..................................................................................... 40
No sale registration ............................................................................................................. 42
Printing the daily sales reset report..................................................................................... 43
Convenient Operations and Setups ................................................................. 44
Clerk control function........................................................................................................... 44
Clerk sign on and sign off ............................................................................................... 44

Introduction & Contents
5E
Post-finalization receipt format, General printing control, Compulsory, Machine features .. 45
About post-finalization receipt......................................................................................... 45
Programming general printing control............................................................................. 46
Programming compulsory and clerk control function...................................................... 47
Programming read/reset report printing control .............................................................. 48
Setting a store/machine number ......................................................................................... 48
Programming to clerk .......................................................................................................... 49
Programming clerk number ............................................................................................ 49
Programming trainee status of clerk ............................................................................... 49
Programming descriptors and messages............................................................................ 50
Programming report descriptor, grand total, special character,
report title, receipt message and clerk name................................................................. 50
Report descriptor .................................................................................................................................. 50
Clerk name, Grand total, special character, Report title ....................................................................... 51
Receipt message .................................................................................................................................. 52
Programming department key descriptor........................................................................ 52
Programming PLU descriptor ......................................................................................... 53
Programming function key descriptor ............................................................................. 54
Programming receipt message/logo stamp control function........................................... 54
Entering characters .............................................................................................................55
Using character keyboard............................................................................................... 55
Entering characters by code ........................................................................................... 56
Department key feature programming................................................................................. 57
Batch feature programming ............................................................................................ 57
Individual feature programming ...................................................................................... 58
PLU feature programming ................................................................................................... 59
Batch feature programming ............................................................................................ 59
Individual feature programming ...................................................................................... 60
Percent key feature programming........................................................................................ 63
Registering manual tax................................................................................................... 64
Currency exchange programming ....................................................................................... 65
Currency exchange rate programming ........................................................................... 65
Currency exchange feature programming ...................................................................... 65
Other function key feature programming ............................................................................. 68
Cash, Charge, Check key ............................................................................................... 68
Minus key, Received on account, Paidout key, #/No sale key, No sale key .................... 69
Calculator functions............................................................................................................. 70
About the daylight saving time............................................................................................. 71
Printing read/reset reports................................................................................................... 72
Reading the cash register's program................................................................................... 78
Troubleshooting ................................................................................................. 81
When an error occurs.......................................................................................................... 81
When the register does not operate at all ........................................................................... 82
In case of power failure ....................................................................................................... 83
When the L sign appears on the display ............................................................................. 83
User Maintenance and Options ........................................................................ 84
To replace journal paper...................................................................................................... 84
To replace receipt paper...................................................................................................... 85
Options ................................................................................................................................ 85
Specifications..................................................................................................... 86
Index.................................................................................................................... 87

6
Introduction & Contents
E
Take-up reel
Roll paper
Memory backup
batteries
User's manual/
Drawer key
Mode key
(Operator/Program key)
User'sManual
Unpacking the register
Welcome to the CASIO PCR-T2000!
Congratulations upon your selection of a CASIO Elec-
tronic Cash Register, which is designed to provide years
of reliable operation.
Operation of a CASIO cash register is simple enough to
bemasteredwithoutspecial training. Everything youneed
to know is included in this manual, so keep it on hand for
reference.
Consult your CASIO dealer if you have any questions
about points not specifically covered in this manual.
GUIDELINES LAID DOWN BY FCC RULES FOR USE OFTHE UNIT INTHE U.S.A.
(Not applicable to other areas)
FCC WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
The main plug on this equipment must be used to disconnect main power.
Please ensure that the socket outlet is installed near the equipment and shall be easily accessible.
Please keep all information for future reference.

7
Getting Started
E
This section outlines how to unpack the cash register and get it ready to operate.You should read this part of
the manual even if you have used a cash register before. The following is the basic set up procedure, along
with page references where you should look for more details.
Getting Started
1.
2.
Install the three memory
backup batteries.
1. Remove the printer
cover and open the
platen arm.
3.
printer cover
platen arm
2. Remove the battery
compartment cover.
Slide the cover and
pull it up.
battery compartment cover
User'sManual
Remove the cash register from its box.
Make sure that all of the parts and accessories
are included.
Remove the tape holding parts of
the cash register in place.
Also remove the small plastic bag taped to the
printer cover. Inside you will find the mode keys.

