Cisco Cisco 7940 User manual

Quick Start Guide
Cisco 7940/7960
IP Telephone
Contents:
Cisco 7960/7940 IP Phone Feature and Key Overview....................................................2
Basic Features............................................................................................................................5
Installing the IP Phone and Connecting to the Network.....................................................5
Adjusting the Height of the Footstand...................................................................................5
Placing a Call............................................................................................................................5
Answering a Call.......................................................................................................................5
End a Call..................................................................................................................................6
Soft Features...............................................................................................................................7
Parking a Call............................................................................................................................7
Transferring a Call....................................................................................................................7
Forward All Calls ......................................................................................................................7
Cancel Forward All Calls.........................................................................................................7
Transfer Directly into a Voice mail Account (Optional).......................................................7
Place a Call on Hold ................................................................................................................8
Placing Conference Calls........................................................................................................8
Conference Call Options .........................................................................................................8
INITIATING a Meet-Me Conference Call..............................................................................8
JOINING a Meet-Me Conference Call ..................................................................................8
Call Pickup.................................................................................................................................9
Redial the Last Number Called..............................................................................................9
Information Features...............................................................................................................10
Accessing Online Help ..........................................................................................................10
Call History Features.............................................................................................................10
LCD Display Contrast............................................................................................................10
Setting up Voice Mail.............................................................................................................11
Accessing Voicemail..............................................................................................................11
Checking Voicemail from an Outside Line .........................................................................11
Making Calls from a Corporate Directory...........................................................................11
Audio Features .........................................................................................................................12
Ringing Tone...........................................................................................................................12
Adjusting the Ringer Volume (Review)...............................................................................12
Adjusting the Handset, Speakerphone or Headset Volume (Review)...........................12
Muting a Call (Review) ..........................................................................................................12

2–Quick Start Guide: Cisco 7940/7960 IP Telephone UMR Information Technology

UMR Information Technology Quick Start Guide: Cisco 7940/7960 IP Telephone–3
Cisco 7960/7940 IP Phone Feature and Key Overview
Handset with Indicator Light
Functions like a traditional handset. The light strip at the top of the handset blinks when the phone rings
and will be set to remain lit when you receive a voice mail message.
LCD Screen
Displays features such as time, date, your phone number, caller ID if available, line/call status and soft
key tabs.
Cisco IP Phone Model Type
Indicates your Cisco IP phone model.
Line or Speed Dial Buttons
Opens a new line, speed dials the number on the LCD screen, or ends a call. Cisco IP Phone 7960 has six
lines or speed dial buttons and the 7940 has two.
“Soft Key” Buttons
Four interactive “soft keys” that provide available call features and functions.
Example: Handset on Cradle:
Redial NewCall CfwdAll more
Hold EndCall Resume more
Answer MeetMe Pickup more
GpickUp Trnsfer Park more
Confrn more
(note dark vs. light shading)
Example: Lift the Handset without Dialing anything:
Redial EndCall CfwdAll more
MeetMe PickUp GpickUp more
(note EndCall instead of NewCall)
Example: During a Call:
Hold EndCall Trnsfer more
Park Confrn more
Footstand Adjustment
Allows you to adjust the angle of the phone base.
Directories Button
Provides access to Call Histories and Directories
“?” or “i” Button
Displays help on your LCD screen for a phone button or function.
Setting Button
Provide access to phone settings such as Contrast and Ring Sound, Network Configuration and Status.

4–Quick Start Guide: Cisco 7940/7960 IP Telephone UMR Information Technology
Speaker Button
Toggles the Speaker On and Off.
Mute Button
Toggles the Mute On and Off. Press the MUTE button to prevent the party from hearing you although
you can still hear them. The Mute button changes to red. To turn off mute, press the MUTE button
again.
Headset Button
Toggles the Headset (if connected) On and Off.
Volume Button
Increases or decreases the volume for the handset, headset or speakerphone (depending on which is
being used).
•Press the 6button to decrease the volume of the handset, speakerphone, or headset
•Press the 5button to increase volume of the handset, speakerphone, or headset
•To save the volume setting, press the # key
Messages Button
Provides access to the Voicemail Messaging System.
Navigation Button (Toggle UP/DOWN Key) or “SCROLLKey”
Enables you to scroll through text and select features displayed on the LCD Screen
Dial Pad
Works exactly like the dial pad on a traditionalphone.

