Chauvet Legend 330SR Spot User manual

User Manual

Edition Notes
Legend™ 330SR Spot User Manual Rev. 1
Edition
Notes
The Legend™ 330SR Spot User Manual Rev. 1 covers the description, safety precautions,
installation, programming, operation, and maintenance of the Legend™ 330SR Spot
.
CHAUVET® released this edition of the Legend™ 330SR Spot User Manual in May 2014.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted
triangle, and all other trademarks in this manual pertaining to services, products, or marketing
statements (example: It’s Green Thinking™) are owned or licensed by CHAUVET®. Any other
product names, logos, brands, company names, and other trademarks featured or referred to
within this document are the property of their respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2014 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Use
CHAUVET® authorizes its customers to download and print this manual for professional
information purposes only. CHAUVET® expressly prohibits the u
sage, copy, storage,
distribution, modification, or printing of this manual or its content for any other purpose without
written consent from CHAUVET®.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or maintaining this product should completely
read through the guide that shipped with the product, as well as this manual, before installing,
operating, or maintaining this product.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all respects.
However, CHAUVET® assumes no responsibility for any errors or omissions in this document.
CHAUVET® reserves the right to revise and make changes to the content of this document
without obligation that CHAUVET® notify any person or company of such revision or changes.
This does not in any way constitute a commitment by CHAUVET® to make such changes.
CHAUVET® may issue a revision of this manual or a new edition to incorporate such changes.
Document
Revision
The Legend™ 330SR Spot User Manual Rev. 1 is the first edition of this manual. Go to
www.chauvetprofessional.com for the latest version.
Author
Date
Editor
Date
D. Couppe
5/27/14
A. Leon
5/27/14

Table of Contents
Legend™ 330SR Spot User Manual Rev. 1 -i-
Table of Contents
1. Before You Begin......................................................................................................................................1
What Is Included...........................................................................................................................................................1
Claims..........................................................................................................................................................................................1
Manual Conventions ....................................................................................................................................................................1
Symbols.......................................................................................................................................................................................1
Product At A Glance .....................................................................................................................................................2
Safety Notes .................................................................................................................................................................2
Personal Safety............................................................................................................................................................................2
Mounting And Rigging..................................................................................................................................................................2
Power And Wiring ........................................................................................................................................................................2
Operation.....................................................................................................................................................................................2
2. Introduction...............................................................................................................................................3
Description....................................................................................................................................................................3
Features........................................................................................................................................................................3
Overview.......................................................................................................................................................................4
Dimensions...................................................................................................................................................................5
3. Setup..........................................................................................................................................................6
AC Power......................................................................................................................................................................6
AC Plug........................................................................................................................................................................................6
Fuse Replacement.......................................................................................................................................................................6
DMX Linking..................................................................................................................................................................6
DMX Personalities........................................................................................................................................................................6
Gobo Wheel..................................................................................................................................................................7
Color Wheel..................................................................................................................................................................8
Lamp Replacement.......................................................................................................................................................9
Procedure ....................................................................................................................................................................................9
Procedure (Cont.).......................................................................................................................................................................10
Increasing the Lamp’s Life.........................................................................................................................................................10
Mounting.....................................................................................................................................................................11
Orientation .................................................................................................................................................................................11
Rigging.......................................................................................................................................................................................11
Procedure ..................................................................................................................................................................................11
4. Operation.................................................................................................................................................12
Control Panel Description...........................................................................................................................................12
LCD Display................................................................................................................................................................12
Control Options..........................................................................................................................................................................12
Programming..............................................................................................................................................................................12
Menu Map...................................................................................................................................................................13
Menu Map (Cont.).......................................................................................................................................................14
DMX Functions...........................................................................................................................................................................15
Product Settings.........................................................................................................................................................................15
Lamp Settings............................................................................................................................................................................16
Display Settings .........................................................................................................................................................................17
Fixture Tests ..............................................................................................................................................................................17
Fixture Information.....................................................................................................................................................................17
Reset Functions.........................................................................................................................................................................18
Special Functions.......................................................................................................................................................................19
Offset Mode ................................................................................................................................................................19
Entering Offset Mode.................................................................................................................................................................19
DMX Values................................................................................................................................................................21
DMX Values (Cont.)....................................................................................................................................................22
DMX Values (cont.).....................................................................................................................................................23

