Comeup CWG-30375 User manual

Electric Winch
Model: CWG-30375
PN: w/3.8kw x 4P motor
153750 220V50Hz 155730 380V50Hz
156581 400V50Hz 152547 415V50Hz
154123 415V50Hz
Introduction
XFeature
Lifting capacity: 900 kg at 50Hz wire rope top layer
Lifting height: 58 m
Lifting speed: 4P: 13-20.6 m/min at 50Hz ; 6P: 8.5-13.5 m/min at 50Hz
Brake: Electromagnetic spring-applied failsafe brake
Control: Pendant switch powers the winch
XUnpacking
．Winch assembly 1pc
．Wire rope 10 mm x 60 m w/safety hook 1pc
．Low voltage control ass’y LV-320 1pc
．Pendant switch PB-306 w/cord 1.25 mm2
x 3C x 3 m 1pc
XRead this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
XInformation requesting or parts ordering
Please specify the followings information:
．Winch PN
．Serial number
．Part description
．Replacement part number
．Quantity for each part

Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
XPerformance
XWiring Diagram
Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on the top layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Winch Model CWG-30375
Motor kw x p 3.8 x 4 2.2 x 6
Size(mm) 10.0
Recommend
Wire Rope Breaking (kg) 4,640
Rated Load
(kg) 50Hz 1,426 Rated Load (kg) 50Hz 1,244 Rated Load (kg) 50Hz 1,103
4P 13 4P 14.9 4P 16.8
Speed
(m/min) 50Hz 6P 8.5 Speed
(m/min) 50Hz 6P 9.8 Speed
(m/min) 50Hz 6P 11
1st
Layer
Rope-Winding Cumulating
Sum(m) 10
2nd
Layer
Rope-Winding Cumulating
Sum(m) 20
3rd
Layer
Rope-Winding
Cumulating Sum(m) 33
Rated Load
(kg) 50Hz 991 Rated Load (kg) 50Hz 900
4P 18.7 4P 20.6
Speed
(m/min) 50Hz 6P 12.2 Speed (m/min) 50Hz 6P 13.5
4th
Layer
Rope-Winding Cumulating
Sum(m) 46
5th
Layer
Rope-Winding Cumulating
Sum(m) 60

Parts List
Part No. configurations:
Standard Value for brake coil (50Hz):
Voltage 220V 380V 400V 415V 440V
Black & Blue wires 25Ω96Ω105Ω106Ω115Ω
Black & Red wires 11Ω42Ω48Ω47Ω51Ω
Red & Blue wires 14Ω54Ω60Ω60Ω65Ω
Item No. Description Part No. Qty
1 Motor kit As arranged 1
2 Motor support rack kit 880739 1
3 Drum kit 880740 1
4 Connect shaft kit 880741 1
5 Tie bar 880742 4
6 Gearbox support rack kit 880743 1
7 2nd stage carrier kit 881579 1
8 Ring gear kit 880746 1
9 1st stage carrier kit 881580 1
10 1st shaft kit 880749 1
11 Brake base kit 880750 1
12 Brake kit As arranged 1
12-1 Brake disc 880751 1
12-2 Brake coil As arranged 1
13 Brake rear cover 880752 1
14 Wire rope w/hook 880753 1
15 Low voltage control ass’y LV-320 As arranged 1
15-1 Remote control,PB-306 881048 1
16 Base plate kit 880755 1
Cycle Voltage Kw x p Motor
50 Hz 220/380 V 3.8 x 4 880758
50 Hz 200 / 400 V 3.8 x 4 881363
50 Hz 415 V 3.8 x 4 880759
Voltage Brake kit Brake coil LV-320
220 V/ 50Hz 880764 880768 882151
380 V/ 50Hz 881340 880769 881821
400 V/ 50Hz 881341 881364 881822
415 V/ 50Hz 881342 880770 881823

Winch Assembly