Comeup CEP-1000-14M User manual

Electric Grooved Winch
Model: CEP
-
1000
-
14
M
P/N: 275817 380V50Hz
XFeature
Lifting Capacity 1,000 kg, double fall load
Power Source 3 phase 50 Hz 380V
Motor 2 hp x 4 p
Drum Grooved
Wire Rope 8 mm x 34 m
Lifting Height 14 m
Lifting Speed 7.5 m/min, double fall load
Brake Electromagnetic spring-applied failsafe brake
Control Pendant switch CPB-213 w/cord 2.0 mm2
x 5C x 3 m
XRead this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage
XWarning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on single fall rope on the drum.
．The rope winding on the drum shall remain 3 wraps from the drum.
XInformation requesting or parts ordering
Please specify the followings information:
．Winch PN
．Serial number
．Part description
．Replacement part number
．Quantity for each part

XMaintenance and Inspection
Classification of checks
Periodical
Daily One
month
Three
month
One
year
Checking Item Checking
Method Checking Reference
◎Marking
Label and the
like Visual Existence of label
◎
Winding-in
direction of
wire rope
Visual ,
measuring
Fleet angle
θ=within 3.0 degree
◎
Installation Loosing and
centre run-out
foundation
Checking of
installing bolts Existence of abnormality
◎Working Manual Reasonable actuation
◎
Condition of
clamping of
wiring
Decomposition
checking
Confirming of accuracy
of fastening condition
◎Wearing of
contact point
Decomposition
checking
To be free from
remarkable wearing and
damage
◎Outer damage
of lead Visual To be free from exposure
of conductive wire
◎◎
Attaching
condition of
earth line
Visual
Existence of
abnormalities of
connecting wires
◎
Control
Switch
Condition of
insulation
Measure with
500v insulation-
Resistance tester
1MΩmin
◎Condition
of insulation
Measure with
resistance tester 1MΩmin
◎
Motor Staining
damage
Decomposition
check
Existence of
abnormalities
◎Braking gap Measuring Within 0.35 mm
◎Wearing of
disc
Decomposition
check
To be free from
remarkable wear and
damage
◎◎
Brake
Performance Visual
Distance to be not more
than 1.5% of rope length
to be wound-in during 1
minute
◎Damage ,
wearing
Decomposition
check
To be free from
remarkable wear and
damage
◎
Gear
Condition of
grease feeding Measuring
Existence of suitability of
amount and deterioration
with grease Mobilux
EP2.Shell Unedo 2 or
Esso Beacon EP2

Parts List
XWiring Diagram
Item No. Description Part No. Qty
1 Induction motor kit 380V 880827 1
2 Control kit 881999 1
2-1 Control box 880957 1
2-2 Remote control, CPB-213 881998 1
3 Motor support rack kit 882002 1
4 Drum kit 882001 1
5 Connect shaft kit 880808 1
6 Gearbox support rack kit 882003 1
7 2nd stage carrier kit 881663 1
8 1st stage carrier kit 881664 1
9 Gear box kit 880814 1
10 1st shaft kit 880815 1
11 Gearbox rear cover kit 880816 1
15 Brake kit DC 200V 882220 1
15-1 Brake disc 882046 1
15-2 Brake coil DC 200V 882221 1
17 Brake cover kit 880822 1
18 Wire rope 882000 2
19 Base plate kit 882004 1

Winch Assembly