Table of Contents
-ii- Legend™ 330SR Spot User Manual Rev. 1
DMX Values (cont.).....................................................................................................................................................24
DMX Values (cont.).....................................................................................................................................................25
DMX Values (cont.).....................................................................................................................................................26
DMX Values (cont.).....................................................................................................................................................27
5. Technical Information.............................................................................................................................28
Product Maintenance..................................................................................................................................................28
Error Messages ..........................................................................................................................................................29
6. Technical Specifications.........................................................................................................................30
Returns .......................................................................................................................................................................31
Contact Us..................................................................................................................................................31

Before You Begin
Legend™ 330SR Spot User Manual Rev. 1 -1-
1. BEFORE YOU BEGIN
What Is
Included
•Legend™ 330SR Spot
•Neutrik® powerCON® power cord
•2 Omega brackets with mounting hardware
•Warranty Card
•Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not CHAUVET®. Failure
to report damage to the carrier immediately may invalidate your claim. In addition, keep the box
and contents for inspection.
For other issues, such as missing com
ponents or parts, damage not related to shipping, or
concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols
Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Before You Begin
-2- Legend™ 330SR Spot User Manual Rev. 1
Product At A
Glance
Use on Dimmer
x
Auto Programs
x
Outdoor Use
x
Auto-Ranging Power
Supply
P
Sound-Activated
x
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Master/Slave
x
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained CHAUVET® certified technicians. Do
not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting And
Rigging
•This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•This product weighs 47 lb (21.3 kg). Always ask for help when mounting this product to
avoid personal injuries or damage to the product.
•Make sure there are no flammable materials close to this product while it is operating.
•Always carry this product by the handles. Do not carry from the head.
•When hanging this product, always secure to a fastening device using a safety cable.
Power And
Wiring
•Always make sure you are connecting this product to the proper voltage in accordance
with the specifications in this manual or on the product’s specification label.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage to the housing, lenses, ultraviolet filter, or
cables. Have the damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•Do not aim this product toward the Sun. The lenses could concentrate the solar energy
and cause internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.

Introduction
Legend™ 330SR Spot User Manual Rev. 1 -3-
2. INTRODUCTION
Description
The Legend™ 330SR Spot is a compact, electronic, moving yoke beam product equipped with a
330 watt X8 lamp. It includes a color wheel with 7 colors plus white
. It also includes a rotating
3-facet prism, frost, remote focus, and 2 gobo wheels for gobo morphing.
Features
•Compact moving yoke spot fixture with zoom optics and motorized focus
•Virtually silent operation for use in any situation
•Precision optics for crisp, even gobo projections
•Variable frost for wash-style effects
•3-facet rotating prism with zoom for stunning effects
•Fast, precise pan and tilt movement
•Color wheel:
•7 colors + Open (white)
•CTO - Split/linear colors
•Rainbow color spin at variable speed
•Gobo wheel 1:
•8 gobos (4 metal + 4 glass) + Open
•Rotating, interchangeable, indexing, slot-n-lock
•Gobo wheel spin at variable speed
•Gobo wheel 2:
•14 gobos + Open
•Gobo wheel spin at variable speed
•3-facet rotating prism
•CMY color mixing system with vector speed adjustments
•DMX channels: 21 or 27
•Pan: 540°
•Tilt: 270°
•Reset over DMX
•Electronic power supply
•Mechanical dimmer
•Neutrik® powerCON® power input
•3- and 5-pin DMX input and output connectors

Introduction
-4- Legend™ 330SR Spot User Manual Rev. 1
Overview
Data In
Power In
Front View
Rear View
Power
Switch
Fuse
Data
Out
Control Panel
Handle
Top View
Side View
DMX In
DMX
Out

Introduction
Legend™ 330SR Spot User Manual Rev. 1 -5-
Dimensions
15.12 in
384 mm
4.76 in
121 mm
22.01 in
428 mm
10.63 in
270 mm
22.01 in
559 mm
17.13 in
435 mm
13.54 in
344 mm
15.12 in
384 mm
19.80 in
503 mm
25.55 in
649 mm

