Chauvet COLORado 2-Quad Zoom IP User manual

User Manual

Edition Notes
COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2
Edition
Notes
The COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2 covers the description, safety
precautions, installation, programming, operation, and maintenance of the
COLORado™ 2-Quad Zoom VW Tour. Chauvet
released this edition of the
COLORado™ 2-Quad Zoom VW Tour User Manual in November 2014.
Trademarks
CHAUVET®
is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted
triangle, and all other trademarks in this manual pertaining to services, products, or marketing
statements (example: It’s Green Thinking™) are owned or licensed by CHAUVET®. Any other
product names, logos, brands, company names, and other trademarks featured or referred to
within this document are the property of their respective trademark holders.
Copyright Notice
Chauvet owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2014 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information
purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification,
or printing of this manual or its conte
nt for any other purpose without written consent from
Chauvet.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-
sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or maintaining this product should completely
read through the guide that shipped with the product, as well as this manual, before installing,
operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects.
However, Chauvet assumes no responsibility for any errors or omissions in this document.
Chauvet reserves the right to revise and make changes to the content of this document without
obligation that Chauvet notify any person or company of such revision or changes. This does
not in any way constitute a commitment by Chauvet to make such changes. Chauvet may issue
a revision of this manual or a new edition to incorporate such changes.
Document
Revision
The COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2
supersedes all previous
versions of this manual. Discard any older versions of this manual and replace with this version.
Go to www.chauvetprofessional.com for the latest version.
Author
Date
Editor
Date
D. Couppe
11/3/14
A. Leon
11/3/14

Table of Contents
COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2 -i-
Table of Contents
1. Before You Begin......................................................................................................................................1
What Is Included...........................................................................................................................................................1
Claims..........................................................................................................................................................................................1
Manual Conventions ....................................................................................................................................................................1
Symbols.......................................................................................................................................................................................1
Product At A Glance .....................................................................................................................................................2
Safety Notes .................................................................................................................................................................2
Personal Safety............................................................................................................................................................................2
Mounting And Rigging..................................................................................................................................................................2
Power And Wiring ........................................................................................................................................................................2
Operation.....................................................................................................................................................................................2
Expected LED Lifespan................................................................................................................................................2
2. Introduction...............................................................................................................................................3
Description....................................................................................................................................................................3
Features........................................................................................................................................................................3
Overview.......................................................................................................................................................................4
Dimensions...................................................................................................................................................................5
3. Setup..........................................................................................................................................................6
AC Power......................................................................................................................................................................6
AC Plug........................................................................................................................................................................................6
Power Linking ...............................................................................................................................................................7
DMX Linking..................................................................................................................................................................7
DMX Personalities........................................................................................................................................................................7
Master/Slave Connectivity............................................................................................................................................................7
Mounting.......................................................................................................................................................................8
Orientation ...................................................................................................................................................................................8
Rigging.........................................................................................................................................................................................8
Procedure ....................................................................................................................................................................................8
4. Operation...................................................................................................................................................9
Control Panel Description.............................................................................................................................................9
Control Options.............................................................................................................................................................9
Programming ................................................................................................................................................................9
Menu Map...................................................................................................................................................................10
Configuration (Standalone).........................................................................................................................................11
Master/Slave..............................................................................................................................................................................11
Static Color ................................................................................................................................................................................11
Dimmer Curves..........................................................................................................................................................................11
Curve Settings............................................................................................................................................................................11
Control Panel Lock.....................................................................................................................................................................12
Passcode...................................................................................................................................................................................12
Reset..........................................................................................................................................................................................12
Whites Setting............................................................................................................................................................................12
Calibration Lock Out...................................................................................................................................................................12
Configuration (DMX)...................................................................................................................................................13
DMX Personalities......................................................................................................................................................................13
DMX Control...............................................................................................................................................................................13
Loss Of Signal Setting................................................................................................................................................................13
Zoom Limit Setting.....................................................................................................................................................................13
DMX Values................................................................................................................................................................14
DMX Values (Cont.)....................................................................................................................................................15

Table of Contents
-ii- COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2
5. Technical Information.............................................................................................................................16
Product Maintenance..................................................................................................................................................16
6. Technical Specifications.........................................................................................................................17
Returns .......................................................................................................................................................................18
Contact Us..................................................................................................................................................18

Before You Begin
COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2 -1-
1. BEFORE YOU BEGIN
What Is
Included
•COLORado™ 2-Quad Zoom VW Tour
•Neutrik® powerCON® power cord
•Gel frame holder (9 in/229 mm accessories)
•Gel frame
•Safety cable
•Warranty card
•
Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not Chauvet
. Failure to
report damage to the carrier immediately may invalidate your claim. In addi
tion, keep the box
and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual
Conventions
Convention
Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-
A digital data
transmission protocol.

