CB2 Shake Nightstand User manual

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Made in Vietnam - r04 Page 1 of 4
shake NIGHTSTAND
Thank you for purchasing the Shake Nightstand. This
page lists all the contents included in the box. Please take
the time to identify the hardware as well as the individual
components to this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are recommended to safely assemble this product.
components
hardware
tools required
Missing hardware? Please call 800.606.6387 for replacements.
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
1 - top panel
1 - drawer front
1 - back panel
1 - bottom panel
2 - side panels
(1 left, 1 right)
1 - drawer bottom
14 - wood
dowels
10 - bolts 8 - screws
2 - drawer sides
(1 left, 1 right)
1 - drawer back

3 4
Insert 4 wood dowels into bottom panel.
With assistance of another adult, fit dowels of left
and right side panels into corresponding holes of
back panel as shown.
1 2
Insert 2 wood dowels into left and right side
panels as shown.
Insert 6 wood dowels into top panel.
shake NIGHTSTAND
Made in Vietnam - r04 Page 2 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
bottom
panel
left and right
side panels
top panel
right side
panel
left side
panel
back
panel

7 8
5 6
With assistance, fit dowels of top panel into
corresponding holes of assembly and secure with 6
bolts. Secure, but do not over tighten, bolts with a
phillips head screwdriver.
Fit dowels of bottom panel into corresponding holes
of assembly and secure with 4 bolts.
shake NIGHTSTAND
Made in Vietnam - r04 Page 3 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
top panel
Attach left drawer side to drawer front with 2
screws. Secure, but do not over tighten, screws
with a screwdriver.
drawer front
left drawer
side
Fit drawer bottom into corresponding grooves of
drawer assembly.
drawer
bottom
bottom
panel
Note: Do not over
tighten the bolts

11
9 10
shake NIGHTSTAND
Made in Vietnam - r04 Page 4 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Attach drawer back to left drawer side with 2
screws.
drawer
back
Attach right drawer side to drawer assembly with
4 screws.
right drawer
side
cleaning and care
Clean surfaces with a dry or damp soft
cloth. Do not use abrasive cleaners.
With assistance, position unit upright. Fit drawer glides of drawer into
corresponding drawer glides of case assembly. Make sure drawer
glides are securely engaged.
Assembly is now complete.
NOTE: Make sure glides are pulled
out of the case and ball bearings are
at the front of the extended glides.
To prevent damage to glides,
keep drawer assembly level
during installation.