Setup
-6- Legend™ 330SR Spot User Manual Rev. 1
3. SETUP
AC Power
Each Legend™ 330SR Spot has an auto-ranging power supply that works with an input voltage
range of 100 to
240 VAC, 50/60 Hz. To determine the power requirements for each
Legend™ 330SR Spot
, refer to the label affixed to the product. You can also refer to the
Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the CHAUVET® website
:
www.chauvetlighting.com/download/pro.
Always connect this product to a protected circuit with an appropriate electrical ground
to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Legend™ 330SR Spot comes with a power input cord terminated with a Neutrik®
powerCON® A connector on one end and has been left bare-wired on the other end. U
se the
table below to wire a new plug.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a Phillips-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with a another fuse of the same type and rating
(T 10 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always
replace the blown fuse with another of the same type and rating.
DMX Linking
You can link the Legend™ 330SR Spot to a DMX controller using a 3- or 5-pin DMX connection.
If using other DMX-compatible products with the Legend™ 330SR Spot
, you can control each
individually with a single DMX controller.
DMX
Personalities
The Legend™ 330SR Spot uses a 3- or 5-pin DMX data connection for the 21- and 27-channel
DMX personalities.
•Refer to the Introduction chapter for a brief description of each DMX personality.
•Refer to the Operation chapter to learn how to configure the Legend™ 330SR Spot to work
in these personalities.
•The DMX Values section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the CHAUVET® website:
www.chauvetlighting.com/download/pro.

Setup
Legend™ 330SR Spot User Manual Rev. 1 -7-
Gobo Wheel
The Legend™ 330SR Spot includes two gobo wheels: 8 rotating gobos plus open on wheel 1
and 14 fixed gobos plus open on wheel 2. The diagram shows the gobo number on the wheel,
as numbered in the DMX Values tables.
Gobo Wheel 1
Gobo Wheel 2
1
2
3
4
8
7
6
5
1
2
3
4
5
8
6
7
13
14
12
9
11
10

Setup
-8- Legend™ 330SR Spot User Manual Rev. 1
Color Wheel
The Legend™ 330SR Spot includes one color wheel with 7 fixed colors plus open (white), as
indicated below. The diagram shows the color number on the wheel, as numbered in the DMX
Values tables.
Open
(White)
1
2
3
6
5
4
7

Setup
Legend™ 330SR Spot User Manual Rev. 1 -9-
Lamp Replacement
The Legend™ 330SR Spot is equipped with an Osram Sirius 330W X8 lamp. Follow the
procedure below to safely change the lamp.
Disconnect the product from power before opening.
Procedure
1. Turn the product off and disconnect it from power. Wait at least 15 minutes for the
lamp to cool down.
2. Remove back cover using the 2 Phillips-head ¼-turn screws.
3. Orient the rear of the product so that the spring clip inside is facing downward.
Spring Clip

Setup
-10- Legend™ 330SR Spot User Manual Rev. 1
Procedure
(Cont.)
4. Using the lamp base, push the lamp down against the spring clips and then roll the
lamp out the top.
5. Remove the 2 wires connected to the lamp by the spade terminals.
6. Reverse the steps above to install the new lamp. Do not touch the glass with bare
hands.
Do not turn product on without a lamp!
Increasing the Lamp’s
Life
•ALWAYS turn the lamp off by using the DMX controller or the product’s control
panel, then wait at least 5 minutes before switching off the product. This will
keep the fans running to extract any remaining heat from the product’s head.
•DO NOT power cycle the product unless it is necessary.
•DO NOT re-strike the lamp immediately after turning it off. CHAUVET®
recommends waiting 5 minutes before trying to re-strike the lamp.
•DO NOT touch the lamp without wearing gloves to avoid leaving grease on the
bulb or on the contacts that could reduce the lamp’s life.
•ALWAYS change the lamp when it has reached its recommended lifespan to
avoid the risk of lamp explosion.
Spade Connectors

Setup
Legend™ 330SR Spot User Manual Rev. 1 -11-
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET® line of
mounting clamps, go to http://trusst.com/productcategory/base-plates-accessories-clamps/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
CHAUVET® recommends using the following general guidelines when mounting this product.
•When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
•When hanging this product, always secure to a fastening device using a safety cable (such
as CH-05 from CHAUVET®).
Procedure
The Legend™ 330SR Spot comes with a preinstalled mounting surface to which you will be
able to attach the 2 included omega brackets. Make sure the clamps (such as CLP-15 from
CHAUVET®) are capable of supporting the weight of this product. Use two mounting points per
product. In addition, use a safety cable to link the product to the structure.
Mounting Diagram
Floor Mounting
Overhead Mounting
Omega Brackets
Safety Cable
Mounting Clamp
Mounting
Surface

