Cleveland KDL-40-TSH User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity_______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio,U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site:www.ClevelandRange.com
Email: [e-mail]
DIRECT STEAM KETTLES
Cleveland Standard Features
nSupport Legs with level adjustable feet, flanged for floor
bolting.
nType 304 Stainless Steel construction, with #4 finish on
kettle and supports.
nTilting Mechanism with permanently lubricated, Self-locking,
Worm Drive of space saving design.
n50 psi Steam Jacket Rating
n50 psi Chrome - Plated Safety Valve.
nLarge pouring lip for easier, faster, pouring. Heavy-duty
Rolled Rim design provides strong reinforcement, prevents
damages from abuse.
nCondensate Drain Valve with insulated handle.
nSteam Control Inlet Valve.
nTypical approvals include NSF and ASME.
Options & Accessories
p316 Stainless Steel Liner (316)
p2" Tangent Draw-Off Valve (TD2)
pKettle Markings (KM)
pSpring Assist Cover (CHS)
pLift Off Cover (CL)
pBasket Strainer (BS)
pMeasuring Strip (MS)
pFood Strainer (FS)
pFactory Installed Steam Control Kit, consisting of a Steam
Trap, condensate Strainer and Check Valve. (SCK1)
pHot and cold water faucet (DPK), or cold water (SPK).
Requires faucet bracket (FBKT)
pPan Carriers (PCK)
pKettle Accessory Kit (KAK)
pTri-Basket Strainer Support System (TBS)
pPressure Reducing Valve for regulating incoming steam
pressure over 45psi (PRVK)
pCorrectional Packages
pHeat Deflector Shield (HS001)
Cleveland Direct Steam Tilting Kettle, Model KDL-___-TSH, 35" rim height.
Type 304 Stainless Steel and Supports. Fully Steam Jacketed, 50 psi Steam
Jacket Rating
;heavy re-enforced Rolled Rim. Tri-Leg Type with
adjustable Flanged Feet.
Short Form Specifications
Shownwith optional Spring Assisted
Cover and 2" Tangent Draw-Off Valve
MODELS:cKDL-40-TSH
cKDL-60-TSH
cKDL-80-TSH
SHORT SERIES™DIRECT STEAM KETTLES
35˝ RIM HEIGHT, STATIONARY
FULL STEAM JACKETED
40 or 60 GALLONS (150 or 225 LITERS)
SECT. XPAGE 21
0707

DIMENSIONS
SPECIFICATIONS UTILITIES
FOOT LOCATION &
FLOOR DRAIN DETAIL
(KDT-60-TSH, KDT-80-TSH)
FLANGED
FOOT DETAIL
(KDT-40-TSH)
SOLID
FOOT DETAIL
(KDT-60-TSH, KDT-80-TSH)
FOOT LOCATION &
FLOOR DRAIN DETAIL
(KDT-40-TSH)
45 1/2
48 5/8
51 1/2
00
(NOT TO SCALE)
SECT
.XP AGE 22
0707
Litho in U.S.A.
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.
CAPACITIES: (in 8 oz. servings,
other sizes may be calculated.)
40 Gallon / 150 liters . . . 640 servings
60 Gallon / 225 liters . . . 960 servings
80 Gallon / 300 liters . . . 1280 servings