Climbing Technology ROLLNLOCK User manual

CLIMBING TECHNOLOGY by ALUDESIGN S.p.A. via Torchio 22, 24034 - Cisano B.sco (BG) ITALY
Phone: [phone] / VAT code: 01893550168 / Fiscal code: 01605500139 / Website: www.climbingtechnology.com
Domestic: [email protected] / Export: [email protected] / Training Center: [email protected]
®
Climbing Technology has voluntarily issued a request for inspection of the ROLLNLOCK pulley/rope clamp (Ref. No. 2D652) by
the user.
One of our customers has detected a defect in the functioning of the “sheave position lever” (F). This defect can lead to an acci-
dental locking of the sheave position lever on its pin (H) on the plate.
ROLLNLOCK
REQUEST FOR INSPECTION
As a result of this defect, when using the device in “hauling pulley” mode, the lever may inadvertently engage the pin suddenly
disabling the locking function and releasing the load or person.
The products affected by this defect are those with the following batch numbers: 0120; 0220; 0320; 0121; 0221.
Attention! In order to distinguish, with the same batch, a functioning product from a defective one, we have inserted a symbol on
the marking. Whoever is in possession of a product marked with this symbol will not have to carry out any inspection.
To date, no accidents or injuries are known.
We ask you to carry out the inspection procedure indicated below. If the product in your possession is affected by this problem,
please contact us to arrange shipment at our expense:
• e-mail: c[email protected] / [email protected]
• phone: [phone] – ext. 4 from Italy – ext. 5 from abroad
Please clearly indicate both on the package and inside it, your details (name and surname, address, e-mail, phone number). We
need this information for the delivery of the replacement product.
Climbing Technology ensures the safety and quality of all its products. Your safety is our highest priority.
We apologize for any inconvenience caused. The replacement product will be shipped to you as soon as possible.
COM22-2D652ENCT_rev.0 10-21
0120
0220
0320
0121
0221
A
C
E
G
H
B
D
F
R
O
L
L
N
L
O
C
K
M
M
-
Y
Y
Y
Y
A
A
A
A
A
A
A
BBBB
UIAA
R
O
L
L
N
L
O
C
K
M
M
-
Y
Y
Y
Y
A
A
A
A
A
A
A
BBBB
UIAA
R
O
L
L
N
L
O
C
K
M
M
-
Y
Y
Y
Y
A
A
A
A
A
A
A
BBBB
UIAA
R
O
L
L
N
L
O
C
K
M
M
-
Y
Y
Y
Y

CLIMBING TECHNOLOGY by ALUDESIGN S.p.A. via Torchio 22, 24034 - Cisano B.sco (BG) ITALY
Phone: [phone] / VAT code: 01893550168 / Fiscal code: 01605500139 / Website: www.climbingtechnology.com
Domestic: [email protected] / Export: [email protected] / Training Center: [email protected]
®
INSPECTION PROCEDURE
Use one hand to hold the device by the connection hole. With the other
hand, rotate the cam outward and press down firmly with the palm.
Finally, release the cam.
Place the device on a stable surface near an edge as shown.
If the cam returns to its original position, it means that the product is not
defective and can be used freely.
ROLLNLOCK
REQUEST FOR INSPECTION
If the cam goes over the pin on the plate and remains stuck in that posi-
tion, it means that the product is defective: it can no longer be used under
any circumstances and it must be returned to the company.
For a better understanding of the procedure please have a look at the dedicated video:
https://youtu.be/9_REFm9DdxM
OK!
NO!