Operation
-12- Legend™ 330SR Spot User Manual Rev. 1
4. OPERATION
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list or decreases the
numeric value when in a function
LCD Display
The Legend™ 330SR Spot features a backlit liquid crystal display (LCD) that provides
information regarding the product’s settings and status. In addition, the LCD
can be
inverted. This allows ease of reading the display whether the product is positioned on the
floor or hanging from a truss.
Upon power up, the LCD will show the Legend logo and the product identification. After
completing the power up tests, the LCD will show the DMX address, the DMX mode, and
the temperature, along with a warning sign if the tests have detected an error.
Press <ENTER> to read the corresponding error message (see Error Messages in
the Technical Information section).
To clear the error messages, press <ENTER> while they show on the display.
Control Options
You can set the Legend™ 330SR Spot starting address in the 001–512 DMX range. This
enables control of up to 18 products in the 27-channel Mode2 personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
•To enter programming mode, press any key on the control panel to wake the opening
screen. Press <MENU> until you see one of the main level options.
•To highlight a menu option or to change a setting, press <UP> or <DOWN>.
•To change menu levels as shown in the Menu Map, press <ENTER> or <MENU>.
This is equivalent to moving right and left of the Menu Map, respectively.
•To accept the current or new value, press <ENTER>.
•To return to the previous menu without making changes, press <MENU>.
•To exit programming mode, press <MENU> until you see one of the main level
options, the opening screen, or do not press any button for 30 seconds and the
screen will automatically revert to the opening screen.

Operation
Legend™ 330SR Spot User Manual Rev. 1 -13-
Menu Map
Main Level Programming Levels Description
DMX Functions
DMX Address
001–512
Selects a starting DMX address
DMX Channel Mode
Mode1 (21)
Selects the 21-channel DMX mode
Mode2 (27)
Selects the 27-channel DMX mode
View DMX Value
Shows current DMX values for each channel
Fixture Setting
Pan Inverse
No
Defines the direction of the pan function
Yes
Tilt Inverse
No
Defines the direction of the tilt function
Yes
P/T Feedback
No
Defines auto correct function
Yes
Bl.o. P/T Moving
No
Defines the pan/tilt move-in black delay
Yes
Bl.o. Color Change
No
Defines the color change move-in black delay
Yes
Bl.o. Gobo Change
No
Defines the gobo change move-in black delay
Yes
Lamp Setting
On/Off
OFF
Turns lamp on/off
ON
State/Power On
OFF
Defines the status of the lamp when powering
up the product
ON
Off Via DMX
No
Turns off the unit via DMX controller
Yes
On if DMX On
No
Turns lamp on when DMX signal is detected
Yes
Off if DMX Off
No
Turns lamp off when DMX signal is lost
Yes
Ignition Delay 0S–255S
Selects duration of delay between product
power on and lamp power on
Low Power Delay 0S–255S
Selects the duration of delay when shutter is
closed and lamp enters lower power state
Display Setting
Display Inverse
No
Defines the direction of the display
Yes
Backlight Auto Off
No
Display backlight always on
Yes
Display backlight turns off after 1 minute of
control panel inactivity
Backlight Intensity 1–10
Selects backlight intensity from dim (1) to
bright (10)
Temperature Unit
°C
Defines how temperature is displayed
°F

Operation
-14- Legend™ 330SR Spot User Manual Rev. 1
Menu Map (Cont.)
Main Level Programming Levels Description
Fixture Test
Auto Test
Selects the product’s automatic test sequence
Manual Test
Selects the product’s manual test function
Fixture Information
Fixture Use Time
Displays total hours of products use
Lamp On Time Exit
Displays the amount of time the lamp has
been on
Reset Time
Resets lamp timer to 0
Firmware Version
Displays the firmware version
Reset Functions
Pan/Tilt
No
Resets pan/tilt function to home position
Yes
Shutter
No
Resets shutter function to home position
Yes
Color/CMY
No
Resets color wheel/color flags to home
position
Yes
Gobo/Iris
No
Resets gobo wheel/iris functions to home
position
Yes
Zoom/Frost/Focus/
Prism
No
Resets zoom/frost/focus/prism functions to
home position
Yes
All
No
Resets all functions to home position
Yes
Special Functions
Fixture
Maintenance
Interval 10–300 h
Defines amount of hours between
maintenance
Remain
Time Exit
Shows amount of time remaining in
maintenance cycle
Reset Time
Resets maintenance timer
Factory Setting
No
Sets product back to default factory settings
Yes

