Come.up Winch APE-19 User manual

Hydraulic Hoist
Model: APE-19
OMSU-200 205 bar
PN: 681930 Std. drum
681940 Long drum
Introduction
Feature
Rated line lift: 1,900 kg ( 4,190 lb ) single line at the top layer of rope
Line speed : 46.4 mpm / 153 fpm single line at the top layer of rope
Operation pressure: 205 bar ( 2,973 psi )with maximum back pressure on
return line of 5 bar
Brake: Multi-disc brake and counterbalance valve providing
full 100% braking
Recommended
wire rope:
12 mm ( 1/2” ) x 48 m ( 157’ ) for std. drum
12 mm ( 1/2” ) x 82 m ( 269’ ) for long drum
1,960 N/mm2grade a minimum breaking strength of
100 KN required
Hydraulic system: PTO/power take off unit driven pump
Unpacking
．Assembly………………………………………………………… 1pc
．Counterbalance valve…………………………………………………. 1pc
Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless operation may result in personal injury hazards or property
damage.
Information requesting or parts ordering
Please specify the followings information:
．PN
．Part description
．Serial number
．Replacement part number
．Quantity for each part
Installation
Before using the winch, make sure all components have no corrosion or
damaged; the environment should be clear and dry.
Mounting
．Hoist shall be mounted on a flat and hard
surface.
．Hoist should be mounted as closed to center and
as perpendicular as possible to the direction of
the line pull.
．Wire rope shall be wound in an under-wound
orientation only.
．Four (4) M12 , 8.8 grade w/76 N-m torque setting (maximum) high tensile
steel bolts must be used in order to sustain the loads imposed on the winch
mounting.
Hydraulic System
( Powered by PTO / power take off unit driven pump )
The installation of the counterbalance valve supplied is required for 100% braking

Warning
．The rated line pull and speed are based on the first layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Warranty
Comeup Industries Inc. takes the responsibility for all parts and components
to be free from defects in materials and workmanship appearing under
normal use for one year from the date of purchase.
Parts List
Item No. Description Part No. Qty
1 Hydraulic motor kit for OMSU-200 882899 1
2 Motor fix plate kit 882903 1
3 Multi-disc brake kit 882905 1
4 Drum bushing 882931 2
5 Metallic gasket 882932 2
6 Drum kit, for std. 882909 1
Drum kit, for long 882910
7 Thimble 882934 1
8 1st pinion kit, for std. drum 882911 1
1st pinion kit, for long drum 882912
9 1st ring gear kit 882913 1
10 Gearbox fix plate kit 882914 1
11 Base plate kit, for std. drum 882915 2
Base plate kit, for long drum 882916
12 Tie bar kit, for std. drum 882917 2
Tie bar kit, for long drum 882918
Assembly