Chauvet Atmos User manual

User Manual

Edition Notes
Atmos™ User Manual Rev. 1
Edition
Notes
The Atmos™ User Manual Rev. 1 covers the description, safety precautions, installation,
programming, operation, and maintenance of the Atmos™. CHAUVET® released this edition of
the Atmos™ User Manual in June 2014.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted
triangle, and all other trademarks in this manual pertaining to services, products, or marketing
statements are owned or licensed by CHAUVET®. Any other
product names, logos, brands,
company names, and other trademarks featured or referred to within this document are the
property of their respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2014 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Use
CHAUVET® authorizes its customers to download and print this manual for professional
information purposes only. CHAUVET® expressly prohibits the u
sage, copy, storage,
distribution, modification, or printing of this manual or its content for any other purpose without
written consent from CHAUVET®.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or maintaining this product should completely
read through the guide that shipped with the product, as well as this manual, before installing,
operating, or maintaining this product.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all respects.
However, CHAUVET® assumes no responsibility for any errors or omissions in this document.
CHAUVET® reserves the right to revise and make changes to the content of this document
without obligation that CHAUVET® notify any person or company of such revision or changes.
This does not in any way constitute a commitment by CHAUVET® to make such changes.
CHAUVET® may issue a revision of this manual or a new edition to incorporate such changes.
Document
Revision
The Atmos™ User Manual Rev. 1 is the first edition of this manual. Go to
www.chauvetprofessional.com for the latest version.
Author
Date
Editor
Date
D. Couppe
6/12/14
A. Leon
6/12/14

Table of Contents
Atmos™ User Manual Rev. 1 -i-
Table of Contents
1. Before You Begin......................................................................................................................................1
What Is Included...........................................................................................................................................................1
Claims..........................................................................................................................................................................................1
Manual Conventions ....................................................................................................................................................................1
Symbols.......................................................................................................................................................................................1
Product At A Glance .....................................................................................................................................................2
Safety Notes .................................................................................................................................................................2
Personal Safety............................................................................................................................................................................2
Mounting And Rigging..................................................................................................................................................................2
Power And Wiring ........................................................................................................................................................................2
Operation.....................................................................................................................................................................................2
2. Introduction...............................................................................................................................................3
Description....................................................................................................................................................................3
Features........................................................................................................................................................................3
Overview.......................................................................................................................................................................4
Dimensions...................................................................................................................................................................5
3. Setup..........................................................................................................................................................6
AC Power......................................................................................................................................................................6
AC Plug........................................................................................................................................................................................6
Resetting the Breaker ..................................................................................................................................................................6
DMX Linking..................................................................................................................................................................6
DMX Personalities........................................................................................................................................................................6
Mounting.......................................................................................................................................................................7
Orientation ...................................................................................................................................................................................7
Rigging.........................................................................................................................................................................................7
Procedure ....................................................................................................................................................................................7
4. Operation...................................................................................................................................................8
Control Panel Description.............................................................................................................................................8
Control Options.............................................................................................................................................................8
Programming ................................................................................................................................................................8
Preparing for Operation................................................................................................................................................................8
Startup .........................................................................................................................................................................................8
Menu Map.....................................................................................................................................................................9
Configuration ..............................................................................................................................................................10
Starting Address.........................................................................................................................................................................10
Setting the Output Volume.........................................................................................................................................................10
Activating the Fluid Sensor ........................................................................................................................................................10
Timer Mode................................................................................................................................................................................11
Manual Mode .............................................................................................................................................................................11
Timer Mode Parameters ............................................................................................................................................................11
5. Technical Information.............................................................................................................................12
Hazer Maintenance.....................................................................................................................................................12
Storage ......................................................................................................................................................................................12
6. Technical Specifications.........................................................................................................................13
Returns .......................................................................................................................................................................14
Contact Us..................................................................................................................................................14

