CASPR 200 User manual

CASPR 200
CAUTION : Read and save these instructions for proper procedures and operation.
65-00364-VA-00114
*31-88076*
CASPR Group Inc
3100 Monticello Ave #310
Dallas, TX 75205
F1
11
Declaration Of Conformity
Name: CASPR Group Inc
Model: CASPR 200
This device complies with
Part 18 of the FCC Rules.
Responsible Party
CASPR Group Inc
3100 Monticello Ave #310
Dallas, TX 75205
Ph: 214.396.1966
Features:
• NC2i®Cell Technology
• Power Cord
Electrical:
•Input: 100 -240VAC, 50/60 Hz, .5 amp
Size:
• Height: 1.Ċ” (ąċĉā cm); Width: ăċĆā” (ĉċĊā
cm); Length: āĆċāĆ”(ăĉċĆ cm)
• Weight: 2.Āpounds (ĀċĊ kg)
Coverage:
• Up to 200 sq. ft. (20 sq. m)
Hg - LAMP CONTAINS MERCURY
.
Manage in accordance with local laws.
See www.lamprecycle.org
Principles Of Operation
Inspection
When the CASPR 200 is in operation, the NC2i® Cell
(Advanced Oxidation System) is designed to reduce
odors and other contaminants.
NC2i® Matrix
Fastener Locations
Please record the name and phone of your CASPR Group Distributor:
Name
Phone
Please record the serial number of your CASPR 200:
Serial #
WARNING! - UV Lamp operation. Do not operate unless the unit is completely and correctly assembled.
Failure to comply may result in serious eye damage.
CAUTION! - For outlet installation only! Never connect to an extension cord or other power source.
Improper installation could result in electrical shock or short.
LIMITED 1 YEAR WARRANTY
Customer should not repackage and ship the CASPR 200 unit due to possibility of irreparable damage.
For warranty service, please contact your CASPR Distributor for the address of the nearest service center.
WARRANTY INFORMATION
SPECIFICATIONS
What Is Covered By
This Warranty
Limitation Of Liability For
Special, Incidental, Or
Consequential Damages
We Shall Not In Any Case Be
Liable For Special, Incidental Or
Consequential Damages Arising
From Breach Of Expressed Or
Implied Warranties, Conditions,
Guarantees Or Representations,
Breach Of Contract, Negligence
Or Any Other Legal Theory. Such
Excluded Damages Include, But
Are Not Limited To, Loss Of
Profits Or Revenue, And Loss Of
The Use Of The Products, And
Any Loss Caused By Leaks Or
Other Water Damage.
For U.S. Application Only
This Warranty Gives You Specific
Legal Rights, And You May Also
Have Other Rights Which Vary
From State To State. Some States
Do Not Allow Limitations On
Warranties, Or On Remedies For
Breach. In Such States, The Above
Limitations May Not Apply To You.
What Is Not Covered By
This Warranty
Representation Or Warranty Of
Any Kind. All Other Warranties Of
Any Kind, Express Or Implied, Are
Hereby Expressly Disclaimed,
Including Any Implied Warranty Of
Merchantability Or Fitness For A
Particular Purpose.
This equipment has been tested and
found to comply with the limits for
Industrial, Scientific, and Medical
Equipment (ISM), pursuant to Part 18
of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful
interference in a residential
installation. This equipment generates,
uses, and can radiate radio frequency
energy, and if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television,
which can be determined by turning the
equipment o and on, the user is
encouraged to try to correct the
interference by one or more of the following
measures: Reorient or relocate the receiving
antenna. Increase the separation between
the equipment and receiver. Connect the
equipment into an outlet on a circuit
dierent from that to which the receiver is
connected. Consult the Distributor or an
experienced radio/TV technician for help.
How To Obtain
Warranty Service
Customer must contact their
CASPR Distributor and provide
proof of purchase within the above
time periods.
We will repair or replace and
return the product, without charge
and within a reasonable period of
time, subject to the conditions
herein, if its examination shall
disclose any part to be defective in
workmanship or material. If we, in
our discretion, are unable to repair.
Installation And
Maintenance Requirements
This warranty is expressly
conditioned upon proper
installation, operation, cleaning
and maintence, all in accordance
with the Owner’s Manual. Failure to
meet any of these requirements
will void this warranty. Servicing of
your CASPR 200 by parties other
than our authorized
representatives and/or using parts
other than genuine parts will also
void this warranty.
We warrant the CASPR 200
(excluding filters) to the Customer,
subject to the conditions below,
against defects in workmanship or
material, provided that
the products are returned to a
service location within the
following time periods:
• CASPR 200 within one (1) year of
date of purchase.
