CB2 Rodney Nightstand User manual

(We recommend the use of hand tools instead of power tools)
Made in Vietnam - r04 Page 1 of 3
rodney NIGHTSTAND
hardware
tools required
Thank you for purchasing the Rodney Nightstand This
page lists all the contents included in the box. Please take
the time to identify the hardware as well as the individual
components to this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
Missing hardware? Please call
800.606.6387 for replacements.
1 - top panel
8 - spring
washers
8 - flat
washers
Customer Service 800.606.6252 I Latest instructions available on www.cb2.com
components
1 - bottom panel 1 - back panel
8 - bolts 8 - screws
philips head screwdriver
2 - side panels
(1 left, 1 right)
1 - drawer front
1 - drawer back
2 - drawer side
(1 left, 1 right)
1 - drawer bottom 4 - legs
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer.
LR

Made in Vietnam - r04 Page 2 of 3
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1
NOTE: Do not over
tighten the bolts.
2
3 4
rodney NIGHTSTAND
Position top panel as shown. Fit pre-assembled
dowels of left and right side panels into
corresponding holes of top panel. Secure left and
right side panels to top panel with 4 flat
washers, 4 spring washers and 4 bolts as
shown, using a phillips head screwdriver.
right side
panel
left side
panel
A. Slide back panel into grooves of left and right
side panels.
B. Fit pre-assembled dowels of left and right side
panels into corresponding holes of bottom panel.
Secure left and right side panels to bottom
panel with 4 flat washers, 4 spring washers and
4 small bolts, using a screwdriver.
back panel
NOTE: Make sure left
and right side panels are
assembled with grooves
facing back as shown
Attach 2 legs to assembled unit by turning each
leg clockwise as shown.
bottom panel
top panel
A
B
B
leg
Fit pre-assembled dowels of drawer front into
corresponding holes of left drawer side. Secure
drawer front to left drawer side with 2 screws
as shown, using a phillips head screwdriver. Do
not over tighten the screws.
drawer
front
left drawer
side
NOTE: Do not over
tighten the screws
NOTE: Make sure glide
is positioned as shown
L

rodney NIGHTSTAND
Made in Vietnam - r04 Page 3 of 3
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
5 6
7 8
right
drawer
side
Fit pre-assembled dowels of drawer
back and front into corresponding
holes of right drawer side. Secure
drawer side with 4 screws as shown
using a screwdriver.
drawer
assembly
With the assistance of another adult, position unit upright.
Fit drawer glides of drawer into corresponding drawer
glides of assembly as shown. Firmly push drawer into
assembly until the glides are securely engaged.
Assembly is now complete.
NOTE:
Make sure glides are
pulled out of the case, and
ball bearings are at the front of
the extended glides
NOTE: Make sure to
keep drawer level so
as not to damage glides
during assembly
Fit pre-assembled dowels of drawer side into
corresponding holes of drawer back. Secure
drawer back to drawer side with 2 screws
using a screwdriver.
Slide drawer bottom into corresponding grooves
of drawer assembly.
drawer
back
drawer
bottom
R
L
L