Table of Contents
-ii- Atmos™ User Manual Rev. 1

Before You Begin
Atmos™ User Manual Rev. 1 -1-
1. BEFORE YOU BEGIN
What Is
Included
•Atmos™
•Neutrik® powerCON® power cord
•Warranty Card
•Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not CHAUVET®. Failure
to report damage to the carrier immediately may invalidate your claim. In addition, keep the box
and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols
Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Before You Begin
-2- Atmos™ User Manual Rev. 1
Product At A
Glance
Use on Dimmer
x
Auto Programs
x
Outdoor Use
x
Fixed Voltage (120 V)
P
Sound-Activated
x
Circuit Breaker
P
DMX
P
User-Serviceable
x
Master/Slave
x
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained CHAUVET® certified technicians. Do
not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
•Do not drink or become in contact with the fog fluid. If you do, call your local emergency
service (911 in the US) for help.
Mounting And
Rigging
•This product is not intended for permanent installation.
•This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose
this product to rain or moisture.
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•Make sure there are no flammable materials close to this product while it is operating.
•When hanging this product, always secure to a fastening device using a safety cable
(not included).
Power And
Wiring
•Make sure the power cord is not crimped or damaged.
•Always make sure you are connecting this product to the proper voltage in accordance
with the specifications in this manual or on the product’s specification label.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage to the housing, fluid tank, or cables. Have
the damaged parts replaced by an authorized technician at once.
•Be sure that no ventilation slots on the product’s housing are blocked.
•Never carry the product from the power cord or any moving part. Always use the handles.
•The fog exits the nozzle at a very high temperature. Keep a minimum distance of
6.5 ft (2 m) from the nozzle to the nearest object.
•The product’s nozzle is very hot during operation and it remains hot for a long time after
operation has stopped.
•The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at a
higher temperature.
•In the event of a serious operating problem, stop using this product immediately!
•Do not add perfume, alcohol, gasoline, or any other flammables to the fog fluid.
•Only use CHAUVET® water-based High Density Fog Fluid (HDF) and Quick Dissipating
Fog Fluid (QDF).
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.

Introduction
Atmos™ User Manual Rev. 1 -3-
2. INTRODUCTION
Description
The Atmos™ is a professional-level fogger with excellent output and tank capacity. The Atmos™
features a 1.6 kW heater, tough housing for product longevity, a removable control panel, an
industry-standard Neutrik® powerCON™ power input connection, and 3- and 5-
pin DMX
input/output connections. It only works with High Density Fog Fluid (HDF) and
Quick Dissipating
Fog Fluid (QDF) available from CHAUVET® to create various effects.
Features
•Continuous output at 10%
•40,000 CFM fog output for intense, large effects
•9.5 l fluid tank for reliability in production
•1.6 kW fluid heater for voluminous, heavy bursts of fog
•Strong, sturdy construction for numerous production types
•DMX control for ease of use in production situations
•3- and 5-pin DMX input/output connections

Introduction
-4- Atmos™ User Manual Rev. 1
Overview
Power In
Power Switch
DMX
Out
DMX In
Control Panel
Front View
Rear View
Side View
Bracket
Adjustment Knob
Output Nozzle
Safety Cable Loop
Safety Cable Loop
Breaker
DMX In
DMX
Out
Fluid Tank

Introduction
Atmos™ User Manual Rev. 1 -5-
Dimensions
25.98 in
660 mm
15.0 in
381 mm
15.0 in
381 mm

Setup
-6- Atmos™ User Manual Rev. 1
3. SETUP
AC Power
Each Atmos™ has a fixed power supply that works with an input voltage of
120 VAC, 60 Hz. To determine the power requirements for each Atmos™, refer to the label
affixed to the product. You can also refer to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the CHAUVET® website
www.chauvetlighting.com/download/pro.
Always connect this product to a protected circuit with an appropriate electrical ground
to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer
circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Atmos™ comes with a power input cord terminated with a Neutrik® powerCON® A
connector on one end and an Edison plug on the other end (U.S. market). If the power
input
cord that came with your product has no plug, or if you need to change the Edison plug, use the
table below to wire the new plug to the power input cord.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Resetting the
Breaker
The Atmos™ uses a resettable circuit breaker. Follow the instructions below to reset.
Disconnect the product from the power before resetting the breaker.
This product is equipped with a resettable circuit breaker. If the breaker trips, all sections of this
product will lose power.
1. Disconnect the product from power.
2. Allow the product to cool for 15 minutes.
3. After 15 minutes, try to reset the breaker by flipping it to the ON position.
4. Connect the product to power and continue using as recommended.
If the breaker does not reset (the breaker button will not remain latched), contact
CHAUVET® immediately.
DMX Linking
You can link the Atmos™ to a DMX controller using a 3- or 5-pin DMX connection. If using
other DMX compatible products with the Atmos™, you can control each individually with a
single DMX controller.
DMX
Personalities
The Atmos™ uses a 3- or 5-pin DMX data connection for its 1-channel DMX personality.
•Refer to the Introduction chapter for a brief description of each DMX personality.
•Refer to the Operation chapter to learn how to configure the Atmos™ to work in these
personalities.
•The DMX Values section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards or the DMX
cables needed to link this product to a DMX controller, download the DMX Primer from the
CHAUVET® website: www.chauvetlighting.com/download/pro.