Before You Begin
-2- COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2
Product At A
Glance
Use on Dimmer
x
Auto Programs
x
Outdoor Use
x
Auto-Ranging Power
Supply
P
Sound-Activated
x
Replaceable Fuse
x
DMX
P
User-Serviceable
x
Master/Slave
P
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained Chauvet
certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting And
Rigging
•This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
•Make sure there are no flammable materials close to this product while it is operating.
•When hanging this product, always secure to a fastening device using a safety cable
(included).
Power And
Wiring
•Always make sure you are connecting this product to the proper voltage in accordance
with the specifications in this manual or on the product’s specification label.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage on the housing, lenses, or cables. Have
the damaged parts replaced by an authorized technician at once.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.
Expected LED
Lifespan LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters,
LEDs exhibit higher operating temperatures than in ideal, single-LED conditions. For this
reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan.
Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If extending this
lifespan is vital, lower the operating temperature by improving the ventilation
around the
product and reducing the ambient temperature to an optimal operating range. In addition,
limiting the overall projection intensity may also help to extend the LEDs’ lifespan.

Introduction
COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2 -3-
2. INTRODUCTION
Description
The COLORado™ 2-Quad Zoom VW Tour is a high-power quad-color (2-CW/2-WW)
LED wash
product with color mixing (CW/WW)
and zoom control. This product consists of a single module
that houses the internal power
supply, the control panel, the LED drivers, the LED boards, and
motorized moving lenses, as well as the power and signal connectors. The
COLORado™ 2-Quad Zoom VW Tour
features a variable zoom, which enables the user to
change the beam angle of the unit via DMX or control panel, and one double bracketed-
yoke that
can serve as a floor mount or hanging support bracket.
Features
•1-, 6-, or 10-channel quad-color LED wash product
•Operating modes:
•1-channel: Dimmer
•6-channel: Dimmer, fine dimmer, strobe, macro, zoom, zoom reset
•10-channel: Dimmer, fine dimmer, warm white, fine warm white, cool white, fine cool
white, macros, strobe, zoom, zoom reset
•10-channel: Dimmer, fine dimmer, warm white, fine warm white, cool white, fine cool
white, macros, strobe, zoom, zoom reset
•CW/WW color mixing via DMX or manually
•Zoom control via DMX or manually
•Color temperature range 2750 to 10300 K
•16-bit dimming of individual colors as well as master dimmer
•Five distinct dimming curves for programming versatility
•Color macros with included speed adjustment
•Double-bracket yoke doubles as a floor stand
•Neutrik® powerCON® power input/output connections
•3-pin and 5-pin DMX input/output connections
•LED display with passcode protection

Introduction
-4- COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2
Overview
Power Out
DMX Out
DMX In
Control Panel
Front View
Rear View
Side View
Adjustment Knob
Double-Yoke Bracket
Safety Cable Loop
Power In
DMX In
DMX Out
Top View

Introduction
COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2 -5-
Dimensions
11.14 in
283 mm
11.14 in
283 mm
9.30 in
236 mm
13.70 in
348 mm

Setup
-6- COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2
3. SETUP
AC Power
Each COLORado™ 2-Quad Zoom VW Tour has an auto-ranging power supply that works with
an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for
each COLORado™ 2-Quad Zoom VW Tour
, refer to the label affixed to the product. You can
also refer to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the Chauvet website
:
www.chauvetlighting.com/download/pro.
Always connect this product to a protected circuit with an appropriate electrical ground
to avoid the risk of electrocution or fire.
Never connect this product
to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The COLORado™ 2-Quad Zoom VW Tour comes with a
power input cord terminated with a
Neutrik® powerCON® connector on one e
nd and an Edison plug on the other end
(U.S. market). If the power input cord that came with your product has no plug, or if you need to
change the Edison plug, use the table below to wire the new plug.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green

