Cisco 7942 Setup guide

Cisco IP Phone 7942
User Training Guide
Key to the Cisco 7942:
1
2
3
= Line Buttons
= Foot Adjust Button
= Message Button
4= Directories Button
5= Help Button
6= Settings Button
7= Speaker Button
8= Mute Button
9= Headset Button
10 = Volume Button
11 = Navigation Button
12 = Keypad Buttons
13 = Soft Key Buttons
14 = Handset with
Voicemail Indicator
Light
1 2
3
4
5
6
7
8
910
1112
13
14

Using your Cisco IP Phone:
Following are instructions on how to use the basic features of your IP phone.
You can dial internal extensions from phone by dialing the 5 digit extension number you wish
to reach. You must Dial “9” for an outside line.
For Assistance or to report problems:
Contact the Department of Technology Services (DoTS) Hotline at 720-423-3888.
5 Different Ways to
place a call:
•Lift the handset and dial the
number.
•Press the LINE button (1) and
dial the number.
•Press the SPEAKER button (7)
and dial a number.
•Press the NEW CALL soft key
(13) and dial a number.
•Press the DIAL soft key (13)
from the Corporate Directory to dial a
number. (See the section below
called “Using the Corporate
Directory.”)
Placing a call on hold:
•During a call press the HOLD
soft key (13).
•To return to the call, Press the
RESUME soft key (13).
1 2
3
4
5
6
7
8
910
1112
13
14
2

Answering a call:
•Lift the Handset (14).
•Press the ANSWER soft key (13).
•Press the SPEAKER button (7).
Ending a call:
•Hang up the handset (14).
•Press the EndCall soft key (13).
•Press the SPEAKER button (7).
Forwarding all calls:
You can set up call forwarding to
send all your incoming calls to a
different number.
1. Press the CFwdAll soft key
(13). You should hear 2 beeps.
2. Enter the 5 digit extension that
you wish to forward your phone
to. You will hear one beep to
confirm your entry.
3. To cancel the call forwarding,
press the CFwdAll soft key (13)
again. You will hear one beep to
confirm your entry.
Transferring a call:
1. To transfer an active call to another
phone number, press the TRANSFER
soft key (13).This automatically puts
the call on hold, and provides you
with a dial tone.
2. Dial the number you wish to transfer
the call to.
3. You can transfer when the phone
begins to ring, or you can wait for the
recipient to answer in order to
announce the call to them before
transferring. Press the TRANSFER
soft key (13) again to complete the
transfer.
4. Hang up the receiver when the
transfer is complete.
NOTE: If the party refuses the call, press
the Resume soft key (13) to return to
the original call.
1 2
3
4
5
6
7
8
910
1112
13
14
Placing a conference call:
1. During a call, press the More soft key
(13) and then the Confrn soft key
(13). This opens a new line while
placing the current party on hold.
2. Place the call to the other party.
3. When the call connects, press the
Confrn soft key (13) again to add
this party to the call.
4. Repeat the first three steps to add
additional participants.
NOTE:
•The conference call initiator can drop
the last party added by pressing the
RmLstC soft key (13). You will need
to press the more soft key (13) until
the RmLstC key appears.
•To end a conference call, all but one
party must hang up.
•Once the conference call initiator
disconnects, no additional parties can
be added.
3