Setup
Atmos™ User Manual Rev. 1 -7-
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET® line of
mounting clamps, go to www.trusst.com/productcategory/accessories-clamps/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
CHAUVET® recommends using the following general guidelines when mounting this product.
•When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
•When hanging this product, always secure to a fastening device using a safety cable (such
as CH-05 from CHAUVET®).
Procedure
The Atmos™ comes with rubber feet for floor mounting and a yoke to which you can attach
mounting clamps for hanging.
You must supply your own mounting clamps. Make sure the
structure and the clamps (such as CLP-15 from CHAUVET®)
are capable of supporting the
weight of this product. Use at least one mounting point per product.
Mounting Diagram
When using only one mounting clamp, be sure to use a clamp with a captive bolt to
prevent accidental loosening.
Floor Mounting
Overhead Mounting
Mounting Clamp
Safety Cable
Rubber Feet (x4)
for floor mounting

Operation
-8- Atmos™ User Manual Rev. 1
4. OPERATION
Control Panel
Description
Button
Function
<FUNCTION>
Enters the programming mode
<VOLUME>
Controls the pump to modify the output volume
<TIMER>
Starts the timer controlled operation
<MANUAL>
Allows momentary fog output for as long as the button is held
down
<UP>
Navigates upward through the menu list or increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list or decreases the
numeric value when in a function
Control Options
You can set the Atmos™ starting address in the 001–512 DMX range. This enables
control of up to 512 products in the 1-channel personality.
Removable Control
Panel
To operate or control the Atmos™ from a distance, the control panel can be removed
using the 2 thumb screws on each side of the panel; it has a 15 foot cable that is already
installed and can be extended using a standard 5-pin DMX cable up to 200 feet.
Do not exceed 200 feet when extending the control panel cable.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
Only use CHAUVET® water-based High Density Fog Fluid (HDF) and Quick
Dissipating Fog Fluid (QDF).
Preparing for
Operation
To prepare the Atmos™ for operation, perform the following steps.
1. Withdraw the fluid tank from its compartment and remove its cap.
2. Verify that the two plastic hoses attached to the cap are in place and in good
condition.
3. Pour CHAUVET® (HDF or QDF) fog fluid into the tank and replace the cap.
4. Return the tank back to its compartment in the Atmos™.
5. Make sure the plastic hose entering the Atmos™ from the fluid tank cap is not bent
or kinked.
6. Connect the Atmos™ to power and Warming Up shows on the display during the
heating-up process. After approx. 8 minutes, the display changes to Ready To
Atmos when the machine is ready to output fog.
In any of the operation modes, the display must show Ready To Atmos to output
fog.
Startup
The Atmos™ has an On/Off switch. Make sure that the switch is in the OFF position
before plugging the Atmos™ into power.
To start up the Atmos™, do the following:
1. Prepare for operation, as described in Preparing for Operation.
2. Press <VOLUME>.
3. Adjust fog output volume by using <UP> or <DOWN>.
Repeat the startup procedure after transporting the Atmos™ or after refilling with
fluid.