UMR Information Technology Quick Start Guide: Cisco 7940/7960 IP Telephone–5
Basic Features
Installing the IP Phone and Connecting to the Network
1. Connect an Ethernet cable to the Network port (middle port) on the phone.
2. Connect the handset and headset (if applicable) to their respective ports.
3. Connect the Ethernet cable from your Desktop PC to the Access Port on the IP Phone (optional).
4. Connect the power plug to the DC48V AC Adapter port (optional).
Note: Before successfully installing the phone, the system administrator must prepare the network
for the phone.
Adjusting the Height of the Footstand
1. Push the footstand adjustment knob on the right-hand side of the phone.
2. With the button depressed, adjust the footstand to the desired height.
3. Depress the footstand adjustment knob.
Placing a Call
There are six options for placing a new call.
•Lift the Handsetand dial the number.
•Press aLine button and dial the number.
•Press the Speaker button and dial the number.
•Press the Headsetbutton and dial the number.
•Press the NewCall soft key and dial the number.
•Press a pre-configured Speed Dialbutton.
Internal Extension:
Dial the 4-digit extension
External Local Call:
Dial 3+ the entire 7-digit phone number
Long Distance :
Dial 3 + 1 the entire 10-digit phone number (area code+ number)
Notes: After you press the 3 (for an outside line) you will hear a dial tone again to let you know you are
accessing anexternal line.
Pick up the handset. If you do not hear a dial tone, press an available line button to begin
making the call.
Press the SPEAKER button. If you do not hear a dial tone, press an available line button to begin
to make the call or press the NewCall soft key. If you do not hear a dial tone, press an
available line button to begin to make the call (the call will dial with the speakerphone on).
Answering a Call
There are four options for answering a call.
•Lift the Handset.
•Press the Answersoft key.
•Press the Speaker button.
•Press the Headset button.

6–Quick Start Guide: Cisco 7940/7960 IP Telephone UMR Information Technology
Notes: If “Line 1” is ringing, pick up the handset and you will be automatically connected to the call.
If any other line is ringing, lift up the handset (or press the SPEAKER button) and press the
Answer soft key, OR press the line button next to the ringing line
End a Call
There are three options for ending a call.
•Hang up the Handset.
•Press the SPEAKER button.
•Press the EndCallsoft key and hang up.

UMR Information Technology Quick Start Guide: Cisco 7940/7960 IP Telephone–7
Soft Features
Parking a Call
Park a call when you want to store the call and then retrieve the call from another IP Phone. Call Park
numbers are pre-configured by your system administrator. Follow the below stepsto park a call:
Step 1) During anactive call, press the more soft key until you see the Park tab.
Step 2) Press the Park tab soft key. The LCD screen displays a special call park number at which the
call is stored.
Step 3) Make a note of the call park number and then hang up. The call is parked at that number,
allowing you to retrieve it from another phone.
Step 4) To retrieve the parked call from another phone, dial the call park number at which the call is
parked.
Note: You have a limited amount of time to retrieve the parked call before it reverts to ringing at its
original destination.
Transferring a Call
Follow these steps to Transfer a call to another extension.
Step 1) While on the call, press the Trnsfer soft key (this places the caller on hold).
Step 2) Dial the office extension to which you want to transfer the call.
Step 3) When it rings on the transferred to extension, pressTrnsfer soft key again, or when the party
answers the call, announce the call and press the Trnsfersoft key again.
Step 4) Hang up the phone or end the call.
Note: If the party refuses the call, press the Resume soft key to return to the original call.
Forward All Calls
Call Forwarding allows you to redirect all incoming calls from your Cisco IP Phone to another number.
Step 1) Press the CFwdALL soft key (you will hear two beeps).
Step 2) Dial the 4-digit extension to which all calls will be forwarded.
Note: Be sure to enter the number exactly as you would if you were placing a call to that number.
After you enter the number, an animated phone icon with a flashing right allow appears in the
upper-right corner of the LCD screen. The LCD also displays a message confirming the number
or extension to which your calls are being forwarded.
Cancel Forward All Calls
Step 1) Press the CfwdAllsoft key (you will hear two beeps).
Note: The flashing right arrow on the LCD display will disappear indicating that Call Forwarding has
been deactivated.
Transfer Directly into a Voice mail Account (Optional)
Step 1) While on the call, press the Trnsfer soft key (this places the caller on hold).
Step 2) Press the * key.
Step 3) Enter the extension of the person you are transferring to (at this point, you may announce the
call, or go directly to step 4.
Step 4) Press the Trnsfersoft key to complete the transfer.