8
Getting Started
E
3. Note the (+) and (–) markings in the battery
compartment. Load a set of three new SUM-
3 (UM-3) batteries so that their positive (+)
and negative (–) ends are facing as indicated
by the markings.
Install the three memory backup batteries. (continued…)
3.
Important!
These batteries protect information stored in your cash register's memory when there is a power
failure or when you unplug the cash register. Be sure to install these batteries.
Precaution!
Incorrectly using batteries can cause them to burst or leak, possibly damaging the interior of the
cash register. Note the following.
•Be sure that the positive (+) and negative (–) ends of the batteries are facing as marked in the
battery compartment when you load them into the unit.
•Never mix batteries of different types.
•Never mix old batteries with new ones.
•Never leave dead batteries in the battery compartment.
•Remove the batteries if you do not plan to use the cash register for long periods.
•Replace the batteries at least once every two years, no matter how much the cash register is
used during the period.
WARNING!
•Never try to recharge the batteries supplied with the unit.
•Do not expose batteries to direct heat, let them become shorted or try to take them apart.
Keep batteries out of the reach of small children. If your child should swallow a battery, consult a
physician immediately.
4. Replace the battery compartment cover. 5. Close the platen arm and replace the printer cover.

9
Getting Started
E
Step 1
Remove the printer cover.
Step 2
Open the platen arm.
Step 3
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Complete
Replace the printer cover,
passing the leading end of
the paper through the
cutter slot. Tear off the
excess paper.
Step 5
Close the platen arm
slowly until it locks
steadily.
Step 4
Put the leading end of the
paper over the printer.
To install receipt paper
Install receipt/journal paper.
Important!
Take away the head protection sheet from the printer and close the platen arm.
Caution! (in handling the thermal paper)
•Never touch the printer head and the platen.
•Unpack the thermal paper just before your use.
•Avoid heat/direct sunlight.
•Avoid dusty and humid places for storage.
•Do not scratch the paper.
•Do not keep the printed paper under the following circumstances:
High humidity and temperature/direct sunlight/contact with glue, thinner or a rubber eraser.
4.
Platen arm
Platen
Printer

10
Getting Started
E
To install journal paper
Step 1
Remove the printer cover.
Step 2
Open the platen arm.
Step 3
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Step 4
Put the leading end of the
paper over the printer.
Step 5
Close the platen arm
slowly until it locks
steadily.
Step 6
Remove the paper guide of
the take-up reel.
Step 7
Slide the leading end of
the paper into the groove
on the spindle of the take-
up reel and wind it onto
the reel two or three turns.
Step 8
Replace the paper guide of
the take-up reel.
Step 9
Place the take-up reel into
place behind the printer,
above the roll paper.
Step 10
Press the |key to take
up any slack in the paper.
During machine
installation, press the |
key after power on.
Complete
Replace the printer cover.

11
Getting Started
E
Plug the cash register into a wall outlet.
Be sure to check the sticker (rating plate) on the side
of the cash register to make sure that its voltage
matches that of the power supply in your area.
Insert the mode key marked “PGM”into the mode switch.
Turn the mode key to the“REG”position.
The display should change to the following.
CAL
REG
OFF
RF
PGM
X
Z
5.
6.
7.
OP
C-A02
PGM
C-A32 CAL
REG
OFF
RF
PGM

12
Getting Started
E
Set the date.
Set the time.
CAL
REG
OFF
RF
PGM
X
Z
Mode Switch
PGM
C-A32
61s6:::: 6x6C
Current time
Example:
08:20 AM 20820
09:45 PM 22145
CAL
REG
OFF
RF
PGM
X
Z
Mode Switch
PGM
C-A32
8.
9.
61s6 :: :: :: 6x6C
Year Month Day
Current date
Example:
June 15, 2002 2020615

13
Getting Started
E
Tax table programming
Programming automatic tax calculation
Important!
After you program the tax calculations, you also have to individually specify which departments
(page 27) and PLUs (page 29) are to be taxed.
For this cash register to be able to automatically register state sales tax, you must program its tax tables with
tax calculation data from the tax table for your state. There are three tax tables (U. S.) and four tax tables
(Canada) that you can program for automatic calculation of three/four separate sales taxes.
Programming for the U.S. tax tables procedure
The procedure to setup the tax table is printed on the guidance receipt. First issue the guidance receitpt by
the /key and follow it to set the tax table.
/22/20101/
10.
02:HOW TO PROGRAM
TAX TABLE?
•SELECT YOUR STATE AND
ENTER NUMBER THEN
PRESS HELP> KEY.
0101:ALABAMA
0201:ALASKA
0301:ARIZONA
0401:ARKANSAS
0501:CALIFORNIA
:
:
5001:WISCONSIN
5101:WYOMING
Follow these steps.
PLEASE SELECT YOUR
DISTRICT NUMBER FROM
BELOW TABLE.
1)TURN MODE KEY TO PGM.
2)3 SUBTOTAL>
3)025 SUBTOTAL>
SET TABLE1
4)XXXX CASH>KEY.
SET TABLE2(IF NECESSARY)
5)XXXX CASH>KEY.
6) SUBTOTAL>
XXXX IS DISTRICT NUMBER
ALABAMA
0101: 4% State
0102: 4.5% State & Local
0103: 5% State & Local
0104: 5.5% State & Local
:
:
0111: 9 % State & Local
(Alabama)
ENTER NUMBER THEN
PRESS HELP> KEY.
01:HOW TO PROGRAM
DATE AND TIME?
02:HOW TO PROGRAM
TAX TABLE?
:
:
07:WHAT IS THE
ELECTRONIC JOURNAL?