Operation
Atmos™ User Manual Rev. 1 -9-
Menu Map
Atmos™ Opening Screen
CHAUVET
Version X.X
CHAUVET
AC-120V 60Hz
Warming Up
(only appears if Atmos™ is cold)
Ready To Atmos
CHAUVET
Atmos™ Functions Menu
Interval Set
CHAUVET
1–200s
Duration Set
CHAUVET
1–200s
Timer Out
CHAUVET
1–100%
Volume Out
CHAUVET
1–100%
DMX512Add.
CHAUVET
1–512
Fluid Sensor
CHAUVET
ON–OFF
Channel Function Value Percent/Setting
1 Volume
000
ó
005
006ó255
No function
0–100%

Operation
-10- Atmos™ User Manual Rev. 1
Configuration
To set the product in DMX mode to control with a DMX controller.
1. Connect the Atmos™ to power and turn power switch to ON. Warming Up shows on
the display during the heating-up process. After approx. 8 minutes, the display
changes to Ready To Atmos when the machine is ready to output fog.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
The Atmos™ uses up to 1 DMX channel in its DMX mode, which defines the highest
configurable address to 512.
If unfamiliar with DMX, download the DMX Primer from
www.chauvetlighting.com/download/pro.
To select the starting address, do the following:
1. Press <FUNCTION> repeatedly until DMX512 Add. shows on the display.
2. Use <UP> or <DOWN> to select the starting address 1–512.
Make sure that the starting addresses on the various products do not overlap due
to the personality setting.
Setting the Output
Volume
To adjust the volume of the fog output, do the following:
1. Press <FUNCTION> repeatedly until Volume Out shows on the display.
2. Use <UP> or <DOWN> to select the desired percent output volume (1–100%).
3. Press <VOLUME> to initiate this output.
4. Press <VOLUME> again to trigger the fog output with this output volume setting.
After turning off the Atmos™, this output volume setting will remain in its memory.
To change the output volume for subsequent operation of the Atmos™, simply
repeat the steps above.
Activating the Fluid
Sensor
The Atmos™ has a fluid sensor that can detect when the amount of fluid in the fluid tank
has reached a low level.
To activate the fluid sensor, do the following.
1. Press <FUNCTION> repeatedly until Fluid Sensor shows on the display.
2. Use <UP> or <DOWN> to select ON.
Note: Selecting OFF turns off the fluid sensor.
While operating the Atmos™, make sure there is adequate fog fluid in the machine
to prevent pump and heater damage. You can check the fluid level in the tank
visually or by activating the fluid sensor. When the fluid level becomes low, simply
add more fluid to continue using the Atmos™.

Operation
Atmos™ User Manual Rev. 1 -11-
Timer Mode
When in Timer mode, the Atmos™ will produce fog in pre-configured time intervals
defined by the Interval Set and Duration Set menu options. In addition, the output volume
during Timer mode is set by the Timer Out menu option. See the Timer Mode Parameters
section for details about how to configure these parameters.
To operate in Timer mode, do the following:
1. Press <TIMER> and the display will show a countdown of the interval timer.
2. When the counter reaches zero (0), the Atmos™ will start producing fog.
3. The fog output duration during Timer mode is set by the Duration Set menu option.
4. The fog output volume during Timer mode is set by the Timer Out menu option.
5. This cycle will repeat itself until you press <TIMER> again or until the Atmos™ runs
out of fluid.
Manual Mode
In the Manual mode, the Atmos™ will output fog for as long as <MANUAL> remains
pressed. The output volume will be at 100% full fog output.
To operate in Manual mode, do the following:
•Press <MANUAL>.
This mode will continue until you release <MANUAL> or until the Atmos™
runs out of
fluid.
Timer Mode
Parameters
These parameters determine the intervals and output volume for the Atmos™ while in
Timer mode.
To configure these parameters do the following.
1. Press <FUNCTION> repeatedly until Interval Set shows on the display.
2. Use <UP> or <DOWN> to select the time in seconds (1–200s) between fog output.
3. Press <FUNCTION> repeatedly until Duration Set shows on the display.
4. Use <UP> or <DOWN> to select the time in seconds (1–200s) for the duration of the
fog output.
5. Press <FUNCTION> repeatedly until Timer Out shows on the display.
6. Use <UP> or <DOWN> to set the fog output volume (1–100%).

