
Cleveland
™
Project ________________________________
Item __________________________________
Quantity_______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio,U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site:www.ClevelandRange.com
Email: Steam@ClevelandRange.com
GAS KETTLES
Cleveland Standard Features
nSupport Legs with level adjustable feet, flanged for floor
bolting.
nType 304 Stainless Steel construction, with #4 finish on
kettle and supports.
nTilting Mechanism with permanently lubricated, Self-locking,
Worm Drive of space saving design.
n50 psi Steam Jacket Rating and Safety Valve.
nStandard for natural gas operation.
nLarge pouring lip for easier, faster, pouring. Heavy-duty
Rolled Rim design provides strong reinforcement, prevents
damages from abuse.
nStandard voltage is 115 volts, 60 Hz, single phase, supplied
with cord and plug.
nHigh efficiency Power Burner Heating System (62% to 65%
efficiency).
nFast Heat-up and Recovery Time, 140, 000 BTU firing rate.
nAutomatic Hot-Surface Ignition System.
nSteam Jacket permanently filled with treated, distilled water.
Venting and/or refilling not required.
nSplash-Proof Solid State Controls, for Temperature and Low
Water Safety, in a plug-in Control Module.
nControl panel Includes:
•Precise, consistent temperature control: less than ± 1ºC
variance (ideal for simmering).
•L.E.D. Indicators for Heat Cycle and Low Water Warning.
•Power "On/Off" Switch.
nTypical approvals include AGA, CSA, CE, NSF and ASME.
Options & Accessories
p316 Stainless Steel Liner (316)
p2" Tangent Draw-Off(TD2)
pKettle Markings (KM)
pSpring Assist Cover (CHS)
pLift Off Cover (CL)
pBasket Strainer (BS)
pPan Carrier (PCK)
Cleveland Gas-Fired Tilting Kettle, Model KGL-40-TSH, 37 1/2" rim height,
Type 304 Stainless Steel and Supports, Fully Steam Jacketed, 50 psi Steam
Jacket Rating, 140,000 BTU Double Pass Steam Generator, Power Burner
System, Splash Proof Solid State Temperature Controls, Automatic Hot-
Surface Ignition System.
pMeasuring Strip (MS)
pFood Strainer (FS)
pSteam Control Kit (SCK1)
pHot and cold water faucet (DPK), or cold water (SPK).
Requires faucet bracket (FBKT)
p240 Volt, Single Phase Option
pPropane Gas Operation (LP)
pCorrectional Packages
pHeat Deflector Shield (HS001)
Short Form Specifications
Shown with optional Spring Assisted
Cover and 2" Tangent Draw-Off Valve
SHORT SERIES™GAS-FIRED KETTLE
38˝ RIM HEIGHT, FULL STEAM JACKETED
TILTING, “
SPLASH PROOF SERIES”
40 GALLONS (150 LITERS)
MODEL: cKGL-40-TSH
SECT. IX PAGE 11
0707