Setup
COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2 -7-
Power Linking
The COLORado™ 2-Quad Zoom VW Tour supports power linking. You can power link up
to 13 products at 120 V; up to 16 at 208 V; or up to 17 at 230 V.
This product comes with a power input cord. Power linking cables are available from
Chauvet for purchase.
DMX Linking
You can link the COLORado™ 2-Quad Zoom VW Tour to a DMX controller using a 3- or
5-pin DMX connection. I
f using other DMX compatible products with the
COLORado™ 2-Quad Zoom VW Tour
, you can control each individually with a single
DMX controller.
DMX Personalities
The COLORado™ 2-Quad Zoom VW Tour uses the standard DMX data connection for
the STD.Y, STD.P, STD.W, and UNO DMX personalities.
•Refer to the Introduction chapter for a brief description of each DMX personality.
•Refer to the Operation chapter to learn how to configure the COLORado™ 2-Quad
Zoom VW Tour to work in these personalities.
•The DMX Values section provides you with detailed information regarding the DMX
personalities.
Master/Slave
Connectivity
The Master/Slave mode allows a COLORado™ 2-Quad Zoom VW Tour
(the master) to
control one or more COLORado™ 2-Quad Zoom VW Tours (the slaves
) without a DMX
controller. One COLORado™ 2-Quad Zoom VW Tour becomes the master when running
in Static mode.
You must configure each slave’s control panel to operate in Slave
mode. During
Master/Slave operation, the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master.
The Operation section of this manual provides detailed instru
ctions on how to
configure the master and slaves.
If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a DMX
controller, download the DMX Primer from the Chauvet website:
www.chauvetlighting.com/download/pro.

Setup
-8- COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2
Mounting
Before mounting this product, read and follow the Safety Notes. For our Chauvet
line of
mounting clamps, go to http://trusst.com/productcategory/base-plates-accessories-clamps/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
•When hanging this product, always secure to a fastening device using a safety cable
(such as CH-05 from Chauvet).
Procedure
The COLORado™ 2-Quad Zoom VW Tour comes with a double-yoke bracket
to which you can
either attach mounting clamps for hanging or simply use as a floor stand. You must supply your
own mounting clamps. Make sure the clamps (such as CLP-15 from Chauvet)
are capable of
supporting the weight of this product. Use at least one mounting point per product.
Mounting Diagram
Floor Mounting
Overhead Mounting
Mounting Clamps
Safety Cable

Operation
COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2 -9-
4. OPERATION
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list or decreases the
numeric value when in a function
Control Options
You can set the COLORado™ 2-Quad Zoom VW Tour starting address in the 001–512
DMX range. This enables control of up to 51 products in the 10-channel STD.P or STD.Y
personalities.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
•To go to the desired main level, press <MENU> repeatedly until the option shows on
the display. Press <ENTER> to select. This will take you to the first programming
level for that option.
•To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this
case, if there is another programming level, you will see that first option, or you will
see the selected value.
•Press <MENU> repeatedly to exit to the previous main level.

Operation
-10- COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2
Menu Map
Main Level Programming Levels Description
STAT
W.
000–255 Combines warm white (W.) and cool white (C.) to make a
custom color (0–100%)
C.
Z.
Changes the beam angle (zoom)
RUN
DMX
DMX mode
SLAV
Master/Slave mode
DMX
D.001–D.512
Selects the DMX starting address
PERS
STD.P
10-channel: dimmer, fine dimmer, warm white, fine warm
white, cool white, fine cool white, macros, strobe, zoom,
zoom reset
STD.Y
10-channel: dimmer, fine dimmer, warm white, fine warm
white, cool white, fine cool white, macros, strobe, zoom,
zoom reset
STD.W
6-channel: dimmer, fine dimmer, macros, strobe, zoom,
zoom reset
UNO
1-channel: dimmer
SET
CALE YES
Allows editing of the CAL1 > WH.01–WH.05 programming
level
NO
Locks out editing of the CAL1 > WH.01–WH.05 programming
level
DIM
OFF
Selects dimming profiles from fast (DIM.1) to slow (DIM.4) or
OFF
DIM.1
DIM.2
DIM.3
DIM.4
DERR
BLAC
Blacks out fixture upon loss of DMX
SAVE
Continues with last command upon loss of DMX control
ZOOM
BASE
Sets default zoom position (full movement)
POS.1
Sets position 1 setting for zoom limit
POS.2
Sets position 2 setting for zoom limit
CURV
OFF
Selects dimming curves from fast (CV1) to slow (CV3) or
OFF
CV1
CV2
CV3
REST PASS
****
(Enter
Passcode)
Defaults product to factory settings
CAL1
WH.01–
WH.05
W.
000–255 Selects the white color temperature
C.
KEY
ON
Turns the passcode on or off
OFF
ZOOM
POS.1
P.000–255
Position 1 for the zoom
POS.2
Position 2 for the zoom