8–Quick Start Guide: Cisco 7940/7960 IP Telephone UMR Information Technology
Place a Call on Hold
Step 1) While on thecall, press the Hold soft key.
Step 2) To return to a call, press the Resume soft key.
Step 3) If multiple calls are on hold, use the SCROLL button to select the desired call then press the
Resume soft key.
Placing Conference Calls
To establish a conference call for the existing call.
Step 1) Press the More soft key and then press the ConFrn soft key (this will automatically select a
new line and place the other party on hold).
Step 2) Dial the 4-digit extension or3+ (local or long distance number).
Step 3) When the party answers, press the ConFrn soft key again and the party will be added to the
conference call.
Step 4) Repeat steps 1 through 3 to add additional parties to the conference call.
Conference Call Options
Notes:To place a conference call on hold, press the Hold soft key (the other parties can talk among
themselves but they cannot hear you).
To place a conference call on speakerphone, press the SPEAKER button.
To mute a conference call on speakerphone, press the MUTE button to turn off the microphone.
Items to Consider for Conference Calls
§Once the conference call initiator disconnects, no new conferees can be added
§When you place a call on hold, a beeping tone is generated every few seconds. Consider using the
mute instead of hold to avoid disrupting other callers.
§To abandon theaddition of a conferee, press the Line button.
INITIATING a Meet-Me Conference Call
In a Meet-Me conference call, participants dial a pre-arranged conference number at a specific time to
meet on a call.
Step 1) Contact the network administrator and obtain a meet-me conference number.
Step 2) Lift the Handset and press themore soft key once to display the Meet-Me tab.
Step 3) Press the Meet-Me soft key.
Step 4) Dial the Meet-Me conference number obtained from the network administrator.
JOINING a Meet-Me Conference Call
Step 1) Dial the conference number provided by the Meet-Me conference initiator.
Note:You will be connected to the conference once the initiator has dialed in and established the Meet-
Me call.

UMR Information Technology Quick Start Guide: Cisco 7940/7960 IP Telephone–9
Call Pickup
Call Pickup allows you to pick up incoming calls within your own group. A “group” is defined by your
system administrator and typically limited to a neighboring offices or cubes within “ringing range” of
each other. Activate call pickup so that an incoming call delivered to another extension in your group
rings on your extension.
Step 1) Pick-up the handset.
Step 2) Press the more key one time.
Step 3) Press the Pickup key. The call now rings on your phone.
Step 4) Press the answerkey and you will be connected to the call.
Group Pickup (Optional)
You can answer a call to your extension outside your call group.
Step 1) As a phone rings at an extension outside of your call group, press aLine button.
Step 2) Press the More key one time.
Step 3) Press the GPickup key.
Step 4) Dial the desired call pickup group number.
Step 5) Answer the incoming call that is redirected to your phone.
Redial the Last Number Called
Redialing the most recently dialed number.
Step 1) Lift the handset and press the Redialsoft key.
Note: You can also press the Redialsoft key to activate the speakerphone and redial the last number
called.

10 –Quick Start Guide: Cisco 7940/7960 IP Telephone UMR Information Technology
Information Features
Accessing Online Help
Can be used in three ways:
1) Pressing the “?”and then any other key about which you would like information.
2) Pressing the “?”button twice quickly to view information about the selected features.
3) Pressing the “?”button twice quickly during an active call to view network statistics about the active
call.
Call History Features
Step 1) To view missed calls, Press theDIRECTORIESbutton.
Step 2) Use the SCROLL button to select the desired call history option: Missed Calls, Received
Calls or Placed Calls.
Step 3) Press the Select soft key to display the desired call history.
Step 4) When you are finished, press the Exitsoft key twice to exit the Directory Menu.
Note: To speed dial a missed call, received call, or placed call, you must edit the number and insert a 9
before the missed call or received call number.
Example:
Step 1) Press the DIRECTORIES button.
Step 2) Use theSCROLL button to select the desired call history (Missed Calls) option in the
Directory Menu.
Step 3) Use theSCROLL button to select the number you want to speed dial.
Step 4) Press the Dialsoft key to speed-dial the selected number.
Notes: For shared lines, missed calls show up on all phones that have the shared line occurrence.
Use the Clear soft key to clear all items in a Missed, Received or Placed category. Entries will
also eventually be deleted as new items fill up the list. Individual Missed, Received or Placed
calls entries on a telephone can not be deleted. They can only be deleted as a group.
LCD Display Contrast
Step 1) Press the SETTINGS button.
Step 2) Use theSCROLL button to select the Contrast option on the Settings Menu.
Step 3) Press the Select soft key to display the contrast settings.
Step 4) Use theUp and Down soft keys to set the desired intensity of the LCD display and press the
OK soft key to save your settings.
Step 5) Press the Save soft key to save your selection and exit the Settings Menu.

