CB2 SMART User manual

1
hardware
components
tools required
2 - side frames
(1 left, 1 right)
Missing hardware?
Please call 800.606.6387for replacements.
allen wrench (included)
A
Thank you for purchasing the Smart C Table. This page
lists all the contents included in the box. Please take the
time to identify the hardware as well as the individual
components to this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
3 - crossbars
6 - brackets
12 - bolts 4 - levelers6 - spring
washers
4 - bumpers
A. Fit 3 crossbars over brackets of left side
frame as shown.
B. Secure each crossbar to left side frame with
1 bolt.
2
left and right
side frames
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com Page 1 of 2
A. Place left and right side frames onto a clean,
padded surface. Attach 3 brackets to left and
right side frames with 1 bolt and 1 spring
washer per bracket as shown. Secure, but do not
over tighten, bolts using an allen wrench.
B. Attach 2 levelers to left and right side frames
by turning each leveler clockwise.
leveler
bracket
NOTE: Do not over
tighten the bolts
NOTE: Make sure holes of each
bracket are positioned towards
the bottom during assembly
left side
frame
crossbar
1 - tabletop
B
A
B
smartC TABLE / TABLE / MESA

3 4
right side
frame tabletop
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Made in Taiwan - r06 Page 2 of 2
A. Fit brackets of right side frame into crossbars
as shown.
B. Secure each crossbar to right side frame with
1 bolt.
A. Place assembled unit upright. Adhere 4
bumpers to the assembled frame as shown.
B. Carefully place tabletop onto frame. Make sure
tabletop is securely supported by frame/bummers.
Assembly is now complete.
bumper
NOTE: Please do the following if your table is
not level.
With the assistance of another adult, adjust
levelers of each leg as necessary.
leg
leveler
method to adjust levelers on table
A
B
A
B
cleaning & care
If there is a spill on the marble, immediately use a damp
cloth to wipe the marble since it is extremely porous.
Spot clean with mild detergent and water. Be aware
that color and natural veining will vary with each piece.
Coasters must be used to protect from heat and water.
smartC TABLE / TABLE / MESA