• NC2i Cell and Lamp within three
(3) months from the date of
purchase
If A Valid Serial Number Is Missing
From The Product, The Warranty
Will Be Voided. Caspr Products
Are Authorized For Sale Through
Caspr Distributors Only.
Warranties Are Voided If A
Product Is Purchased Through
Unauthorized Channels. Exclusion
Of Other Warranties And
Conditions Except As Provided
Herein, We Make No
Missing Serial Numbers
And Unauthorized Channels
Ordinary wear and tear shall not
be considered a defect in
workmanship or material. These
warranties do not apply to filters
nor for loss or damage caused
by accident, fire, abuse, misuse,
improperinstallation, leaking,
modification,misapplication, or by
any repairs otherthan those
provided by our authorized
Service Center. This warranty is
nontransferable.
For Canadian Application Only
Exclusion of Subsequent Owners:
Except as otherwise required by
applicable legislation, this warranty is
not transferable. This warranty gives
you specific legal rights and you may
also have other rights which vary from
province to province. Some provinces
and territories do not allow limitations
on warranties, or onremedies for
breach. In such provinces or territories,
the above limitations may not apply to
you. If any provision of this warranty or
part thereof is held by a court of
competent jurisdiction to be invalid,
illegal, or unenforceable, the validity,
legality and enforceability of the
remaining provisions or parts thereof
will not in any way be aected
or impaired within the jurisdiction of
that court. This entire warranty shall
continue to be valid, legal and
enforceable in any jurisdiction where a
similar determination has not been
made.
This warranty is provided by
CASPR Group Inc 3100 Monticello ave,
#310 Dallas, TX 75205.
Service
Every eort is made to ensure customers
receive an up-to-date instructions manual
on the use of our products; however, from
time to time, modifications to our
products may without notice make the
information contained herein subject to
alteration.
Remove unit from shipping carton.
Remove all protective materials.
Check for loose or broken parts due to shipping damage.
Read 0$%/ŏ +1)!*0 thoroughly prior to installation.
Determine placement location for the unit, follow
installation instructions in this +1)!*0.
5
4
3
2
1

AA
D
G
B
E
F
C
CAUTION : Read and save these instructions for proper procedures and operation.
65-00364-VA-00114
*31-88076*
CASPR Group Inc
3100 Monticello Ave #310
Dallas, TX 75205
CASPR Installation Guide Changing The UD
D
Bulb Parts View
Maintenance
Disconnect the power supply to the CASPR 200.
Wipe CASPR 200 with a damp cloth.
Use a vacuum with hose to clean the NCC Cell On
either side of the CASPR 200.
When CASPR 200 is free from moisture, return unit
to PTAC and plug power supply back into outlet.
PART
ACover
B
UV Bulb
C
D
Cover Screws
E
NCC Cell
F
UV Bulb Power Connection
G
Mounting Holes
WARNING: Disconnect Power from the CASPR 200
before servicing.
Return cover and
replace screws.
Remove the cover by lifting
away from the base.
Remove the four (4) cover screws from the
sides of the CASPR 200.
Unplug the UV bulb from
the power supply.
Replace UV b1(b by
reversing steps 3 and 4.
Remove the "+)ŏ".+)ŏ0$!ŏ!* ŏ+"ŏ0$!ŏ
ŏ1(ċ
1
2
3
4
1
2
3
4
5
6
Material Included:
• 1 - CASPR Unit
•ą- self-tapping metal screws
Additional Material:
• 6” heavy-duty Velcro/double-sided tape
• 12’ x ½ inch flex
• 10 - 1-hole straps/clips for flex
• 2 - straight flex connectors
• 2 - 90 flex connectors
• 1 - Junction box (handy box)
• 1 - Duplex receptacle
• 1 - Duplex receptacle cover
• 3 - 12’ #12 AWG wire black, white, and green
• 2 - ½ inch round rubber grommets
• 10 - “Sticky backs” zip tie holders
Installation:
1. Go over mounting locations/options with the customer (Exposed or Concealed)
2. The CASPR unit should be located so that it can be accessible for service or replacement.
3. Once the location is decided, attach the CASPR unit to the Cab walls or Cab ceiling using
(Recommended Velcro, double-sided tape, or screws.)
4. Install the outlet on the car top utilizing the existing 110-volt circuitry.
5. Once the outlet and unit are installed run power cable, * ŏ,(1#ŏ1*%0ŏ%*0+ŏ+10(!0.
6. *!ƫ0$!ƫƫ1*%0ƫ%/ƫ,(1##! ƫ%*Čƫ0$!ƫƫ(),ƫ/$+1( ƫ!ƫ%((1)%*0! ċ
7. Clean the cab and cartop and turn over for use.
Tools:
No special tooling required besides basic hand and power tools with assorted drill bits
Time:
2 hours per unit
1
2
3
4
5
6
7
+)