Technical Information
-12- Atmos™ User Manual Rev. 1
5. TECHNICAL INFORMATION
Maintenance
Do not allow the Atmos™ to become clogged. After every 40 hours of continuous
operation, use CHAUVET® Fog Cleaner Quart (FCQ) through the system to prevent the
accumulation of particulate matter in the heating element.
The recommended cleaning procedure is as follows.
•Unplug the product from power.
•Empty all fluid from the machine.
•Add cleaning solution to the tank.
•Connect the product to power and allow it to warm up.
•Run the product in a well-ventilated area until the tank is empty.
•Refill with fog fluid to continue using the Atmos™
. Run the machine briefly to clear any
cleaning solution from the pump and heater.
FCQ (Fog Cleaner Quart) was specifically developed by CHAUVET® to clean your
Atmos™. Make sure you use FCQ regularly to increase the life of your fogger.
Do not spin the fans using compressed air because you could damage the fogger.
Storage
Before storing the Atmos™, run FCQ through the system as described in the cleaning
procedure above; however, only follow steps 1 through 5. Do not refill the tank with fluid if
storing the Atmos™
. Cleaning the system prior to storage will help prevent any particles
from condensing inside the pump or heater while not in use.
Test run your Atmos™ on a monthly basis to achieve the best performance.

Technical Information
Atmos™ User Manual Rev. 1 -13-
6. TECHNICAL SPECIFICATIONS
Dimensions and
Weight Length Width Height Weight
15 in (381 mm)
25.9 in (660 mm)
15 in (381 mm)
32.4 lb (14.7 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type Range Voltage Selection
Model-specific
120 VAC, 60 Hz
Fixed
Parameter 120 VAC, 60 Hz
Consumption
1,480 W
Current
12.39 A
Breaker
15 A
Power I/O
U.S./Canada
Worldwide
Power input connector
Neutrik® powerCON® A
Neutrik® powerCON® A
Power cord plug
Edison (U.S.)
Local plug
Operation/Capacity/
Consumption Heat-up Time Tank Capacity Fluid Consumption
8 min
2.5 gal (9.5 l)
140 ml/min
Misc.
Output
40,000 cfm
Thermal
Max. External Temperature
Cooling System
104 °F (40 °C)
Fan-Assisted Convection
DMX
I/O Connectors Connector Type Channel Range
3- and 5-pin XLR
Sockets
1
Ordering
Product Name Item Code UPC Number
Atmos™
05070859
781462212070

Returns
You must send the product prepaid, in the original box, and with the original packing and
accessories. CHAUVET® will not issue call tags.
Call CHAUVET® and request a Return Merchandise Authorization (RMA) number before
shipping the product. Be prepared to provide the model number, serial number, and a
brief description of the cause(s) for the return.
Clearly label the package with an RMA number. CHAUVET®
will refuse any product
returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly
affixed label.
Once you have received the RMA number, include the following information on a piece of
paper inside the box:
•Your name
•Your address
•Your phone number
•The RMA number
•A brief description of the problem(s)
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be the customer’s responsibility. FedEx packing or double-boxing is
recommended.
CHAUVET® reserves the right to use its own discretion to repair or replace
returned product(s).
CONTACT
US
WORLD HEADQUARTERS - CHAUVET®
General Information
Address:5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Toll free: [phone]
Technical Support
Voice: [phone] (Press 4)
Fax: [phone]
Email: [e-mail]
World Wide Web
www.chauvetlighting.com
UNITED KINGDOM AND IRELAND - CHAUVET® Europe Ltd.
General Information
Address:Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: [phone]
Fax: [phone]
Technical Support
Email: [e-mail]
World Wide Web
www.chauvetlighting.co.uk
MEXICO - CHAUVET® Mexico
General Information
Address:Av. Santa Ana 30
Parque Industrial Lerma
Lerma, Mexico C.P. 52000
Voice: [phone]
Technical Support
Email: [e-mail]
World Wide Web
www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, or Mexico, contact your dealer. Follow their instructions to
request support or to return a product. Visit our website for contact details.