Redialing a number:
•Lift the Handset (14) and press
the Redial soft key (13).
•You can also press the Redial soft
key (13) without lifting the handset to
place the call from the speakerphone.
Using the Corporate
Directory:
1. Press the Directory button (4).
2. Press the Navigation button
(11) until you get to the
Corporate Directory, or press 5
on your Key Pad (12).
3. Press the Select soft key (13)
to select the Corporate
Directory.
4. Use the Navigation button (11)
to highlight the search method of
your choice (e.g.: First Name,
Last Name, or Number).
5. Using the Keypad (12), enter
the search information. (Partial
entries are acceptable.)
To enter a letter press the
corresponding number on the
key pad. For example for “b”
press the “2” button twice in
rapid succession. The cursor
automatically advances to the
next letter. If you make an error,
press the << soft key (13) to
backspace.
5. Press the Search soft key (13).
The LCD displays the results of
the search.
6. Use the Navigation button (11)
to highlight the number you wish
to call.
7. Press the Dial soft key (13) to
place the call or just pick up your
receiver and the call will
connect.
Adjusting the LCD
Contrast:
1. Press the Settings button (6).
2. Use the Navigation button (11)
to highlight User Preferences by
moving the cursor and choosing
the Select soft key, or press “1”
on the Key Pad (12).
3. Select Contrast by moving the
cursor and choosing the Select
soft key, or press “4” on the key
pad (12).
4. Press the Up or Down soft key
(13) to adjust the contrast.
5. Press the Save soft key (13)
when the desired Contrast is
achieved.
6. When finished press the Settings
button (6) to return to the main
screen.
1 2
3
4
5
6
7
8
910
1112
13
14
Using Call History:
1. Press the Directory button (4).
2. Press the Navigation button (11)
and highlight Missed Calls,
Received Calls, or Placed Calls.
3. Press the Select soft key (13) to
open the directory menu option of
your choice.
4. To place a call from the directory,
highlight the desired number using
the Navigation button (11), and
press the Dial soft key (13).
NOTE:
•If you choose to exit the directory
without placing a call, press the
Exit soft key (13) twice.
•To clear your call history, select
the Clear soft key (13).
4

Adjusting the ringer
volume:
1. While the phone is idle, press
the Volume button (10) once
to hear a sample of the volume
level.
2. Continue to press the Volume
button (10) to adjust the
volume level.
NOTE: The ringer volume level is
automatically saved.
Adjusting the
handset,
speakerphone, and
headset volume:
1. During an active call, press the
Volume button (10) to
increase or decrease the
volume of your handset,
speakerphone, or headset.
2. To save the volume setting,
press the Save soft key (13).
NOTE: Adjusting and saving the
volume level during a call only
affects the currently active
voice receiver. For example, if
you press the Volume button
(10) when you are using the
Handset (14), you will only
change the handset volume,
not the speaker or headset
volume.
Muting a call:
1. Press the Mute button (8).
2. To disengage mute, press the
Mute button (8) again.
NOTE: If you are using mute along
with your speakerphone, lifting
the Handset (14) will
disengage mute.
Changing the ring:
1. Press the Settings Button (6).
2. Press “1” for User Preferences
or press the Select soft key
(13) when User Preferences is
highlighted.
3. Press “1” for Rings or press the
Select soft key (13) when
Rings is highlighted.
4. With Default Ring highlighted,
press the Select soft key (13).
5. Use the Navigation button (11)
to highlight any ring listed.
6. Press the Play soft key (13) to
sample a ring tone.
7. Press the Select soft key (13)
once the desired ring tone has
been chosen.
1 2
3
4
5
6
7
8
910
1112
13
14
5

Transfer a call directly
to voicemail:
1. Select the Transfer soft key
(13) and, using the Keypad
(12), dial * and the desired
extension.
2. Press the Transfer soft key
(13) again to complete the
transfer.
NOTE: To dial straight into an
extension’s voicemail, dial *
and the extension.
To access
voicemail from
your phone:
1. Press the Message
button (3) on your
phone.
2. Enter your PIN
followed by the # key.
Your initial PIN is sent
to your email box.
3. If this is the first time
you are accessing
your voicemail box,
the system will then
walk you through the
setup process.
NOTE:
•Please refer to the
Voice Mail Quick
Reference Guide 2010
published at
http://dots.dpsk12.org/
voip for more detail on
your voicemail box.
To access voicemail
from an outside line:
1. Call 720-424-4444.
2. When you hear “To access
your mailbox,” enter your five
digit extension followed by the
# key.
3. Enter your PIN, followed by the
# key.
1 2
3
4
5
6
7
8
910
1112
13
14
6