Castleton Home DD-HBQ8626 User manual

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 1
DD-HBQ8626
Tufted Headboard Queen
Product Instructions for:

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 2
DD-HBQ8626
Tufted Headboard Queen
Before beginning assembly, separate all parts and carefully study the parts
diagrams below. Review all parts and hardware before disposing of any
packaging. You may receive extra hardware with your unit. Call Customer
Service for missing hardware.
Before beginning assembly, separate all parts and carefully study the parts
A: Headboard Cushion (1)
B: Left Leg (1)
C: Right Leg (1)
1: Allen Wrench (1)
2: Bolt Dia. 1/4”x2”L (8)
3: Flat Washer (8)
4: Spring Washer (8)
Parts list

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 3
DD-HBQ8626
Tufted Headboard Queen
Figure 1
Step 1
Unpack and lay parts on a clean,
padded surface like a carpet or
blanket. Check that you have all
parts indicated on the front page.
Lift the velcro strip cover found on
Headboard Cushion (A) and take
out Left Leg (B) and Right Leg
(C).
Close the velcro strip cover.
Figure 2
Step 2
Attach Left Leg (B) and Right Leg
(C) to the back of Headboard
Cushion (A) as shown in Figure 2.
Use Bolts (2), Spring Washers (4)
and Flat Washers (3) to connect
Left Leg (B) and Right Leg (C) to
Headboard Cushion (A).
Tighten Bolts (2) using Allen
Wrench (1).
Assembly Instructions
A
C
B
BACK
2
3
1
A
C
B
BACK
BACK
BACK
4

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 4
DD-HBQ8626
Tufted Headboard Queen
Figure 3
Step 3
If at any time you need to
adjust he height of this
product, please follow the
instructions below:
Remove the wood block that
controls product height as
shown in Figure 3.
Slide Left Leg (B) and Right
Leg (C) upward to decrease
product height.
Repeat Step 3 for all legs of
bed.
Figure 4
Step 4
Double check to be sure that
Bolts (2) are securely
tightened.
Now your Tufted Headboard
Queen is ready to use!
BACK
BACK
B
C