UMR Information Technology Quick Start Guide: Cisco 7940/7960 IP Telephone–11
Setting up Voice Mail
Note: The default password for voicemail is “123456”. You will be asked to change this password
during setup. Passwords must be at least six digits long. Set up your personal voicemail using
your primary telephone while using line 1.
Set up your personal voicemail account for the first time. Remember to think about your personal
greeting (greeting callers hear prior to leaving you a voicemail) and write out if needed.
Step 1) Press the Messages button and follow the voice instructions.
Step 2) Press Option 4.
Step 3) Select Option 1 for Greeting Setup.
Step 4) Record your Greeting.
If you forget your password, please contact your network administrator.
Accessing Voicemail
The red light on your Handset lights up when you have a voicemail message and the LCD displays the
number of messages you have received.
Step 1) Press the Messages button and follow the voice instructions.
Step 2) Enter your passcode when requested.
Step 3) Press 1 key to hear your messages.
Checking Voicemail from anOutside Line
Step 1) Dial the external voicemail number (341-7999) or dial one of the main numbers (Operators)
and asked to be transferred to voicemail or when prompted for anextension, enter7999.
Step 2) Press the * key.
Step 3) At the “Enter Your ID Number” prompt, enter your 4-digit phone number.
Step 4) Enter your passcode when prompted.
Step 5) Press 1 to hear your messages.
Making Calls from a Corporate Directory
To find a name and phone number in the IP Phone Corporate Directory:
Step 1) Press the DIRECTORIES button
Step 2) Use theSCROLLbutton to select the Corporate Directory option on the menu.
Step 3) Press the Select soft key to display the directory search options
Step 4) Use the scroll key to select the search option: First Name, Last Name or Number.
Step 5) Use the numbers corresponding to the letterson the dialing pad to enter a name or number
to find it in the directory. It is not necessary to enter a complete query to conduct a search.
Step 6) Then press theSearch soft key to display all names that begin with the letters you chose.
Step 7) Press the Dial soft keyto speed dial a number from the Corporate Directory.
Notes: For example: To spell Becky, press the 2 key twice for a B, press the 3 key twice for an E, press
the 2 key three times for a C, etc.
Only IP Phone Users are listed in this directory.
Doing anunrefined search, the maximum entries that will be returned is two selections of 32
names. This is a protection to prevent network spikes while the Corporate Directory is being
reviewed. Refine searches as needed.

12 –Quick Start Guide: Cisco 7940/7960 IP Telephone UMR Information Technology
Audio Features
Ringing Tone
Changing the Ringer Type.
Step 1) Press the SETTINGS button.
Step 2) Use theSCROLL button to select the Ring Type option on theSettings Menu.
Step 3) Press the Select soft key to display the list of available ring types.
Step 4) Use theSCROLL button to select (highlight) a ring type.
Step 5) Press the Playsoft key to hear a sample of the selected ring type.
Step 6) Press the Select soft key and then press the OKsoft key to save your selection.
Step 7) Press the Save soft key to save your selection and exit the Settings Menu.
Adjusting the Ringer Volume (Review)
Step 1) While the phone is not on a call, press the Up or Down Volume keys to hear asample ring.
Step 2) As the ring plays, press the Up or Down Volume keys to adjust the volume to the desired
level.
Step 3) To save the ring volume, press theSettings button and then press the Save soft key.
Adjusting the Handset, Speakerphone or Headset Volume (Review)
Step 1) During a call, press the Up or Down Volume keys to increase or decrease the volume of your
Headset, Speakerphone or Headset.
Step 2) To save the ring volume, press theSettings button and then press theSave soft key.
Note: The volume settings will only be changed for the option being used.
Muting a Call (Review)
Step 1) During a call, press the Mute button.
Step 2) To disengage mute, press the Mute again.
Note: If you are using mute along with the speakerphone, lifting the handset will disengage the mute:
NOTES:
IT Solutions Center Number: 341-HELP
On-line phone tutorials are available at:
http://campus.umr.edu/it/telecom/IPTelephonyDocs
1870 Miner Circle
101 Computer Science Building
573-341-HELP
campus.umr.edu/helpdesk
help.umr.edu