Operation
Legend™ 330SR Spot User Manual Rev. 1 -15-
DMX Functions
From the Main Menu, highlight DMX Functions and press <ENTER> (a new menu with
the DMX functions will open).
DMX Address
1. Highlight DMX Address.
2. To change the current address, press <ENTER>.
a. Change the starting address (001–512).
b. Accept the new value.
DMX Mode
1. Highlight DMX Channel Mode.
2. To change the current mode, press <ENTER>.
a. Select a DMX mode (Mode1/Mode2).
b. Accept the selected option.
View DMX Values
1. Highlight View DMX Value.
2. Press <ENTER>.
a. Scroll along the list to see the values of all the current attributes.
b. Return to the previous menu.
The list will show either 21 or 27 attributes, depending on the current DMX mode.
Product Settings
From the Main Menu, highlight Fixture Settings and press <ENTER>.
Reverse Pan Direction
1. Highlight Pan Inverse.
2. To reverse the pan direction, press <ENTER>.
a. Select YES to reverse the pan direction or NO to use the normal pan direction.
b. Accept the selected option.
Reverse Tilt Direction
1. Highlight Tilt Inverse.
2. To reverse the tilt direction, press <ENTER>.
a. Select YES to reverse the tilt direction or NO to use the normal tilt direction.
b. Accept the selected option.
P/T Feedback
1. Highlight P/T Feedback.
2. To select whether the product will auto correct itself when pan/ tilt is knocked out of
position, press <ENTER>.
a. Select YES to turn on the auto correct or NO to turn off the auto correct.
b. Accept the selected option.
Head Motion Blackout
1. Highlight Bl.o P/T Moving.
2. To black out the output when the head moves, press <ENTER>.
a. Select YES to black out the output when the head tilts or pans, or NO to keep
the output on while the head moves.
b. Accept the selected option.
Color Change Blackout
1. Highlight Bl.o Color Change.
2. To black out the output when the color wheel changes, press <ENTER>.
a. Select YES to black out the output during a color change or NO to keep the
output on to see the color changing.
b. Accept the selected option.
Gobo Change Blackout
1. Highlight Bl.o Gobo Change.
2. To black out the output when the gobo wheel changes, press <ENTER>.
a. Select YES to black out the output during a gobo change or NO to keep the
output on to see the gobo changing.
b. Accept the selected option.

Operation
-16- Legend™ 330SR Spot User Manual Rev. 1
Lamp Settings
From the Main Menu, highlight Lamp Settings and press <ENTER>.
The lamp will not turn on if the ambient temperature is 104 ºF (40 ºC) or higher.
Lamp On/Off
1. Highlight On/Off.
2. To turn the lamp on or off, press <ENTER>.
a. Select ON to turn the lamp on or OFF to turn the lamp off.
b. Accept the selected option.
Lamp Status During Power
On
1. Highlight State/Power On.
2. To change the lamp status during power on, press <ENTER>.
a. Select ON to turn on the product and the lamp simultaneously or OFF
to turn on
the product without turning on the lamp.
b. Accept the selected option.
Remote Turn Off
1. Highlight Off Via DMX.
2. To enable/disable remote turn off, press <ENTER>.
a. Select YES to enable product turn off from either a DMX controller or its power
switch, or NO to turn the product off only from its power switch.
b. Accept the selected option.
Lamp On if DMX Present
1. Highlight On if DMX On.
2. To turn the lamp on when DMX is present, press <ENTER>.
a. Select YES to turn the lamp on if DMX signal is present, or NO to turn the lamp
on only from the control panel.
b. Accept the selected option.
Lamp Off if DMX Absent
1. Highlight Off if DMX Off.
2. To turn the lamp off when DMX is absent, press <ENTER>.
a. Select YES to turn the lamp off if DMX signal is absent, or NO to turn the lamp
off only from the control panel.
b. Accept the selected option.
Lamp Strike Delay
1. Highlight Ignition Delay.
2. To set the lamp strike delay, press <ENTER>.
a. Select the delay before the lamp strikes after power up in seconds (0S–255S).
b. Accept the new value.
Fixture Shut Off Delay
1. Highlight Low Power Delay.
2. To set the lamp shut off delay, press <ENTER>.
a. Select the delay before the product powers off after lamp off in seconds
(0S–255S).
b. Accept the new value.