Operation
COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2 -11-
Configuration
(Standalone)
Use standalone configuration to operate the product without a DMX controller.
Master/Slave
The Master/Slave mode allows a group of COLORado™ 2-Quad Zoom VW Tour
s
(the slaves) to simultaneously duplicate the output of another COLORado™ 2-
Quad
Zoom VW Tour (the master) without a DMX controller.
1. Set each of the slaves:
a. Go to the RUN main level.
b. Select SLAVE.
2. Set the master:
a. Set the running mode to DMX as explained in DMX Control.
b. Select a static mix of colors.
•The master is the one that runs a program in Static Color mode.
•Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
•The master should be the first product in the daisy chain.
Static Color
The Static Color mode allows for permanent color mixing without a DMX controller.
1. Go to the STAT main level.
2. Select the desired color (W. or C.).
3. Select the desired color value (000–255).
4. Repeat for the other colors.
5. Select Z..
6. Select the beam angle value (000–255).
Dimmer Curves
This setting determines how fast the output of the COLORado™ 2-Quad Zoom VW Tour
changes when you modify the values of the cool white, warm white
, and dimmer faders.
This setting provides four
different options to simulate the dimming curve of an
incandescent lighting product.
1. Go to the SET main level.
2. Select DIM.
3. Select a dimmer curve (OFF, DIM.1, DIM.2, DIM.3, or DIM.4).
OFF:
The output is proportional (linear) to the dimmer and CW/WW
channel values.
DIM1–4:
The output follows the dimmer and CW/WW channel values based on
the corresponding dimmer curve, DIM.1 being the fastest and DIM.4
the slowest.
Curve Settings
This setting allows you to select the dimmer curve shape using the
red, green, blue,
white, and dimmer faders.
1. Go to the SET main level.
2. Select CURV.
3. Select a dimmer curve (OFF, CV1, CV2, or CV3).
OFF:
The output is proportional (linear) to the dimmer and CW/WW channel
values.
CV1–3:
The output follows the dimmer and CW/WW channel values based on the
corresponding dimmer curve, CV1 being the fastest and CV3 the
slowest.
For optimum control of the 16-bit dimming channels in the STD.Y, STD.W,
and
STD.P personalities, be sure that both dimming curves in SET > DIM and
SET >
CURV are set to OFF.

Operation
-12- COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2
Control Panel
Lock
This setting enables you to activate or disable the control panel lock, which keeps non-
authorized personnel from changing the product’s settings.
1. Go to the KEY main level.
2. Select ON or OFF.
When the
control panel lock is active, the product will prompt you to enter the passcode
after 30 seconds of control panel inactivity or after turning on the product.
Passcode
After being prompted to enter the passcode:
•Press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
Reset
This setting allows you to reset the COLORado™ 2-Quad Zoom VW Tour to the default values,
including the custom programs.
1. Go to the SET main level.
2. Select REST, press <ENTER>.
3. When PASS shows, press <ENTER>.
4. Enter the master access passcode as described in Passcode.
5. Wait for the reset process to finish.
Whites Setting
This setting allows you to select and edit the temperature of the white colors used in channel 3
(Macros) when in the STD.W mode or channel 7 (Macros) when in the STD.P or STD.Y modes.
1. Go to the CAL1main level.
2. Select a white color (WH.01–05).
3. Select a color (C. or W.).
4. Select a color value (000–255).
5. Repeat for the other color.
Calibration Lock
Out
This setting enables you to activate or disable the White setting lock out feature, which keeps
non-authorized personnel from changing the product’s settings.
1. Go to the SET main level.
2. Select CALE.
3. Select YES or NO.