14
Getting Started
E
Tax table programming (continued)
Programming for Canadian tax tables procedure
State sales tax calculation data tables for all of the states that make up all Canadian provinces are included on
this page. This data is current as of October 30, 1994. Simply find your province in the tax tables and input
the data shown in its table.
Programming tax table
Example 1: Federal tax 7% (Add-on/round-off) Example 2: Ontario 10 % (Tax-on-tax/Round-off)
10.
• 4 tax tables are used for the following purpose
Table 1: Used for the federal taxable items.
Table 2: Used for the provincial taxable items.
Table 3/4: Used for the provincial taxable items for different tax table.
CAL
REG
OFF
RF
PGM
X
Z
Mode Switch
PGM
C-A32
CAL
REG
OFF
RF
PGM
X
Z
Mode Switch
PGM
C-A32
ONTARIO
7%
7
5002
4
3s
4
0125s
4
7a
4
5002a
4
s
4
3s
4
0225s
4
10a
4
5004a
4
s
ONTARIO
10%
10
5004
2
2
2
2
2
2
2
2
Assign table 1
7
5002
Terminate the program
Assign table 2
Table 3/4: 0325/0425
10
5004
Terminate the program

15
Getting Started
E
*
NOVA
SCOTIA
10%
10
5004
*
ONTARIO
10%
10
5004
*
QUEBEC
10%
10
5004
*
NEW
FOUNDLAND
12%
12
5004
*
BRITISH
COLUMBIA
6%
0
1
2
14
24
41
58
74
MANITOBA /
SASKATCHEWAN
6%
6
5002
*
ONTARIO
12%
0
1
4
25
25
25
29
37
45
54
ONTARIO
7%
7
5002
*
N.B. &
P.E.I
8%
0
1
3
25
25
31
43
56
QUEBEC
9%
9
9002
CANADIAN TAX TABLES
* Must be programmed into Tax
table 2 ~ 4.
Important!
Be sure you use the federal sales tax data with your provincial sales tax data. Even if your
province use the same tax rate as another province, inputting the wrong data will result incorrect
tax calculations.

16
E
Introducing PCR-T2000
Roll paper
You can use the roll paper to print receipts and a
journal (page 9 ~ 10).
Receipt On/Off key
When you are using the printer for receipt printer, you
can use this key (in the REG and RF
modes only) to turn the printer on and off.
If a customer asks for a receipt while
receipt printing is turned off by this key,
you can issue a post-finalization receipt
(page 45).
Mode key
There are two types of mode keys: the program key
(marked “PGM”) and the operator key (marked “OP”).
The program key can be used to set the mode switch to
any position, while the operator key can select the
REG, CAL and OFF position.
Drawer
The drawer opens automatically whenever you finalize
a registration and whenever you issue a read or reset
report. The drawer will not open if it is locked with the
drawer key.
Drawer lock
Use the drawer key to lock and unlock the drawer.
Multipurpose tray
This tray can always be opened if the locking knob is in
the unlock position.
Use the locking knob to lock and unlock this tray.
Program Operator
key key
RECEIPT
ON/OFF
General guide
This part of the manual introduces you to the cash register and provides a general explanation of its various parts.
display drawer keyboard pop-up display printer cover take-up reel main operator customer
C-A02
OP
PGM
C-A32
Take-up reel
Roll paper
Printer
Pop-up display
(customer display)
Main display
Mode switch
Keyboard
Printer cover
Multipurpose tray
Drawer
Drawer lock

17
Introducing PCR-T2000
E
CAL
REG
OFF
RF
PGM
X
Z
Mode switch
Use the mode keys to change the position of the mode
switch and select the mode you want to use.
Mode Switch Mode Name Description
Z
X
CAL
REG
OFF
RF
PGM
RESET
READ
CALCULATOR
REGISTER
STAND-BY
REFUND
PROGRAM
Reads sales data in memory and clears the data.
Reads sales data in memory without clearing the data.
Use this mode for calculator.
Use this mode for normal registration.
Cash register standing by.
Use this mode to register refund transaction.
Use this mode for cash register programming.

