CB2 Dockside User manual

1
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Made in Vietnam - r05 Page 1 of 2
dockside DINING TABLE
components
hardware
tools required
Thank you for purchasing the Dockside Dining Table.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well as
the individual components to this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are recommended to safely assemble this
product.
Missing hardware?
Please call 800.606.6387 for replacements.
8 - bolts
1 - tabletop
8 - flat
washers
8 - spring
washers
hex wrench
(included)
2 - legs
leg A1
With the assistance of another adult, place tabletop
upside down on a clean, padded surface. Attach
leg “A1” to the tabletop corner bracket with 2 bolts,
2 spring washers and 2 flat washers. Secure
each bolt with the hex wrench.
2 - legs
A1
B1
A2
B2

2 3
Made in Vietnam - r05 Page 2 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Periodically, tighten bolts as necessary.
Left unprotected, this table will weather and patina to a silvery grey.
During normal weathering, wood may crack slightly due to changes in the moisture; this does not effect the structural integrity
of the furniture.
Store or keep covered during inclement weather and when not in use.
To preserve the original finish avoid leaving in direct sunlight for extended periods of time.
dockside DINING TABLE
With assistance, place table upright. Assembly is
now complete.
Repeat Step 1 for remaining 3 legs, positioning legs
as shown.
leg
leg
leg
A2
B1
B2