Operation
COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2 -13-
Configuration
(DMX)
Use DMX configurations to operate the product with a DMX controller.
DMX
Personalities
This setting allows you to choose a particular DMX personality.
1. Go to the PERS main level.
2. Select the desired personality (STD.P, STD.Y, STD.W, or UNO).
•See the DMX Values section for the highest starting address you can select for each
personality.
•Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
DMX Control
In this mode, each product will respond to a unique starting address from the DMX controller. All
products with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personalities.
2. Set the running mode:
a. Go to the RUN main level.
b. Select the DMX programming level.
3. Set the starting address:
a. Go to DMX main level.
b. Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
DMX Personality
DMX Address
DMX Personality
DMX Address
STD.P
503
STD. Y
503
UNO
512
STD. W
507
Loss Of Signal
Setting
This setting controls how the product will respond when the DMX signal is lost.
1. Go to the SET main level.
2. Select DERR.
a. Select SAVE to make the product use the last command used when the signal is lost.
b. Select BLACto turn off the all the LEDs when the signal is lost.
Zoom Limit
Setting
This setting allows you to limit the zoom range using three (3) different modes.
Basic mode is the default setting and allows the zoom to be moved full range (000–255
) and
has no adjustable limit.
Position 1 and Position 2 modes allow you to set limits on how far the zoom moves.
1. Set the mode to be used:
a. Go to the SET main level.
b. Select ZOOM.
c. Select a mode (BASE, POS.1, or POS.2).
2. Set the limit for each mode:
a. Go to the ZOOM main level.
b. Select a mode (POS.1 or POS.2).
c. Select a zoom limit value (P.000–255).

Operation
-14- COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2
DMX Values
STD.Y
Channel Function Value Percent/Setting
1
Dimmer
000 ó255
0–100%
2
Fine Dimmer
000 ó255
Fine control
3
Warm White
000 ó255
0–100%
4
Fine Warm White
000 ó255
Fine control
5
Cool White
000 ó255
0–100%
6
Fine Cool White
000 ó255
Fine control
7 White Macros
000 ó010
011 ó050
051 ó080
081 ó110
111 ó140
141
ó
255
No function
White 1
White 2
White 3
White 4
White 5
8 Strobe
000 ó009
010 ó255
No function
0–20 Hz
9
Zoom
000 ó255
0–100%
10 Zoom Reset
000
ó
200
201 ó220
221 ó255
No function
Zoom reset
No function
STD.P
Channel
Function
Value
Percent/Setting
1
Dimmer
000 ó255
0–100%
2
Fine Dimmer
000 ó255
Fine control
3
Warm White
000 ó255
0–100%
4
Fine Warm White
000 ó255
Fine control
5
Cool White
000 ó255
0–100%
6
Fine Cool White
000 ó255
Fine control
7 White Macros
000 ó010
011 ó050
051 ó080
081 ó110
111 ó140
141 ó255
No function
White 1
White 2
White 3
White 4
White 5
8 Strobe
000 ó009
010 ó255
No function
0–20 Hz
9
Zoom
000 ó255
0–100%
10 Zoom Reset
000 ó200
201 ó220
221 ó255
No function
Zoom reset
No function

Operation
COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2 -15-
DMX Values (Cont.)
STD.W
Channel Function Value Percent/Setting
1
Dimmer
000 ó255
0–100%
2
Fine Dimmer
000 ó255
Fine control
3 White Macros
000 ó010
011 ó050
051 ó080
081 ó110
111 ó140
141 ó255
No function
White 1
White 2
White 3
White 4
White 5
4 Strobe
000
ó
009
010 ó255
No function
0–20 Hz
5
Zoom
000 ó255
0–100%
6 Zoom Reset
000 ó200
201 ó220
221 ó255
No function
Zoom reset
No function
UNO
Channel Function Value Percent/Setting
1
Dimmer
000 ó255
0–100%

Technical Information
-16- COLORado™ 2-Quad Zoom VW Tour User Manual Rev. 2
5. TECHNICAL INFORMATION
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean this product
frequently. Usage and environment are contributing factors in determining the cleaning
frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces
light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
To clean your product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external vents.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or
isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Wipe any dirt or grime to the outside edges of the lens surface.
7. Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.