18
Introducing PCR-T2000
E
When the cash drawer does not open!
In case of power failure or the machine is in malfunction,
the cash drawer does not open automatically. Even in
these cases, you can open the cash drawer by pulling
drawer release lever (see below).
Important!
The drawer will not open, if it is locked with a drawer lock key.
Lock/unlock the multipurpose tray
Lock (Red) Unlock
(Green)

19
Introducing PCR-T2000
E
1Amount/Quantity
This part of the display shows monetary amounts.
It also can be used to show the current time.
(The current date is shown in the alphanumeric
display.)
2Item/Key descriptor
When you register an item or key, the item/key
descriptor appears here.
Mode descriptor is also displayed here.
3Number of repeats
Anytime you perform a repeat registration (page 26,
30), the number of repeats appears here.
Displays Main Display Pop-up (customer) display
(alphanumeric + numeric display) (numeric display)
Item registration (by department/PLU)
Repeat registration
Totalize operation
3 "50
AMOUNT
13 2
RECEIPT
ON
RPT
_ 1"34
AMOUNT
15 2
RECEIPT
ON
RPT
3 "50
TOTAL CHANGE
13
_ 1"34
TOTAL CHANGE
45
RECEIPT
ON
RPT
!50
AMOUNT
15 2
!50
TOTAL CHANGE
1
Note that only one digit is displayed for the number
of repeats. This means that a “5”could mean 5, 15 or
even 25 repeats.
4Total/Change indicators
When the TOTAL indicator is lit, the displayed value
is monetary total or subtotal amount.
When the CHANGE indicator is lit, the displayed
value is the change due.
5Receipt on/off indicators
When the register is in “issuing receipt”mode,
under-bar sign is lit on this digit. (REG/RF mode,
during standing-by only)
alphanumeric display

20
Introducing PCR-T2000
E
Keyboard
•Register Mode
1Paper feed key {,|
Hold this key down to feed paper from the printer.
2Receipt on/off key D
Use this key twice to change the status “receipt issue”or
“no receipt.”In case of “receipt issue”, the “RECEIPT
ON”indicator is lit.
3Open key j
Use this key to temporarily release a limitation on the
number of digits that can be input for a unit price.
4Price key :
Use this key to register unit prices for subdepartment.
5PLU/Subdepartment key *
Use this key to input PLU (subdepartment) numbers.
6Discount key \
Use this key to register discounts.
7Minus key m
Use this key to input values for subtraction.
8Non-add/No sale key B
Non-add key: Use this key to print reference number (to
identify a personal check, credit card, etc.) during a
transaction, use this key after some numerical entries.
No sale key: Use this key to open the drawer without
registering anything.
9Premium key ]
Use this key to register premiums.
0Refund key R
Use this key to input refund amounts and void certain
entries.
AMultiplication/For/Date/Time key x
Use this key to input a quantity for a multiplication and
registration of split sales of packaged items. Between
transactions, this key displays the current time and date.
BPost receipt key <
Use this key to produce a post-finalization receipt (page
45).
CError correct/Cancel key e
Use this key to correct registration errors and to cancel
registration of entire transactions.
DClear key C
Use this key to clear an entry that has not yet been
registered.
EClerk number key S
Use this key to sign clerk on and off the register.
FTax shift 1 key t
Use this key without a numeric entry to change the
Taxable 1 status of the next item.
GTax shift 2 key T
Use this key without a numeric entry to change the
Taxable 2 status of the next item.
HTen key pad 0, 1, ~ 9, , ^
Use these keys to input numbers.
IDepartment keys !, ~ %(&, ~ .)
Use these keys to register items to departments.
for the U.S.
3 4 5
12
6 7 8
E F G
9 0 A
B C D
H
I
V
J K
N O
P Q
R S
T
U
789
456
123
000•
54/78 60/84 66/90 72/96
30 36 42 48
6121824
53/77 59/83 65/89 71/95
29 35 41 47
5111723
52/76 58/82 64/88 70/94
28 34 40 46
4101622
51/75 57/81 63/87 69/93
27 33 39 45
3 9 15 21
50/74 56/80 62/86 68/92
26 32 38 44
2 8 14 20
49/73 55/79 61/85 67/91
25 31 37 43
1 7 13 19
OPEN PRICE
%–—#
NS
%+ RF
POST
RECEIPT
ERR.CORR
CANCEL
X/FOR
DATE
TIME
C/AC
C
HELP
RC PD
CH
CHK
MD
ST
CE
RECEIPT
ON/OFF
SUBTOTAL
CA AMT
TEND
PLU/
S.DEPT
DEPT
SHIFT
CLK# T/S1 T/S2
RECEIPT JOURNAL
FEED FEED