Cleveland 300-SSM User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site: www.ClevelandRange.com
Email: [e-mail]
MODULAR BASES
MODELS:c300-SSM c600-SSM
c450-SSM c900-SSM
Cleveland Standard Features
nType 430 Stainless Steel exterior enclosure; table top and
sink with #4 finish
n6" Stainless Steel Legs with level adjustment
nHot and Cold water faucet with swing spout
nDrain outlet connection with 1 1/2" drain spud and strainer
nEnclosed cabinet styling
Options & Accessories
pDouble joint swing spout for extended reach, up to 18
inches
pCold only single faucet with swing spout (450mm)
pRemovable storage shelf
p10" adjustable legs (LF10)
pFlanged Feet (FF)
pStainless Steel base frame (FSS)
Shall be CLEVELAND Model _____ -SSM with sink having 1 1/2" spud drain
connection, hot and cold water faucet with swing spout. Type 430 Stainless
Steel sink, Table Top, exterior enclosure and 6" level adjustable legs.
Short Form Specifications
SECT. VII PAGE 19
0707
SINK SPACER MODULE WITH DRAIN
WIDTHS OF 300, 450, 600 or 900MM
ENCLOSED TYPE

3/8" NPT
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are UL/NSF#4.
(NOT TO SCALE)
SECT
.VII P AGE 20
0707
Litho in U.S.A.
Right - 0
Left - 0
Rear - 0