Cocoon DY180381 User manual

Scan this code
or search for
Cocoon Connect
Only remove battery tabs or plug in sensor when beginning to connect
that device
Follow steps 4 - 6 for each device you want to set up
ONLY TURN ON ONE DEVICE AT A TIME
The LED on each of the Smart Security Devices should be
flashing twice per second
If not, press the Reset Button on the device and hold for six
seconds. The LED should now flash twice per second
Before you begin, make sure you have:
1. A mobile device - Android (V4.1 or later) or iOS (V8 or later)
2. Each of your Security Sensors
3. A Wi-Fi connection (have the password handy)
4. Download the Cocoon Connect app
For detailed instructions and videos, visit www.cocoonproducts.com.au
First time users:
Register an account and follow the remaining prompts on screen
3. Connect One device
at a Time 4. Begin pairing mode
1. BEFORE YOU START 2. App Setup

1. Add device manually
2. Select Sensor & Security
Door Sensor = Door / Window Sensor
Motion Sensor = Sensor (Wi-Fi)
Siren = Alarm (Wi-Fi)
ONLY ADD ONE DEVICE AT A TIME
Each Smart Security device will stop flashing to indicate it has
been paired successfully
2. SELECT SMART
DEVICE
1. ADD NEW
DEVICE
If you have any issues with this step, ensure your password is correct
If you are still having issues, please check your Instruction Manual
Use, manage and control your Smart Security Kit from the Cocoon
Connect app
5. Add the device 6. Connect device to Wifi 7. device added successfully 8. control your devices