Chauvet LEG-6000 Manual

Appendix
DMX-DMW6000X User Manual 15 Revision: 2005-10-19/14:22
DMX Channel Values
16 Bit Movement
CHANNEL VALUE FUNCTION
1
000 255 Dimmer Closed > Open (0-100%)
2
000 001
002 007
008 063
064 071
072 127
128 135
136 191
192 199
200 253
254 255
Shutter/Strobe
Blackout
Open
Strobe: Slow > Fast (max 7fps)
Open
Pulse Strobe: Dark > Bright & Slow > Fast
Open
Pulse Strobe: Bright > Dark & Slow > Fast
Open
Random Strobe: Slow > Fast
Open
3
000 017
018 035
036 051
052 071
072 089
090 107
108 127
128 187
188 195
196 255
Color Wheel
White (Open)
Red
Blue
Green
Purple
5000K
3200K
Rainbow effect clockwise: Fast > Slow
Stop
Rainbow effect counter-clockwise: Slow > Fast
4
000 255 Cyan 0% > 100%
5
000 255 Magenta 0% > 100%
6
000 255 Yellow 0% > 100%
7
000 007
008 015
016 023
024 031
032 039
040 047
048 055
056 063
064 071
072 079
080 087
088 095
096 103
104 111
112 119
120 127
128 135
136 143
144 151
152 159
160 167
168 175
176 183
184 191
192 199
200 207
208 215
216 223
224 231
232 239
240 247
248 255
Color Macros
None
Macro01
Macro02
Macro03
Macro04
Macro05
Macro06
Macro07
Macro08
Macro09
Macro10
Macro11
Macro12
Macro13
Macro14
Macro15
Macro16
Macro17
Macro18
Macro19
Macro20
Macro21
Macro22
Macro23
Macro24
Macro25
Macro26
Macro27
Macro28
Macro29
Macro30
Macro31
Continued on next page…

Appendix
DMX-DMW6000X User Manual 16 Revision: 2005-10-19/14:22
CHANNEL VALUE FUNCTION
8
000 063
064 127
128 143
144 255
Beam Effect
Full Beam
Frost Filter
Flat and wide beam effect at 0°
Flat and wide beam effect 90° adjustment
9
000 255 Zoom 10° > 30°
10
000 255 Pan 0° > 570° ( 128 = center)
11
000 255 Tilt 0° > 270° (128 = center)
12 000 255 Pan (Fine)
13 000 255 Tilt (Fine)
14
000 007
008 063
064 127
128 191
192 255
Control
Utilizes an internal ramp to provide smooth Pan/Tilt
movement and adjustment
Disables the internal ramp to provide faster Pan/Tilt
movement and adjustment
Color calibration
Pan: Color Wheel
Tilt: Cyan
Pan (Fine): Magenta
Tilt (Fine): Yellow
( See Appendix, Color Calibration)
Save calibration settings after 3 seconds
Reset all motors after 3 seconds (does not reset calibration)
15
000 047
048 095
096 159
160 207
208 255
Lamp ON/OFF
Standby
Hold 3 seconds for Lamp ON
Standby
Hold 3 seconds for Lamp OFF
Standby
8 Bit Movement
In the 8 bit Pan/Tilt resolution setting both (FINE) channels is removed. All other channel parameters
remain the same as in the “DMX Channel Values”table.
CHANNEL FUNCTION CHANNEL FUNCTION CHANNEL FUNCTION
1 Dimmer 6 Yellow 11 Tilt
2 Shutter/Strobe 7 Color Macro 12 Control
3 Color Wheel 8 Beam 13 Lamp ON/OFF
4 Cyan 9 Zoom
5 Magenta 10 Pan
Dip Switches (settings explained)
DIP SWITCH EVENT NOTES
All Off
The lamp will strike first. If striking of the lamp succeeds, in approximately
15 seconds the fixture’s motors will be powered and initialized. If the lamp
does not strike, the remainder of the fixture will not initialize and you will
not have control of the fixture. Please wait 15 minutes before re-
starting the fixture, otherwise perform a service check.
This is the default setting on the fixture and
helps in reducing the amount of striking or
inrush current used by the fixture upon startup.
1-On Lamp and motors are powered at the same time. Will consume the most amount of inrush current
in the startup phase.
2-On Only the lamp will turn on in the fixture.
1-On, 2-On Only the lamp will turn on in the fixture
3-On This switch will terminate the dmx connection. Use only at the end of a DMX daisy chain.